table of contents
| HACKRF_SWEEP(1) | User Commands | HACKRF_SWEEP(1) |
NAME¶
hackrf_sweep - control frequency sweep of hackrf
DESCRIPTION¶
hackrf_sweep Usage:
- [-h] # this help [-d serial_number] # Serial number of desired HackRF [-a amp_enable] # RX RF amplifier 1=Enable, 0=Disable [-f freq_min:freq_max] # minimum and maximum frequencies in MHz [-p antenna_enable] # Antenna port power, 1=Enable, 0=Disable [-l gain_db] # RX LNA (IF) gain, 0-40dB, 8dB steps [-g gain_db] # RX VGA (baseband) gain, 0-62dB, 2dB steps [-n num_samples] # Number of samples per frequency, 8192-4294967296 [-w bin_width] # FFT bin width (frequency resolution) in Hz [-1] # one shot mode [-N num_sweeps] # Number of sweeps to perform [-B] # binary output [-I] # binary inverse FFT output -r filename # output file
Output fields:¶
- date, time, hz_low, hz_high, hz_bin_width, num_samples, dB, dB, . . .
Usage:¶
- [-h] # this help [-d serial_number] # Serial number of desired HackRF [-a amp_enable] # RX RF amplifier 1=Enable, 0=Disable [-f freq_min:freq_max] # minimum and maximum frequencies in MHz [-p antenna_enable] # Antenna port power, 1=Enable, 0=Disable [-l gain_db] # RX LNA (IF) gain, 0-40dB, 8dB steps [-g gain_db] # RX VGA (baseband) gain, 0-62dB, 2dB steps [-n num_samples] # Number of samples per frequency, 8192-4294967296 [-w bin_width] # FFT bin width (frequency resolution) in Hz [-1] # one shot mode [-N num_sweeps] # Number of sweeps to perform [-B] # binary output [-I] # binary inverse FFT output -r filename # output file
Output fields:¶
- date, time, hz_low, hz_high, hz_bin_width, num_samples, dB, dB, . . .
SEE ALSO¶
The primary source of documentation is the wiki on github:
| July 2021 | hackrf_sweep |