GENSIO_EVENT_READ¶

Called when data is read from the I/O device.

If err is zero, buf points to a data buffer and buflen is the number of bytes available.

If err is set, buf and buflen are undefined and you should not use them or modify them. err is a standard gensio errno.

If err is non-zero, you must set the number of bytes consumed in buflen. Note that you must disable read if you don't consume all the bytes or in other situations where you don't want the read handler called. auxdata, if not NULL, may contain information about the message, like if it is out of band (oob) data. See information on the specific gensio for details.

Note that only one read callback is allowed to run at a time on a gensio.

If an error is reported in err, then the gensio will be closed. This is used to report that the other end closed the connection (GE_REMCLOSE), or that other internal errors occurred.

You should always return zero, it used to not matter, but it does now.

GENSIO_EVENT_WRITE_READY¶

Called when data can be written to the I/O device.

Note that only one write callback is allowed to run at a time on a gensio.

Unlike Unix-like systems, a write handler will be called (if enabled) if the lower layer has an exception. This is necessary because we don't have a separate exception handler coming from the lower layer. But this lets the write operation return a failure if something has gone wrong.

You should always return zero, it used to not matter, but it does now.

GENSIO_EVENT_NEW_CHANNEL¶

A new channel has been created by the remote end of the connection. The new channel gensio is in buf and must be cast. Information about the channel will be passed in auxdata, see documentation on the particular gensio for details. If this returns an error (non-zero) the channel is shut down, though in the future specific error returns may have different behavior. You must return GE_NOTSUP (like you should for all unhandled events) if you don't support this event. All other error returns besides zero and GE_NOTSUP are reserved.

GENSIO_EVENT_SEND_BREAK¶

Got a request from the other end to send a break. Telnet client or server.

Blocked if gensio read is disabled.

GENSIO_EVENT_AUTH_BEGIN¶

Authorization has begun, the username and service is available but nothing else.

There are a few special return values from this event:

GE_AUTHREJECT

- Fail the connection, but continue to go through the motions. This should be called if the user was invalid or data wasn't properly provided.

0

- authorization has succeeded. No more authentication is required, but the protocol may still go through the motions of the protocol.

GE_NOTSUP

- Just continue with authentication.

Any other error will terminate the connection, these should generally be things like out of memory and such, NOT authentication failures of any kind.

certauth only

GENSIO_EVENT_PRECERT_VERIFY¶

The connection has received a certificate but has not verified it yet. This lets the user modify the certificate authority based on certificate information.

Return values are the same as GENSIO_EVENT_AUTH_BEGIN.

ssl and certauth

GENSIO_EVENT_POSTCERT_VERIFY¶

The connection has received a certificate and has verified it. The verification may have failed. This lets the user handle their own verification override. err will be one of the following:

0

on verification success.

GE_CERTNOTFOUND

if no certificate was found

GE_CERTREVOKED

if the if the certificate was revoked

GE_CERTEXPIRED

if the certificate has expired

GE_CERTINVALID

for other errors.

Any other error will terminate the connection, these should generally be things like out of memory and such, NOT authentication failures of any kind.

auxdata[0] will be an error string (or NULL if none available). Make sure to check if auxdata is NULL before indexing auxdata[0].

Return values are:

0

- Authentication successed (even if an error was reported).

GE_NOTSUP

- Continue with the authentication process. Password authentication may occur, for instance, if an error was reported.

GE_AUTHREJECT

- Fail the authentication. No more authentication will occur.

ssl and certauth

GENSIO_EVENT_PASSWORD_VERIFY¶

A password has been received from the remote end, it is passed in buf. The callee should validate it. If doing 2-factor auth, you should also fetch the 2-factor data with the GENSIO_CONTROL_2FA control and handle that here, too. If this function is called, GENSIO_EVENT_2FA_VERIFY is not called. The length is passed in *buflen. Note that the buf is nil terminated one past the length. Return values are:

0

- The password verification succeeds.

GE_NOTSUP

- Fail the validation, but the connection shutdown will depend on the setting of allow-authfail.

GE_AUTHREJECT

- Reject the authorization for some other reason besides failing validation.

Any other error will terminate the connection, these should generally be things like out of memory and such, NOT authentication failures of any kind.

certauth only

GENSIO_EVENT_REQUEST_PASSWORD¶

On the client side of an authorization, the remote end has requested that a password be sent. buf points to a buffer of *buflen bytes to place the password in, the user should put the password there and update *buflen to the actual length.

Return 0 for success, or any other gensio error to fail the password fetch.

GENSIO_EVENT_REQUEST_2FA¶

On the client side of an authorization, the remote end has requested two-factor authentication data, but it has not been supplied already. buf points to a pointer to a buffer (unsigned char **) that you should return. It should be allocated with the zalloc function of the os_functions in use. *buflen is where to put the size of the buffer. This buffer will be zeroed and freed when done.

