Scroll to navigation

PDNSUTIL(1) PowerDNS Authoritative Server PDNSUTIL(1)

NAME

pdnsutil - PowerDNS record and DNSSEC command and control

SYNOPSIS

pdnsutil [OPTION]... COMMAND

DESCRIPTION

pdnsutil (formerly pdnssec) is a powerful command that is the operator-friendly gateway into DNSSEC and zone management for PowerDNS. Behind the scenes, pdnsutil manipulates a PowerDNS backend database, which also means that for many databases, pdnsutil can be run remotely, and can configure key material on different servers.

OPTIONS

Show summary of options
Be more verbose.
Force an action
Virtual configuration name
Location of pdns.conf. Default is /etc/powerdns.

COMMANDS

There are many available commands, this section splits them up into their respective uses

DNSSEC RELATED COMMANDS

Several commands manipulate the DNSSEC keys and options for zones. Some of these commands require an ALGORITHM to be set. The following algorithms are supported:

  • rsasha1
  • rsasha1-nsec3-sha1
  • rsasha256
  • rsasha512
  • ecdsa256
  • ecdsa384
  • ed25519
  • ed448

Activate a key with id KEY-ID within a zone called ZONE.
Create a new key for zone ZONE, and make it a KSK or a ZSK (default), with the specified algorithm. The key is inactive by default, set it to active to immediately use it to sign ZONE. The key is published in the zone by default, set it to unpublished to keep it from being returned in a DNSKEY query, which is useful for algorithm rollovers. Prints the id of the added key.
Create DNSSEC database (sqlite3) at FILE for the BIND backend. Remember to set bind-dnssec-db=*FILE* in your pdns.conf.
Deactivate a key with id KEY-ID within a zone called ZONE.
Deactivate all keys and unset PRESIGNED in ZONE.
Export to standard output DNSKEY and DS of key with key id KEY-ID within zone called ZONE.
Export to standard output all KSK DS records for ZONE.
Export to standard output full (private) key with key id KEY-ID within zone called ZONE. The format used is compatible with BIND and NSD/LDNS.
Export to standard output full (private) key with key id KEY-ID within zone called ZONE in the PEM file format. The format is compatible with many non-DNS software products.
Generate a ZSK or KSK to stdout with specified algorithm and bits and print it on STDOUT. If ALGORITHM is not set, ECDSA256 is used. If KEYBITS is not set, an appropriate keysize is selected for ALGORITHM. Each ECC-based algorithm supports only one valid KEYBITS value: For ECDSA256 and ED25519, it is 256; for ECDSA384, it is 384; and for ED448, it is 456.
Import from FILE a full (private) key for the zone called ZONE. The format used is compatible with BIND and NSD/LDNS. KSK or ZSK specifies the flags this key should have on import. Prints the id of the added key.
Import from PEM FILE a full (private) key for the zone called ZONE with a specified ALGORITHM. The format used is compatible with many non-DNS software products. KSK or ZSK specifies the flags this key should have on import. Prints the id of the added key.
Publish the key with id KEY-ID within a zone called ZONE.
Remove a key with id KEY-ID from a zone called ZONE.
Sets NSEC3 parameters for this zone. The quoted parameters are 4 values that are used for the NSEC3PARAM record and decide how NSEC3 records are created. The NSEC3 parameters must be quoted on the command line. HASH-ALGORITHM must be 1 (SHA-1). Setting FLAGS to 1 enables NSEC3 opt-out operation. Only do this if you know you need it. For ITERATIONS, please consult RFC 5155, section 10.3. And be aware that a high number might overload validating resolvers and that a limit can be set with max-nsec3-iterations in pdns.conf. The SALT is a hexadecimal string encoding the bits for the salt, or - to use no salt. Setting narrow will make PowerDNS send out "white lies" (RFC 7129) about the next secure record to prevent zone enumeration. Instead of looking it up in the database, it will send out the hash + 1 as the next secure record. Narrow mode requires online signing capabilities by the nameserver and therefore zone transfers are denied. If only the zone is provided as argument, the 4-parameter quoted string defaults to '1 0 0 -'. A sample commandline is: pdnsutil set-nsec3 powerdnssec.org '1 1 1 ab' narrow. WARNING: If running in RSASHA1 mode (algorithm 5 or 7), switching from NSEC to NSEC3 will require a DS update in the parent zone.
Unpublish the key with id KEY-ID within a zone called ZONE.
Converts ZONE to NSEC operations. WARNING: If running in RSASHA1 mode (algorithm 5 or 7), switching from NSEC to NSEC3 will require a DS update at the parent zone!
Set ZONE to respond to queries for its CDS records. the optional argument DIGESTALGOS should be a comma-separated list of DS algorithms to use. By default, this is 2 (SHA-256). 0 will publish a CDS with a DNSSEC delete algorithm.
Set ZONE to publish CDNSKEY records. Add 'delete' to publish a CDNSKEY with a DNSSEC delete algorithm.
Set ZONE to stop responding to queries for its CDS records.
Set ZONE to stop publishing CDNSKEY records.

