Scroll to navigation

mia-3dcost-translatedgrad(1) General Commands Manual mia-3dcost-translatedgrad(1)

NAME

mia-3dcost-translatedgrad - Evaluate the cost gradient between two images and convert it to a spline representation.

SYNOPSIS

mia-3dcost-translatedgrad -i <in-file> -r <ref-file> -o <out-file> [options]

DESCRIPTION

mia-3dcost-translatedgrad Evaluate the cost gradient between two images and evaluate the transformation related gradient for it based on the given transformation model.

OPTIONS

input image
For supported file types see PLUGINS:3dimage/io
reference image
For supported file types see PLUGINS:3dimage/io
output vector field
For supported file types see PLUGINS:3dtransform/io
norm image of the spline transformed gradient
For supported file types see PLUGINS:3dimage/io
norm image of the cost gradient
For supported file types see PLUGINS:3dimage/io
Transformation the gradient relates to
For supported plugins see PLUGINS:3dimage/transform
cost function to use
For supported plugins see PLUGINS:3dimage/cost

Help & Info

verbosity of output, print messages of given level and higher priorities. Supported priorities starting at lowest level are:

trace ‐ Function call trace
debug ‐ Debug output
info ‐ Low level messages
message ‐ Normal messages
warning ‐ Warnings
fail ‐ Report test failures
error ‐ Report errors
fatal ‐ Report only fatal errors
print copyright information

print this help

-? --usage
print a short help

print the version number and exit

Processing

Maxiumum number of threads to use for processing,This number should be lower or equal to the number of logical processor cores in the machine. (-1: automatic estimation).

PLUGINS: 1d/splinebc

Spline interpolation boundary conditions that mirror on the boundary

(no parameters)
Spline interpolation boundary conditions that repeats the value at the boundary

(no parameters)
Spline interpolation boundary conditions that assumes zero for values outside

(no parameters)

PLUGINS: 1d/splinekernel

B-spline kernel creation , supported parameters are:

d = 3; int in [0, 5]
Spline degree.

OMoms-spline kernel creation, supported parameters are:

d = 3; int in [3, 3]
Spline degree.

PLUGINS: 3dimage/cost

local normalized cross correlation with masking support., supported parameters are:

w = 5; uint in [1, 256]
half width of the window used for evaluating the localized cross correlation.

Spline parzen based mutual information., supported parameters are:

cut = 0; float in [0, 40]
Percentage of pixels to cut at high and low intensities to remove outliers.

mbins = 64; uint in [1, 256]
Number of histogram bins used for the moving image.

mkernel = [bspline:d=3]; factory
Spline kernel for moving image parzen hinstogram. For supported plug-ins see PLUGINS:1d/splinekernel

rbins = 64; uint in [1, 256]
Number of histogram bins used for the reference image.

rkernel = [bspline:d=0]; factory
Spline kernel for reference image parzen hinstogram. For supported plug-ins see PLUGINS:1d/splinekernel

normalized cross correlation.

(no parameters)
This function evaluates the image similarity based on normalized gradient fields. Given normalized gradient fields $ _S$ of the src image and $ _R$ of the ref image various evaluators are implemented., supported parameters are:

eval = ds; dict
plugin subtype (sq, ds,dot,cross). Supported values are:
ds ‐ square of scaled difference
dot ‐ scalar product kernel
cross ‐ cross product kernel

3D image cost: sum of squared differences, supported parameters are:

autothresh = 0; float in [0, 1000]
Use automatic masking of the moving image by only takeing intensity values into accound that are larger than the given threshold.

norm = 0; bool
Set whether the metric should be normalized by the number of image pixels.

3D image cost: sum of squared differences, with automasking based on given thresholds, supported parameters are:

rthresh = 0; double
Threshold intensity value for reference image.

sthresh = 0; double
Threshold intensity value for source image.

PLUGINS: 3dimage/io

Analyze 7.5 image

Recognized file extensions: .HDR, .hdr

Supported element types:
unsigned 8 bit, signed 16 bit, signed 32 bit, floating point 32 bit, floating point 64 bit

Virtual IO to and from the internal data pool

Recognized file extensions: .@

Dicom image series as 3D

Recognized file extensions: .DCM, .dcm

Supported element types:
signed 16 bit, unsigned 16 bit

HDF5 3D image IO

Recognized file extensions: .H5, .h5

Supported element types:
binary data, signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32 bit, signed 64 bit, unsigned 64 bit, floating point 32 bit, floating point 64 bit

INRIA image

Recognized file extensions: .INR, .inr

Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32 bit, floating point 32 bit, floating point 64 bit

MetaIO 3D image IO using the VTK implementation (experimental).

Recognized file extensions: .MHA, .MHD, .mha, .mhd

Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32 bit, floating point 32 bit, floating point 64 bit

NIFTI-1 3D image IO. The orientation is transformed in the same way like it is done with 'dicomtonifti --no-reorder' from the vtk-dicom package.