Return 0 for success, or any other gensio error to fail the 2FA fetch.

GENSIO_EVENT_2FA_VERIFY¶

A 2-factor auth has been received from the remote end and passed as part of the password transfer. This is only called if the login was validated with a certificate, this is called to handle 2-factor auth with a certificate. The 2fa data is passed in buf. The callee should validate it. The length is passed in *buflen. Note that the buf is nil terminated one past the length. Return values are:

0

- The verification succeeds.

GE_NOTSUP

- Fail the validation, but the connection shutdown will depend on the setting of allow-authfail.

GE_AUTHREJECT

- Reject the authorization for some other reason besides failing validation.

Any other error will terminate the connection, these should generally be things like out of memory and such, NOT authentication failures of any kind.

certauth only

GENSIO_EVENT_PARMLOG¶

When parsing a gensio string, this will be called if the gensio detects an error in the initial parsing or initial configuration. This is called only during the allocation ( str_to_gensio() or equivalent). Logging this information will make it easier for users to find out what's wrong with their gensio strings.

The buf parameter contains a pointer to the following structure:

struct gensio_parmlog_data {
const char *log;
va_list args;
};

which can be printed with normal vprintf() and the like.

GENSIO_EVENT_WIN_SIZE¶

The other end of the connection is reporting a window size change. Currently only on telnet with RFC1073 enabled.

GENSIO_EVENT_LOG¶

Used to report general logs in gensios while processing. Can be called any time the gensio exists.

The buf parameter contains a pointer to the following structure:

struct gensio_log_data {
const char *log;
va_list args;
};

which can be printed with normal vprintf() and the like.

SERIAL PORT CONTROLS¶

These are controls for serial port settings. These are received on the server side only. It should respond by setting the value (if possible and the value isn't zero) and responding with the current value with sergensio_xxx().

If the server receives a zero value for any of this, it should just report the value and not change anything.

GENSIO_EVENT_SER_BAUD
GENSIO_EVENT_SER_DATASIZE
GENSIO_EVENT_SER_PARITY
GENSIO_EVENT_SER_STOPBITS
GENSIO_EVENT_SER_FLOWCONTROL
GENSIO_EVENT_SER_IFLOWCONTROL
GENSIO_EVENT_SER_SBREAK
GENSIO_EVENT_SER_DTR
GENSIO_EVENT_SER_RTS

For baud, databits, and stopbits, the value is an integer with the number.

Parity values can be:
GENSIO_SER_PARITY_NONE
GENSIO_SER_PARITY_ODD
GENSIO_SER_PARITY_EVEN
GENSIO_SER_PARITY_MARK
GENSIO_SER_PARITY_SPACE

Flow control values can be:
GENSIO_SER_FLOWCONTROL_NONE
GENSIO_SER_FLOWCONTROL_XON_XOFF
GENSIO_SER_FLOWCONTROL_RTS_CTS

Input flow control values can be:
GENSIO_SER_FLOWCONTROL_DCD
GENSIO_SER_FLOWCONTROL_DTR
GENSIO_SER_FLOWCONTROL_DSR

For values that are on/off (the rest), use the following:
GENSIO_SER_ON
GENSIO_SER_OFF

SIGNATURE¶

GENSIO_EVENT_SER_SIGNATURE is received on the server side only and is a request for the signature. The server should respond by send the signature with sergensio_signature(). No value is passed in this case.

STATE FUNCTIONS¶

GENSIO_EVENT_SER_MODEMSTATE_MASK
GENSIO_EVENT_SER_LINESTATE_MASK
These are received on the server side to request updating the mask of reported values. The server should respond by returning the current mask with the sergensio_modemstate or sergensio_linestate functions. The server need not handle all the bits requested by the user.

GENSIO_EVENT_SER_MODEMSTATE
GENSIO_EVENT_SER_LINESTATE

On the client side, these are reporting current modemstate and linestate changes as an unsigned integer. See sergensio_modemstate(3) and sergensio_linestate(3) for a meaning of the bits in the integer.

OTHER SERIAL PORT CONTROLS¶

These are server-only, these are received requesting the various operations. The server should do them, but no response is required. You may notice that break is not here, break is handled through the GENSIO_EVENT_SEND_BREAK event.

GENSIO_EVENT_SER_FLOW_STATE
GENSIO_EVENT_SER_FLUSH

SYNC¶

GENSIO_EVENT_SER_SYNC is a special operation that comes in when a TCP sync event is received. It may be received on both sides. A server should send a break. The client can do whatever it wants with the information, that is not defined by the RFC2217 specification.