CSS-style Handler Options¶

Handler descriptions in Marpa::R2::HTML are key-value pairs in a hash. In each pair, the key is a CSS-style handler specifier, and the value is a closure, which is called the action for the handler.

Specifiers are "CSS-style" -- their syntax imitates some of the basic cases of CSS specifiers. No attempt is planned to implement the full CSS specifier syntax.

Supported specifier syntaxes are as follows:

Tagname Specifiers

        table  => sub { return Marpa::R2::HTML::original() },
    

If a specifier contains no special characters it is taken as the name of an element. (A "special" character is anything except an alphanumeric, a hyphen or an underscore.) Consistent with HTML::Parser's default behavior, element names must be specified in lowercase.

Class Specifiers

A specifier which is a dot or period followed by a name will match any element whose class attribute is the same as the specified name. For example, the specifier "".delete_me"" will match any element whose class attribute is ""delete_me"".

Tagname-Class Pair Specifiers

A specifier which contains a dot or period somewhere other than the first position (such as ""span.label"") is treated as a dotted tagname-class pair. Its action will be called for any component whose tagname and class attribute both match the specifiers.

The Tagname Wildcard Specifier

A specifier of just an asterisk (""*"") matches all elements. Be careful to note that matching all elements is not the same as matching all components. The element wildcard specifier will not match any pseudoclasses.

Pseudoclass Specifiers

     ':COMMENT' => sub { return q{} }
    

A specifier which begins with a colon ("":"") matches a pseudoclass. Marpa::R2::HTML defines pseudoclasses to deal with terminals and other non-element components of the HTML hierarchy.

Conflicting Specifiers¶

At most one semantic action is called for each component. Where an element component matches several specifiers, the action is picked based on the most specific match.

1. Matches by tagname-class pair are the most specific.

2. Matches by class are the next most specific.

3. Matches by tagname are considered less specific than matches by class.

4. The wildcard match is the least specific.

Here's an example:

    my $html = <<'END_OF_HTML';
    <span class="high">High Span</span>
    <span class="low">Low Span</span>
    <div class="high">High Div</div>
    <div class="low">Low Div</div>
    <div class="oddball">Oddball Div</div>
    END_OF_HTML
    our @RESULTS = ();
    Marpa::R2::HTML::html(
        \$html,
        {   q{*} => sub {
                push @RESULTS, 'wildcard handler: ' . Marpa::R2::HTML::contents();
            },
            'div' => sub {
                push @RESULTS, '"div" handler: ' . Marpa::R2::HTML::contents();
            },
            '.high' => sub {
                push @RESULTS, '".high" handler: ' . Marpa::R2::HTML::contents();
            },
            'div.high' => sub {
                push @RESULTS,
                    '"div.high" handler: ' . Marpa::R2::HTML::contents();
            },
            '.oddball' => sub {
                push @RESULTS,
                    '".oddball" handler: ' . Marpa::R2::HTML::contents();
            },
            'body' => sub {undef},
            'head' => sub {undef},
            'html' => sub {undef},
            'p'    => sub {undef},
        }
    );

Here is what $result would contain after the above code was run:

    ".high" handler: High Span
    wildcard handler: Low Span
    "div.high" handler: High Div
    "div" handler: Low Div
    ".oddball" handler: Oddball Div

Details of the Specifier Syntax¶

For elements and class names only alphanumerics, hyphens and underscores are supported. Elements must be specified in lowercase, but they will match tagnames in the original document on a case-insensitive basis.

Forcing element names to be lowercase follows the default behavior of HTML::Parser, which coerces all tagnames to lowercase. This is consistent with the HTML standards. It is not consistent with the XML standards, and an option to configure this behavior may be added in the future.

Pseudoclass names special to Marpa::R2::HTML are case-sensitive, and must be all uppercase. Lowercase is reserved for CSS pseudoclasses. The CSS standard specifies that its pseudoclass names are case-indifferent. No CSS pseudoclasses are supported at this writing.