Recognized file extensions: .NII, .nii

Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32 bit, signed 64 bit, unsigned 64 bit, floating point 32 bit, floating point 64 bit

VFF Sun raster format

Recognized file extensions: .VFF, .vff

Supported element types:
unsigned 8 bit, signed 16 bit

Vista 3D

Recognized file extensions: .-, .V, .VISTA, .v, .vista

Supported element types:
binary data, signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32 bit, floating point 32 bit, floating point 64 bit

3D image VTK-XML in- and output (experimental).

Recognized file extensions: .VTI, .vti

Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32 bit, floating point 32 bit, floating point 64 bit

3D VTK image legacy in- and output (experimental).

Recognized file extensions: .VTK, .VTKIMAGE, .vtk, .vtkimage

Supported element types:
signed 8 bit, unsigned 8 bit, signed 16 bit, unsigned 16 bit, signed 32 bit, unsigned 32 bit, floating point 32 bit, floating point 64 bit

PLUGINS: 3dimage/transform

Affine transformation (12 degrees of freedom), supported parameters are:

imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc

imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel

Restricted rotation transformation (1 degrees of freedom). The transformation is restricted to the rotation around the given axis about the given rotation center, supported parameters are:

axis =(required, 3dfvector)
rotation axis.

imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc

imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel

origin =(required, 3dfvector)
center of the transformation.

Restricted affine transformation (3 degrees of freedom). The transformation is restricted to the rotation around the given axis and shearing along the two axis perpendicular to the given one, supported parameters are:

axis =(required, 3dfvector)
rotation axis.

imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc

imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel

origin =(required, 3dfvector)
center of the transformation.

Rigid transformation, i.e. rotation and translation (six degrees of freedom)., supported parameters are:

imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc

imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel

origin = [[0,0,0]]; 3dfvector
Relative rotation center, i.e. <0.5,0.5,0.5> corresponds to the center of the volume.

Rotation transformation (three degrees of freedom)., supported parameters are:

imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc

imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel

origin = [[0,0,0]]; 3dfvector
Relative rotation center, i.e. <0.5,0.5,0.5> corresponds to the center of the volume.

Restricted transformation (4 degrees of freedom). The transformation is restricted to the rotation around the x and y axis and a bending along the x axis, independedn in each direction, with the bending increasing with the squared distance from the rotation axis., supported parameters are:

imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc

imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel

norot = 0; bool
Don't optimize the rotation.

origin =(required, 3dfvector)
center of the transformation.

Free-form transformation that can be described by a set of B-spline coefficients and an underlying B-spline kernel., supported parameters are:

anisorate = [[0,0,0]]; 3dfvector
anisotropic coefficient rate in pixels, nonpositive values will be overwritten by the 'rate' value..

debug = 0; bool
enable additional debugging output.

imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc

imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel

kernel = [bspline:d=3]; factory
transformation spline kernel. For supported plug-ins see PLUGINS:1d/splinekernel

penalty = ; factory
transformation penalty energy term. For supported plug-ins see PLUGINS:3dtransform/splinepenalty

rate = 10; float in [1, inf)
isotropic coefficient rate in pixels.

Translation (three degrees of freedom), supported parameters are:

imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc

imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel

This plug-in implements a transformation that defines a translation for each point of the grid defining the domain of the transformation., supported parameters are:

imgboundary = mirror; factory
image interpolation boundary conditions. For supported plug-ins see PLUGINS:1d/splinebc

imgkernel = [bspline:d=3]; factory
image interpolator kernel. For supported plug-ins see PLUGINS:1d/splinekernel

PLUGINS: 3dtransform/io

Binary (non-portable) serialized IO of 3D transformations

Recognized file extensions: .bbs

Virtual IO to and from the internal data pool

Recognized file extensions: .@

Vista storage of 3D transformations

Recognized file extensions: .v, .v3dt

XML serialized IO of 3D transformations

Recognized file extensions: .x3dt

PLUGINS: 3dtransform/splinepenalty

divcurl penalty on the transformation, supported parameters are:

curl = 1; float in [0, inf)
penalty weight on curl.

div = 1; float in [0, inf)
penalty weight on divergence.

norm = 0; bool
Set to 1 if the penalty should be normalized with respect to the image size.

weight = 1; float in (0, inf)
weight of penalty energy.

EXAMPLE

Evaluate the SSD cost between src.v and ref.v and store the gradient gradient corresponding to a spline transformation in grad.v3dt.

mia-3dcost-translatedgrad -i src.v -o grad.v3dt -f spline:rate=8 -c ssd

AUTHOR(s)

Gert Wollny

COPYRIGHT

This software is Copyright (c) 1999‐2015 Leipzig, Germany and Madrid, Spain. It comes with ABSOLUTELY NO WARRANTY and you may redistribute it under the terms of the GNU GENERAL PUBLIC LICENSE Version 3 (or later). For more information run the program with the option '--copyright'.

v2.4.7 USER COMMANDS