Scroll to navigation

RAWTOMINC(1) MINC User's Guide RAWTOMINC(1)

NAME

rawtominc - converts a stream of binary image data to a minc format file

SYNOPSIS

rawtominc [options] output.mnc [[sz4] sz3] sz2 sz1

DESCRIPTION

Rawtominc reads a stream of binary data (byte, short, long, float or double) from standard input (unless the -input option is used) and writes it into the minc format file output.mnc. The user specifies the dimension sizes from slowest varying to fastest varying. At least two dimensions must be given (an image) but there can be up to four. Options give the user control over dimension names, data types and voxel to world coordinate conversion. Vector type data (such as RGB pixel data) can be read in as well.

PIXEL VALUE SPECIFICATION

Pixel values are specified by a type and a sign (e.g. signed short integer). They are also characterized by a range of legal values. For example, many scanners produce images stored with short integer pixel values. Some have values in the range 0 to 4095, others 0 to 32000, others -32768 to 32767. This range is the valid range, specified by the -range option (for floating point values, the valid range is the maximum and minimum of the whole dataset). Rawtominc allows the user to specify both the input type, sign and range as well as the output type, sign and range (read short values, store byte values, for example).

There is a further twist. Integer pixel values are generally taken to be simply scaled pixel representations of real (meaningful) physical values. Floating point values are taken to be the real value itself. Thus floating point values are scanned for the maximum and minimum, since they could be anything (they are stored in the MINC variables image-max and image-min). Integer values, however, are not scanned by default, since their range can be given by an option. To force scanning of integer values when the maximum and minimum are not known (some scanners produce files with variable ranges), use the option -scan_range.

WORLD COORDINATES

World coordinates refer to millimetric coordinates relative to some physical origin (either the scanner or some anatomical structure). Voxel coordinates are simply the indices into the image volume of a given voxel. It is worth describing briefly how MINC coordinate conversions work since this will affect how successful the new MINC file will be.

Each dimension of MINC image is specified by name - the spatial dimensions are xspace, yspace and zspace. The convention is that positive xspace coordinates run from the patient's left side to right side, positive yspace coordinates run from patient posterior to anterior and positive zspace coordinates run from inferior to superior. For each of these spatial dimensions, the world coordinate conversion is specified by a pair of attributes: step and start. The xspace world coordinate, for example, is calculated using x = v*step + start, where x is the x world coordinate and v is the voxel count (starting at zero). Thus the magnitude of the step attribute specifies the distance between voxels and the sign of the step attribute specifies the orientation of the axis. Programs will use this information to display images with the correct aspect ratio and orientation, so make sure that you get it right. Many scanners store transverse images with the first pixel at the patient's anterior/right side, so it would be necessary to give negative x and y step values. Other conventions have the opposite: first pixel at patient's posterior/left, so step values are positive. Sometimes the first slice is inferior, so the z step should be positive. Other times it is superior, so z step is negative.

The image axes do not have to be aligned with the world coordinate axes. The axis directions are recorded in the file as direction cosines - unit vectors - one for each spatial axis. In this case, the step and start attributes described in the previous paragraph refer to distances along the axis, not to coordinates of the first voxel. This makes them invariant under a change of axis direction (the whole coordinate system can in fact be rotated just by changing the direction cosines). If the coordinate of the first voxel is known, then it can be converted (projected) to a set of start values by using the -origin option.

OPTIONS

Dimension ordering

Transverse images : [[time] z] y x (Default)
Sagittal images : [[time] x] z y
Coronal images : [[time] y] z x
Time ordered images : [[z] time] y x
Dimension order : [[time] x] y z
Dimension order : [[time] x] z y
Dimension order : [[time] y] x z
Dimension order : [[time] y] z x
Dimension order : [[time] z] x y
Dimension order : [[time] z] y x
Specify an arbitrary dimension order, given by an comma-separated list of between 2 and 4 dimension names.
Gives the size of a vector dimension (always the fastest varying dimension). Default is no vector dimension.

