Scroll to navigation

NVME-FDP-FEATURE(1) NVMe Manual NVME-FDP-FEATURE(1)

NAME

nvme-fdp-feature - Show or change Flexible Data Placement (FDP) Feature

SYNOPSIS

nvme fdp <device> [--endgrp-id=<NUM> | -e <NUM>]


                [--enable-conf-idx=<NUM> | -c <NUM>]


                [--disable | -d]


                [--verbose | -v]

DESCRIPTION

For the NVMe device given, configure and manage the Flexible Data Placement (FDP) feature.

This command can be used to either show the current FDP feature configuration or change it.



 If no `--enable-conf-idx` or `--disable` options are provided, the current configuration is
displayed.

If the --enable-conf-idx or --disable options are provided, configuration is changed accordingly. Device may refuse the change if there is a namespace.

The <device> parameter is mandatory and must be a NVMe character device (ex: /dev/nvme0)

OPTIONS

-e <NUM>, --endgrp-id=<NUM>

Specify the endurance group ID. This option is mandatory if device supports endurance groups.

-c <NUM>, --enable-conf-idx=<NUM>

Enable FDP feature with the specified configuration. The configuration index matches position listed by nvme-fdp-config(1).

-d, --disable

Disable the current FDP feature configuration.

-v, --verbose

Increase verbosity of the output.

SEE ALSO

nvme-list-endgrp(1) nvme-fdp-config(1)

NVME

Part of nvme-cli

03/24/2025 NVMe