:CDATA¶

The ":CDATA" pseudoclass specifies the action for CDATA terminals. Its action is called once for each non-whitespace raw "text" event that is not reclassed as cruft. (Raw text is text in which any markup and entities should be left as is.)

More precisely, a ":CDATA" terminal is created from any HTML::Parser "text" event that has the "is_cdata" flag on; that contains a non-whitespace character as defined in the HTML 4.01 specification (<http://www.w3.org/TR/html4/struct/text.html#h-9.1>); and that is not reclassed as cruft.

:COMMENT¶

The ":COMMENT" pseudoclass specifies the action for HTML comments. Its action is called once for every "HTML::Parser" "comment" event that is not reclassed as cruft.

:CRUFT¶

The ":CRUFT" pseudoclass specifies the action for cruft. Its action is called once for every "HTML::Parser" event that Marpa::R2::HTML reclasses as cruft.

Marpa::R2::HTML reclasses terminals as cruft when they do not fit the structure of an HTML document. One example of a terminal that Marpa::R2::HTML would reclass as cruft is a "</head>" end tag in the HTML body.

Reclassing terminals as cruft is only done as the last resort. When it can, HTML::Parser forgives violations of the HTML standards and accepts terminals as non-cruft.

Cruft is treated in much the same way as comments. It is preserved, untouched, in the original text view.

:DECL¶

The ":DECL" pseudoclass specifies the action for SGML declarations. Its action is called once for every "HTML::Parser" "declaration" event that is not reclassed as cruft.

:PCDATA¶

The ":PCDATA" pseudoclass specifies the action for PCDATA terminals. Its action is called once for each non-whitespace non-raw "text" event that is not reclassed as cruft.

More precisely, a ":PCDATA" terminal is created from any HTML::Parser "text" event that has the "is_cdata" flag off; that contains a non-whitespace character as defined in the HTML 4.01 specification (<http://www.w3.org/TR/html4/struct/text.html#h-9.1>); and that is not reclassed as cruft.

Markup and entities in ":PCDATA" text are expected to be interpreted eventually, but it can be counter-productive to do this during parsing. An application may, for example, be rewriting a document for display on the web. In that case it will often want to leave markup and entities for the client's browser to interpret.

Marpa::R2::HTML leaves interpretation of markup and entities entirely to the application. An application which chooses to do the interpretation itself may do it in the actions, or deal with it in post-processing. CPAN has excellent tools for this, some of which are part of HTML::Parser.

:PI¶

The ":PI" pseudoclass specifies the action for SGML processing instructions. Its action is called once for every HTML::Parser "process" event that is not reclassed as cruft.

:PROLOG¶

The ":PROLOG" pseudoclass specifies the action for SGML prolog. This is the part of the HTML document which precedes the HTML root element. Components valid in the prolog include SGML comments, processing instructions and whitespace.

:TOP¶

The action specified for the ":TOP" pseudoclass will be called once and only once in every parse, and will be the last action called in every parse. The ":TOP" component is the entire physical document, including the SGML prolog, the root element, and the SGML trailer. All the other HTML components in a document will be descendants of the ":TOP" component.

The ":TOP" action is unique, in that there is always an action for it, even if one is not specified. The "html" method returns the value returned by the ":TOP" action. The default ":TOP" action returns a reference to a string with the literal text value of all of its descendants.

:TRAILER¶

The ":TRAILER" pseudoclass specifies the action for SGML trailer. This is the part of the HTML document which follows the HTML root element. Components valid in the trailer include SGML comments, processing instructions, and whitespace. Cruft can also be found here, though for Marpa::R2::HTML that is a last resort.

:WHITESPACE¶

A Marpa::R2::HTML ":WHITESPACE" terminal is created for every HTML::Parser "text" event that is entirely whitespace as defined in the HTML 4.01 specification (<http://www.w3.org/TR/html4/struct/text.html#h-9.1>) and that is not reclassed as cruft. Whitespace is acceptable in places where non-whitespace is not, and the difference can be very significant structurally.

