table of contents
NFREPLAY(1) | General Commands Manual | NFREPLAY(1) |
NAME¶
nfreplay
— replay
binary flow files as netflow version v5 or v9 to a remote host
SYNOPSIS¶
nfreplay |
-r flowfile
-H remotehost
-p port
[-S Sourceaddr]
[-j mcastgroup]
[-4 ] [-6 ]
[-v version]
[-d usec]
[-b buffsize]
[-z num]
[-c num]
[-v ] [-H ]
[filter] |
DESCRIPTION¶
nfreplay
reads binary flow files stored by
any nfdump collector and sents the flow records to a remote host or a
multicast group.
nfreplay
sends the data as netflow v5 or
v9 to the remote location.
nfreplay
accepts a filter to limit the
flows to be sent. The filter syntax is equivalent to nfdump.
The options are as follows:
-r
flowfile- Read input data from flowfile.
-H
remotehost- Send all flows to this remote host. Accepts a symbolic name or a IPv4/IPv6 IP address.
-j
mcastgroup- Join this multicast group and send all flows to this group host. Accepts a symbolic name or multicast IPv4/IPv6 IP address.
-p
port- Send all flows to this port on the remote side. Default is 9995.
-S
Sourceaddr- Use the specified source IP address to send the flows
-4
- Forces
nfreplay
to send flows to a IPv4 address only. Can be used if the remote host has an IPv4 and IPv6 address record. -6
- Forces
nfreplay
to send flows to a IPv6 address only. Can be used if the remote host has an IPv4 and IPv6 address record. -v
version- Send flows as netflow version version. Version V5 and v9 are supported. In v5 mode, all additional elements to a stadard v5 record are skipped and 64bit counters are truncated to 32bit. The default is v9.
-u
usec- Delay each record by usec mirco seconds, to avoid overrun on the remote host. Default is 10usec.
-B
buffsize- Set send buffer to buffsize size in bytes. Useful to buffer larger data transfers.
-z
num- Flows are sent with their "real distribution" acrross time (with
a speed coefficient)
-z
1 : 5 minutes of records will be sent in 5 minutes.-
z 20 : 5 minutes of record will be sent in 5/20 = 0.25 minutes.
-c
num- Limit number of records to send to the first num flows.
-V
- Print
nfreplay
version and exit. -h
- Print help text on stdout with all options and exit.
RETURN VALUES¶
nfreplay
returns
- 255 Initialization failed.
- 254 Error in filter syntax.
- 250 Internal error.
SEE ALSO¶
October 21, 2024 | Debian |