Scroll to navigation

NETSCRIPT(8) System Manager's Manual NETSCRIPT(8)

NAME

netscript - netscript network configuration command

SYNOPSIS

netscript start|stop|reload|restart
netscript ifup|ifdown|ifqos|ifreload <interface-name>|all
netscript ipfilter load|clear|fairq|flush|reload|save
netscript ipfilter usebackup [ backup-number ]
netscript ipfilter exec <function-name1>|<function-name2> [chain p1 p2 ...]
netscript ip6filter load|clear|fairq|flush|reload|save
netscript ip6filter usebackup [ backup-number ]
netscript ip6filter exec <function-name1>|<function-name2> [chain p1 p2 ...]

DESCRIPTION

This manual page documents briefly the netscript command from the netscript router/firewall network configuration package.

This command is used to configure/reconfigure the interface configuration, ipchains filter setup, and ip route service ( QoS ) setup that are configured in netscript's configuration files. It can manipulate individual interfaces, and reconfigure the iptables filter contents and firewall setup, or reconfigure the QoS setup.

It is rather incomplete as it does not describe fully the finely tuned manipulations that happen due to netscript's design which enables a Linux box to serve as a high availability heavy-duty mission-critcial network router or firewall.

IPTABLES CONFIGURATION

Configuration saving is done by iptables-save(8) and iptables-restore(8).

OPTIONS

Set up networking configuration by loading iptables filters, setting up bridge, configuring interfaces and running any configured lower layer protocol daemons or commands. For use from a startup script.
Shut everything down. For use from a startup script.
Refresh the setup of netscript (except for kernel modules) from the configuration files in /etc/netscript
Stop everything and then start everything again. For use from a startup script.
Bring interfaces(s) up by starting any protocol daemons, and configuring interfaces.
Shutdown said interface(s) by doing reverse of ifdown.
Reload QoS configuration for interface(s).
Refresh the interface setup and implement any configuration changes.
Shutdown and then restart interface(s), reloading configuration from lower layer up to the network layer.
Load/reload the IPv4 iptables filters and reconfigure the firewalling, from that saved in /etc/netscript/iptables (via iptables-restore(8) ), and the QoS fair queuing setup.
Save the IPv4 iptables configuration to /etc/netscript/iptables via iptables-save(8) , after backing it up to /etc/netscript/iptables.1 and cycling the previous backup files down through the configuration history.
Restore setup from the IPv4 iptables backup configuration from /etc/netscript/iptables.n ( default 1 ) via iptables-restore(8).
Remove iptables and any firewall setup, and if IPV4_FWDING_KERNEL is set to FILTER_ON (see network.conf(5) ), disables all IPv4 packet forwarding on the router. Very useful for debugging protocol problems on a firewall by enabling a reasonably safe check to be made with the filtering down.
Turns on the IPv4 kernel forwarding switch manually. This is irrespective of the setting of IPV4_FWDING_KERNEL (see network.conf(5) ). Use with caution as it will allow traffic through the box.
Turns off the IPv4 kernel forwarding switch manually. This is irrespective of the setting of IPV4_FWDING_KERNEL (see network.conf(5) ). Use with caution as it will cut off reachability.
Reload the IPv4 fairq chain that marks the packets for the QoS interface transmit queues.
Load/reload the IPv6 iptables filters and reconfigure the firewalling, from that saved in /etc/netscript/ip6tables
(via ip6tables-restore(8) ), and the QoS fair queuing setup.
Save the IPv6 iptables configuration to /etc/netscript/iptables via ip6tables-save(8) , after backing it up to /etc/netscript/ip6tables.1 and cycling the previous backup files down through the configuration history.
Restore setup from the IPv6 iptables backup configuration from /etc/netscript/ip6tables.n ( default 1 ) via ip6tables-restore(8).
Remove IPv6 iptables setup, and if IPV6_FWDING_KERNEL is set to FILTER_ON (see network.conf(5) ), disables all IPv6 packet forwarding on the router. Very useful for debugging protocol problems on a firewall by enabling a reasonably safe check to be made with the filtering down.
Turns on the IPv6 kernel forwarding switch manually. This is irrespective of the setting of IPV6_FWDING_KERNEL (see network.conf(5) ). Use with caution as it will allow traffic through the box.
Turns off the IPv6 kernel forwarding switch manually. This is irrespective of the setting of IPV6_FWDING_KERNEL (see network.conf(5) ). Use with caution as it will affect reachability.
Reload the IPv6 fairq chain that marks the packets for the QoS interface transmit queues.

FILES

/etc/netscript/if.conf, /etc/netscript/ipfilter.conf,
/etc/netscript/network.conf, /etc/netscript/qos.conf,
/etc/netscript/iptables, /etc/netscript/ip6tables,

SEE ALSO

if.conf(5), ipfilter.conf(5), network.conf(5), qos.conf(5), ip(8), tc(8), iptables(8), iptables-restore(8), iptables-save(8), ip6tables(8), ip6tables-restore(8), ip6tables-save(8), brcfg(8).

AUTHOR

This manual page was written by Matthew Grant <matt@mattgrant.net.nz>, for the Debian GNU/Linux system (but may be used by others).

BUGS

I wrote this manpage when I was half asleep...

January 9, 2014