The Original View¶

The original view sees the text of a component as it was originally passed to the parser. The original view never changes. The original view is seen through the "Marpa::R2::HTML::original" API method.

The Terminals View¶

The terminals view sees the terminals corresponding to the original text of a component. The terminals view never changes. The terminals view is usually seen as part of other views.

At this writing the API does not contain a "pure" terminals view method. For a terminals view of the whole HTML document, HTML::Parser does the job with significantly lower overhead. For views and sections of views with no values defined, the descendants view (described below) is equivalent to the terminals view.

The Values View¶

When actions are called, they return a value. If that value is defined, it becomes visible to the values view of its ancestors. The values view of a component sees the visible values for its descendants.

The values view is an array, with the values ordered according to the lexical order of the components whose actions returned them. If no descendants have visible values, then the values view is a zero-length array.

The values view is hierarchical. When a component produces a visible value, it makes the values of its descendants disappear. That is, whenever the semantic action for a component X returns anything other than a Perl "undef", it has two effects:

• That return value becomes the visible value associated with component X.
• All the values previously visible due to semantic actions for the descendants of component X disappear.

Values which disappear are gone forever. There is no mechanism to make them "reappear".

As a special case, if an action for a component returns a Perl "undef", not only do the values of all its descendants disappear, the component for the action also will not appear in the values view. When its semantic action returns "undef", a component permanently "drops out" of the values view taking all descendants with it. The original view is seen through the "Marpa::R2::HTML::values" API method.

The Literal View¶

The literal view can be thought of as a mix between the original view and the values view. It sees a text string, like the original view. But unlike the original view, the literal view includes the visible values.

Values appear in the literal view in stringized form. For sections of the original text without visible values, the literal view is the same as the original view. In all Marpa::R2::HTML's views, whether descendants are seen as text or values, they are seen in the original lexical order. The literal view is seen through the "Marpa::R2::HTML::literal" API method.

The Descendants View¶

Just as the literal view can be thought of as a mix between the original view and the values view, the descendants view can be thought of a mix between the terminals view and the values view.

The descendants view sees an array of elements with data for each of the component's descendants, in lexical order. Where a value is visible, the descendants view sees data for the component with the visible value. Where no value is visible, the descendants view sees data for the terminals. This means that when no values are visible, the descendants view is the same as the terminals view.

The descendants view is implemented via the "Marpa::R2::HTML::descendants" method. It is the most fine-grained and detailed way to look at the descendants of a component. The descendants view can do anything that the other views can do, but the other views should be preferred when they fit the application. Other views are typically more intuitive and efficient.

Views versus Syntax Trees¶

Views are a generalization of the traditional method for processing semantics: syntax trees. The values view is the view that most closely resembles a syntax tree. But there are important differences.

In its purest form, the syntax tree model required the semantic actions to define exactly how many and what kind of immediate children each node had. Each node in a syntax tree worked with its immediate children. Children in a syntax tree appeared as values.

The values view, on the other hand, sees all its descendants, not just its immediate children, but only if they make themselves visible. Because of this, the values view lends itself to being mixed with other views. The values view allows pieces of the tree to decide when they will come into sight and when they will fall out of view.

Views and Efficiency¶

In most applications, views are more efficient than syntax trees. In terms of Marpa::R2::HTML views, traditional syntax tree processing corresponds most closely to the values view when every component in the parse has a visible value. For Marpa::R2::HTML this is close to the worst case.

Marpa::R2::HTML optimizes for unvalued components. Unvalued components are represented as terminal spans. Adjacent descendant spans are automatically merged. This means the size and time required do not increase as processing rises up the component hierarchy.

Terminals views are calculated on a just-in-time basis when they are requested through the action API. The terminals view is produced quickly from the merged terminal span.

Original views are also calculated on a just-in-time basis as requested. Each terminal tracks the text it represents as a character span. The original text can be quickly reconstructed as the text in the source document from the first character location of its component's first terminal to the last character location of the component's last terminal.

When a handler does not need to return a value, the most efficient thing to do is to return "undef". This reverts that component and all its descendants to the efficient unvalued representation.