Input data type and range

8-bit integer values (default).
16-bit integer values.
32-bit integer values.
Superseded by -int.
Single-precision floating point values.
Double-precision floating point values.
Values are signed integers (default for short and long). Ignored for floating point types.
Values are unsigned integers (default for byte). Ignored for floating point types.
specifies the valid range of pixel values. Default is the full range for the type and sign. This option is ignored for floating point values.
specifies the real range of image values that corresponds to the pixel values of option -range. Default is to not store the real image minimum and maximum. If -scan_range is used, then the image minimum and maximum corresponding to the scanned pixel minimum and maximum are calculated and stored. This option is ignored for floating point values.
Input values (either -short or -int) need to be converted between Motorola (big-endian) and Intel (little-endian) data format. If "short" input is specified, adjacent bytes are swapped. If "int" input is specified, inner and outer byte pairs are swapped. This option has no effect with other input types.

Output data type and range

Store 8-bit integer values (default is input type).
Store 16-bit integer values (default is input type).
Store 32-bit integer values (default is input type).
Superseded by -oint.
Single-precision floating point values (default is input type).
Double-precision floating point values (default is input type).
Values are signed integers (default for short and long). Ignored for floating point types. If output type is not specified, then default is input sign type.
Values are unsigned integers (default for byte). Ignored for floating point types. If output type is not specified, then default is input sign type.
specifies the valid range of pixel values. Default is the full range for the type and sign. This option is ignored for floating point values. If output type and sign are not specified, then the default is the input range.

Scanning integers for range

Do not scan integer values for their minimum and maximum - assume that the -range option gives the appropriate range of pixel values (default). No rescaling of pixel values is done (unless the output type differs from the input type) and the created images are assumed to have a real (not pixel value) minimum and maximum of zero and one.
Integer values are scanned for their minimum and maximum. Pixel values are rescaled to give the full range of pixel values and the real minimum and maximum are set to the pixel minimum and maximum (unless -real_range is used). This should be equivalent to converting the input to a floating point type and reading it in with -float -oshort (for example) assuming that -real_range is not used.

Writing output file

-2
Create MINC 2.0 format output files.
Overwrite existing minc file (default).
Don't overwrite existing minc file.

Reading from input file

Read input data from inputfile instead of standard input.
Skip the first length bytes of the input.

World coordinate conversion

Step size for x dimension (default = none).
Step size for y dimension (default = none).
Step size for z dimension (default = none).
Starting coordinate for x dimension (default = none). This is a distance parallel to the axis.
Starting coordinate for y dimension (default = none). This is a distance parallel to the axis.
Starting coordinate for z dimension (default = none). This is a distance parallel to the axis.
Direction cosines for x dimension (default = none).
Direction cosines for y dimension (default = none).
Direction cosines for z dimension (default = none).
Specify the spatial coordinates of the first voxel. If the direction cosines are not given or are the default ones, this option will give the same results as using the -start options. Otherwise, the coordinate is projected parallel to the axes to determine the appropriate start values.

Frame time and length specification

Specify the start of each time frame. The number of values given must be equal to the length of the time dimension specified on the command line. All of the values given must be in one argument (no spaces between them, or the string must be quoted). Separation by spaces instead of commas is permitted.
Specify the length of each time frame. The comments for -frame_times apply here as well.

To set the start and step values for a functional file with a constant frame times, use the -dattribute flag described below as follows:


-dattribute time:step=1 -dattribute time:start=0

Imaging modality

Do not store modality type in file (default).
PET data.
MRI data.
SPECT data.
Data from a gamma camera.
MR spectroscopy data.
MR angiography data.
CT data.
DSA data
Digital radiography data.

Attribute specification

Specify that variable should be created with string attribute set to value. The complete specification, including variable, attribute and value, should be contained in only one argument to the program - quoting may be needed for strings containing blanks.
Like -sattribute, but for specifying double-precision attribute values.
Like -sattribute or -dattribute, except that the type is chosen by first trying to interpret the value as double precision - if that fails, then the value is assumed to be a string.

Generic options

Print summary of command-line options and exit.
Print the program's version number and exit.

AUTHOR

Peter Neelin

COPYRIGHTS

Copyright © 1993 by Peter Neelin

$Date: 2005-02-09 19:27:18 $