TSIG RELATED COMMANDS

These commands manipulate TSIG key information in the database. Some commands require an ALGORITHM, the following are available:

  • hmac-md5
  • hmac-sha1
  • hmac-sha224
  • hmac-sha256
  • hmac-sha384
  • hmac-sha512

Enable TSIG authenticated AXFR using the key NAME for zone ZONE. This sets the TSIG-ALLOW-AXFR (primary/producer) or AXFR-MASTER-TSIG (secondary/consumer) zone metadata.
Disable TSIG authenticated AXFR using the key NAME for zone ZONE.
Delete the TSIG key NAME. Warning, this does not deactivate said key.
Generate new TSIG key with name NAME and the specified algorithm.
Import KEY of the specified algorithm as NAME.
Show a list of all configured TSIG keys.

ZONE MANIPULATION COMMANDS

Add one or more records of NAME and TYPE to ZONE with CONTENT and optional TTL. If TTL is not set, default will be used.
Add a autoprimary entry into the backend. This enables receiving zone updates from other servers.
Remove an autoprimary from backend. Not supported by BIND backend.
List all autoprimaries.
Create an empty zone named ZONE.
Create a new secondary zone ZONE with primaries PRIMARY. All PRIMARYs need to to be space-separated IP addresses with an optional port.
Change the primaries for secondary zone ZONE to new primaries PRIMARY. All PRIMARYs need to to be space-separated IP addresses with an optional port.
Check all zones for correctness.
Check zone ZONE for correctness.
Clear the records in zone ZONE, but leave actual zone and settings unchanged
Delete named RRSET from zone.
Delete the zone named ZONE.
Opens ZONE in zonefile format (regardless of backend it was loaded from) in the editor set in the environment variable EDITOR. if EDITOR is empty, pdnsutil falls back to using editor.
Get zone metadata. If no ATTRIBUTE given, lists all known.
This convenience command asks for a password and returns a hashed and salted version, for use as a webserver password or api key. An optional scrypt work factor can be specified, in power of two, otherwise it defaults to 1024.
This convenience command hashes the name RNAME according to the NSEC3 settings of ZONE. Refuses to hash for zones with no NSEC3 settings.
Increases the SOA-serial by 1. Uses SOA-EDIT.
List DNSSEC information for all keys or for ZONE. --verbose or -v will also include the keys for disabled or empty zones.
List all active zone names. --verbose or -v will also include disabled or empty zones.
List all members of catalog zone CATALOG"
Show all records for ZONE.
Load records for ZONE from FILE. If ZONE already exists, all records are overwritten, this operation is atomic. If ZONE doesn't exist, it is created.
Calculates the 'ordername' and 'auth' fields for a zone called ZONE so they comply with DNSSEC settings. Can be used to fix up migrated data. Can always safely be run, it does no harm.
Calculates the 'ordername' and 'auth' fields for all zones so they comply with DNSSEC settings. Can be used to fix up migrated data. Can always safely be run, it does no harm.
Replace existing NAME in zone ZONE with a new set.
Configures a zone called ZONE with reasonable DNSSEC settings. You should manually run 'pdnsutil rectify-zone' afterwards.
Configures all zones that are not currently signed with reasonable DNSSEC settings. Setting increase-serial will increase the serial of those zones too. You should manually run 'pdnsutil rectify-all-zones' afterwards.
Change the kind of ZONE to KIND (primary, secondary, native, producer, consumer).
Change the options of ZONE to JSON
Set or remove an option for ZONE. Providing an empty value removes an option.
Change the catalog of ZONE to CATALOG. Setting CATALOG to an empty "" removes ZONE from the catalog it is in.
Change the account (owner) of ZONE to ACCOUNT.
Append VALUE to the existing ATTRIBUTE metadata for ZONE. Will return an error if ATTRIBUTE does not support multiple values, use set-meta for these values.
Set zonemetadata ATTRIBUTE for ZONE to VALUE. An empty value clears it.
Switches ZONE to presigned operation, utilizing in-zone RRSIGs.
Shows all DNSSEC related settings of a zone called ZONE.
Test database schema, this creates the zone ZONE
Disables presigned operation for ZONE.
Display record contents in a form suitable for dnsdist's SpoofRawAction.
Validate ZONEMD for ZONE read from FILE.

DEBUGGING TOOLS

Send a text command to a backend for execution. GSQL backends will take SQL commands, other backends may take different things. Be careful!
Perform a benchmark of the backend-database. FILE can be a file with a list, one per line, of zone names to use for this. If FILE is not specified, powerdns.com is used.

OTHER TOOLS

Migrate data from one backend to another. Needs launch=OLD,NEW in the configuration.
Encrypt an IP address according to the 'ipcipher' standard
Decrypt an IP address according to the 'ipcipher' standard

SEE ALSO

pdns_server (1), pdns_control (1)

AUTHOR

PowerDNS.COM BV

COPYRIGHT

PowerDNS.COM BV

September 30, 2024