API Static Methods¶

Marpa::R2::HTML::attributes

Returns a hash ref to the attributes of the start tag. This hash ref is exactly the hash ref returned for the "attr" arg specification of HTML::Parser. The "attributes" API method returns an empty hash if there were no attributes, if there was no start tag for this element, or if the current component is not an element.

Marpa::R2::HTML::contents

For an element, returns the literal view of the contents. The contents of an element are its entire text except for its start tag and its end tag. For an non-element component, returns undef.

Marpa::R2::HTML::descendants

This static method implements the descendants view. It takes one argument, the "dataspec". The dataspec is a string specifying the data to be returned for each descendant. The "descendants" method returns a reference to an array with one element per descendant, in lexical order. Each element in the array is a reference to an array whose elements are the per-descendant data requested in the string.

The descendant data specification string has a syntax similar to that of the "argspec" strings of HTML::Parser. Details of that syntax are given below

Marpa::R2::HTML::end_tag

For an element with an explicit end tag, returns the original text of the end tag. For non-element components, returns undef. For elements with no end tag, returns undef.

Marpa::R2::HTML::is_empty_element

For an element, returns a Perl true value if the element is empty, a defined Perl false value otherwise. For non-element components, returns undef.

Marpa::R2::HTML::literal

The "Marpa::R2::HTML::literal" method implements the literal view. Returns a string containing the literal view of the component -- its text as modified by any the visible values of its descendants.

Marpa::R2::HTML::literal_ref

Returns a reference to a string containing the literal view of the component. This can be useful for very long strings.

Marpa::R2::HTML::offset

Returns the start offset of the component. This is a zero-based location in the source document. Some components are zero-length, containing none of the tokens in the physical input. The "Marpa::R2::HTML::offset" method return "undef" for these.

Marpa::R2::HTML::original

The "Marpa::R2::HTML::original" method implements the original view. Returns a string containing the original view of the component -- its text unchanged from the source document.

Marpa::R2::HTML::start_tag

For an element with an explicit start tag, returns the original text of the start tag. For non-element components, returns undef. For elements with no explicit start tag, returns undef.

Marpa::R2::HTML::tagname

For an element component, returns its tagname. There is a tagname even if there are no explicit tags. Tagname is determined based on structure. For non-element components, returns undef.

Marpa::R2::HTML::title

Returns the value of the title attribute. For a non-element component, returns undef. If there was no explicit start tag, returns undef. If there was no title attribute, returns undef.

Marpa::R2::HTML::token_type

For a token, returns the token type. The token types are the event types from HTML::Parser: ""T"" for text, ""S"" for a start tag, ""E"" for an end tag, ""PI"" for a processing instruction, ""D"" for an SGML declaration, and ""C"" for a comment. If the component is an element or some other non-token, returns undef.

Marpa::R2::HTML::values

The "Marpa::R2::HTML::values" method implements the values view. It returns a reference to an array of the descendant values visible from this component, in lexical order. No elements of this array will be undefined. The array will be zero length if no descendant has a visible value.

Dataspecs¶

    Marpa::R2::HTML::descendants('token_type,literal,element')

The data specification string, or dataspec, is a comma separated list of descendant data specifiers. The "Marpa::R2::HTML::descendants" method takes a dataspec as its argument. The "Marpa::R2::HTML::descendants" method returns a reference to an array of references to arrays of per-descendant data. The contents of the per-descendant data arrays and their order is as specified by the dataspec. These are the valid descendant data specifiers:

"element"

For an element descendant, returns the tagname. A valid tagname is returned even if there were no explicit tags. For non-element descendants, returns undef.

"literal"

Returns a string containing the literal view of the descendant.

"original"

Returns a string containing the original view of the descendant.

"token_type"

If the descendant is a terminal, returns the token type. Token types are as described for the "Marpa::R2::HTML::token_type" API method. For components with visible values, returns undef.

"value"

For element descendants with a value, returns that value. In all other cases, returns undef.

