table of contents
hexahedron(6rheolef) | hexahedron(6rheolef) |
NAME¶
hexahedron - reference element (rheolef-7.2)
DESCRIPTION¶
The edge reference_element(6) is K = [-1,1].
x2
4----------7
|\\ |\\
| \\ | \\
| \\ | \\
| 5------+---6
| | | |
0---+------3 - | ---> x1
\\ | \\ |
\\ | \\ |
\\| \\|
1----------2
\\
x0
The orientation is such that triedra (01, 03, 04) is direct and all faces,
see from exterior, are in the direct sens. See
P. L. Georges,
Generation automatique de maillages,
page 24, coll RMA, 16, Masson, 1994.
This three-dimensional reference_element(6) is then transformed, after
the Piola geometrical application, as a hexahedron in a 3D physical space,
as a geo_element(6).
Curved high order Pk hexahedra (k >= 1) in 3D geometries are supported. These hexahedra have additional edge-nodes, face-nodes and internal volume-nodes. These nodes are numbered as: first vertex, then edge-node, following the edge numbering order and orientation, then face-nodes following the face numbering order and orientation, and finally the face internal nodes, following the hexahedron lattice.
4----19----7
|\\ |\\
|16 23 | 18
12 \\ 21 15 \\
| 5----17+---6
|22 | 26 | 25|
0---+-11---3 |
\\ 13 24 \\ 14
8 | 20 10|
\\| \\|
1-----9----2
P2
Notice that the edge-nodes and face-nodes numbering slightly differ from
those used in the gmsh mesh generator when using high-order elements.
This difference is handled by the msh2geo_1 mesh file
converter.
IMPLEMENTATION¶
This documentation has been generated from file fem/geo_element/hexahedron.icc
const size_t dimension = 3; const Float measure = 8; const size_t n_vertex = 8; const point vertex [n_vertex] = {
point(-1,-1,-1 ),
point( 1,-1,-1 ),
point( 1, 1,-1 ),
point(-1, 1,-1 ),
point(-1,-1, 1 ),
point( 1,-1, 1 ),
point( 1, 1, 1 ),
point(-1, 1, 1 ) }; const size_t n_face = 6; const size_t face [n_face][4] = {
{0, 3, 2, 1 },
{0, 4, 7, 3 },
{0, 1, 5, 4 },
{4, 5, 6, 7 },
{1, 2, 6, 5 },
{2, 3, 7, 6 } }; const size_t n_edge = 12; const size_t edge [n_edge][2] = {
{0, 1 },
{1, 2 },
{2, 3 },
{3, 0 },
{0, 4 },
{1, 5 },
{2, 6 },
{3, 7 },
{4, 5 },
{5, 6 },
{6, 7 },
{7, 4 } };
AUTHOR¶
Pierre Saramito <Pierre.Saramito@imag.fr>
COPYRIGHT¶
Copyright (C) 2000-2018 Pierre Saramito <Pierre.Saramito@imag.fr> GPLv3+: GNU GPL version 3 or later <http://gnu.org/licenses/gpl.html>. This is free software: you are free to change and redistribute it. There is NO WARRANTY, to the extent permitted by law.
Version 7.2 | rheolef |