table of contents
PI500_VFD(1) | HAL Component | PI500_VFD(1) |
NAME¶
pi500_vfd - Powtran PI500 Modbus driver
SYNOPSIS¶
pi500_vfd
PINS¶
- pi500-vfd.N.commanded-frequency float in
- Frequency of vfd
- pi500-vfd.N.run bit in
- run the vfd
- pi500-vfd.N.enable bit in
- 1 to enable the vfd. 0 will remote trip the vfd, thereby disabling it.
- pi500-vfd.N.is-running bit out
- 1 when running
- pi500-vfd.N.is-at-speed bit out
- 1 when running at assigned frequency
- pi500-vfd.N.is-ready bit out
- 1 when vfd is ready to run
- pi500-vfd.N.is-alarm bit out
- 1 when vfd alarm is set
- pi500-vfd.N.motor-current float out
- Output current in amps
- pi500-vfd.N.heatsink-temp float out
- Temperature of drive heatsink
- pi500-vfd.N.watchdog-out bit out
- Alternates between 1 and 0 after every update cycle. Feed into a watchdog component to ensure vfd driver is communicating with the vfd properly.
PARAMETERS¶
- pi500-vfd.N.mbslaveaddr u32 rw
- Modbus slave address
LICENSE¶
GPLv2 or greater
2024-07-13 | LinuxCNC Documentation |