The Instance Hash¶

Each Marpa::R2::HTML instance makes available a per-instance variable as a scratchpad for the application: $Marpa::R2::HTML::INSTANCE. Each call to Marpa::R2::HTML::html creates a $Marpa::R2::HTML::INSTANCE variable which is reserved for that application using the "local" keyword. Marpa::R2::HTML::html initializes it to an empty hash, but after that does not touch it. When programming via side effects is more natural than passing data up the parse tree (and it often is), $Marpa::R2::HTML::INSTANCE can be used to store the data.

Ordinarily, $Marpa::R2::HTML::INSTANCE is destroyed, with the rest of the parse instance, when "Marpa::R2::HTML::html" returns. But it can be useful for the ":TOP" semantic action to return $Marpa::R2::HTML::INSTANCE as the value of the parse.

Undefined Actions versus Actions Which Return "undef"¶

It is worth emphasizing that the effect of not defining a semantic action for a component is different from the effect of defining a semantic action which returns a Perl "undef". The difference lies in what happens to any visible values of the descendants of that component.

Where no action is defined for a component, it leaves all that component's views as they were before. That is, all values which were visible remain visible and no new values become visible. When an action is defined for a component, but that action returns undef, no new values become visible, and all descendant values which were visible disappear.

Root Element versus :TOP Pseudoclass¶

It is important to understand the very special function of the ":TOP" component, and to avoid confusing it with the HTML root element. The most important distinctions are that

• The semantic action for ":TOP" pseudoclass is always the last action to be called in a parse.
• The ":TOP" component is always the entire HTML document. This can be true of the root element, but it is not true in all cases.
• The value that the action for the ":TOP" component returns becomes the value that the Marpa::R2::HTML::html method returns.

The root element is the HTML element whose tagname is ""html"", though its start and end tags are optional and can be omitted even in strictly valid HTML. Tags or no tags, every HTML document has a root element. (The ":TOP" component is not an element, so it does not have a tagname and never has tags.)

The root element is always a descendant of the ":TOP" component. The SGML prolog and SGML trailer are always descendants of the ":TOP" component. The SGML prolog and SGML trailer are never descendants of the root element.

If an action for the root element is specified, it will also be called once and only once in every parse. An action for the root element can be specified in same way as actions for other elements, using its tagname of ""html"". An element wildcard action also becomes the action for the root element, if no more specific handler declaration takes precedence.

A ":TOP" action will be called once and only once in every parse. The ":TOP" action is unique in that there is a default action. No other component has a default action.

Tags versus Structure¶

Where tags conflict with structure, HTML::Parser follows structure. "Following structure" means that, for example, if semantic actions for the "html", "head", and "body" elements exist, they will be called once and only once during every parse.

Consider this short and very defective HTML document:

    <title>Short</title><p>Text</head><head>

HTML::Parser starts the HTML document's body when it encounters the "<p>" start tag. That means that, even if they were in the right order, the two "head" tags cannot be fit into any reasonable parse structure.

If an action is specified for the "head" element, it will be called for the actual header, and the original view of the "head" element component will be the text ""<title>Short</title>"". The action for the "head" element will not be called again. The two stray tags, "</head>" and "<head>", will be treated as descendants of the "body" element, and reclassed as "cruft" terminals.

Explicit and Implicit Elements¶

If a semantic action is specified for a tagname, it is called whenever an element is found with that tagname, even if there are no explicit tags for that element. The HTML standards allow both start and end tags to be missing for "html", "head", "body" and "tbody" elements. Marpa::R2::HTML is more liberal, and will recognize virtual tags for "table", "tr", and "td" elements as required to repair a defective table.

Marpa::R2::HTML is more even liberal about recognizing virtual end tags than it is about start tags. Virtual start tags are recognized only for the specific elements listed above. For any non-empty HTML element, there is some circumstance under which Marpa::R2::HTML will recognize a virtual end tag. At end of file, as one example, Marpa::R2::HTML will do its best to produce a balanced HTML structure by creating a virtual end tag for every element in the stack of currently active elements.