table of contents
| PG_RESETWAL(1) | PostgreSQL 17.0 Documentation | PG_RESETWAL(1) |
NAME¶
pg_resetwal - reset the write-ahead log and other control information of a PostgreSQL database cluster
SYNOPSIS¶
pg_resetwal [-f | --force] [-n | --dry-run] [option...] [-D | --pgdata]datadir
DESCRIPTION¶
pg_resetwal clears the write-ahead log (WAL) and optionally resets some other control information stored in the pg_control file. This function is sometimes needed if these files have become corrupted. It should be used only as a last resort, when the server will not start due to such corruption.
Some options, such as --wal-segsize (see below), can also be used to modify certain global settings of a database cluster without the need to rerun initdb. This can be done safely on an otherwise sound database cluster, if none of the dangerous modes mentioned below are used.
If pg_resetwal is used on a data directory where the server has been cleanly shut down and the control file is sound, then it will have no effect on the contents of the database system, except that no longer used WAL files are cleared away. Any other use is potentially dangerous and must be done with great care. pg_resetwal will require the -f (force) option to be specified before working on a data directory in an unclean shutdown state or with a corrupted control file.
After running this command on a data directory with corrupted WAL or a corrupted control file, it should be possible to start the server, but bear in mind that the database might contain inconsistent data due to partially-committed transactions. You should immediately dump your data, run initdb, and restore. After restore, check for inconsistencies and repair as needed.
If pg_resetwal complains that it cannot determine valid data for pg_control, you can force it to proceed anyway by specifying the -f (force) option. In this case plausible values will be substituted for the missing data. Most of the fields can be expected to match, but manual assistance might be needed for the next OID, next transaction ID and epoch, next multitransaction ID and offset, and WAL starting location fields. These fields can be set using the options discussed below. If you are not able to determine correct values for all these fields, -f can still be used, but the recovered database must be treated with even more suspicion than usual: an immediate dump and restore is imperative. Do not execute any data-modifying operations in the database before you dump, as any such action is likely to make the corruption worse.
This utility can only be run by the user who installed the server, because it requires read/write access to the data directory.
OPTIONS¶
datadir
-D datadir
--pgdata=datadir
-f
--force
-n
--dry-run
-V
--version
-?
--help
The following options are only needed when pg_resetwal is unable to determine appropriate values by reading pg_control. Safe values can be determined as described below. For values that take numeric arguments, hexadecimal values can be specified by using the prefix 0x. Note that these instructions only apply with the standard block size of 8 kB.
-c xid,xid
--commit-timestamp-ids=xid,xid
A safe value for the oldest transaction ID for which the commit time can be retrieved (first part) can be determined by looking for the numerically smallest file name in the directory pg_commit_ts under the data directory. Conversely, a safe value for the newest transaction ID for which the commit time can be retrieved (second part) can be determined by looking for the numerically greatest file name in the same directory. The file names are in hexadecimal.
-e xid_epoch
--epoch=xid_epoch
The transaction ID epoch is not actually stored anywhere in the database except in the field that is set by pg_resetwal, so any value will work so far as the database itself is concerned. You might need to adjust this value to ensure that replication systems such as Slony-I and Skytools work correctly — if so, an appropriate value should be obtainable from the state of the downstream replicated database.
-l walfile
--next-wal-file=walfile
The name of next WAL segment file should be larger than any WAL segment file name currently existing in the directory pg_wal under the data directory. These names are also in hexadecimal and have three parts. The first part is the “timeline ID” and should usually be kept the same. For example, if 00000001000000320000004A is the largest entry in pg_wal, use -l 00000001000000320000004B or higher.
Note that when using nondefault WAL segment sizes, the numbers in the WAL file names are different from the LSNs that are reported by system functions and system views. This option takes a WAL file name, not an LSN.
Note
pg_resetwal itself looks at the files in pg_wal and chooses a default -l setting beyond the last existing file name. Therefore, manual adjustment of -l should only be needed if you are aware of WAL segment files that are not currently present in pg_wal, such as entries in an offline archive; or if the contents of pg_wal have been lost entirely.
-m mxid,mxid
--multixact-ids=mxid,mxid
A safe value for the next multitransaction ID (first part) can be determined by looking for the numerically largest file name in the directory pg_multixact/offsets under the data directory, adding one, and then multiplying by 65536 (0x10000). Conversely, a safe value for the oldest multitransaction ID (second part of -m) can be determined by looking for the numerically smallest file name in the same directory and multiplying by 65536. The file names are in hexadecimal, so the easiest way to do this is to specify the option value in hexadecimal and append four zeroes.
-o oid
--next-oid=oid
There is no comparably easy way to determine a next OID that's beyond the largest one in the database, but fortunately it is not critical to get the next-OID setting right.
-O mxoff
--multixact-offset=mxoff
A safe value can be determined by looking for the numerically largest file name in the directory pg_multixact/members under the data directory, adding one, and then multiplying by 52352 (0xCC80). The file names are in hexadecimal. There is no simple recipe such as the ones for other options of appending zeroes.
--wal-segsize=wal_segment_size
This option can also be used to change the WAL segment size of an existing database cluster, avoiding the need to re-initdb.
Note
While pg_resetwal will set the WAL starting address beyond the latest existing WAL segment file, some segment size changes can cause previous WAL file names to be reused. It is recommended to use -l together with this option to manually set the WAL starting address if WAL file name overlap will cause problems with your archiving strategy.
-u xid
--oldest-transaction-id=xid
A safe value can be determined by looking for the numerically smallest file name in the directory pg_xact under the data directory and then multiplying by 1048576 (0x100000). Note that the file names are in hexadecimal. It is usually easiest to specify the option value in hexadecimal too. For example, if 0007 is the smallest entry in pg_xact, -u 0x700000 will work (five trailing zeroes provide the proper multiplier).
-x xid
--next-transaction-id=xid
A safe value can be determined by looking for the numerically largest file name in the directory pg_xact under the data directory, adding one, and then multiplying by 1048576 (0x100000). Note that the file names are in hexadecimal. It is usually easiest to specify the option value in hexadecimal too. For example, if 0011 is the largest entry in pg_xact, -x 0x1200000 will work (five trailing zeroes provide the proper multiplier).
ENVIRONMENT¶
PG_COLOR
NOTES¶
This command must not be used when the server is running. pg_resetwal will refuse to start up if it finds a server lock file in the data directory. If the server crashed then a lock file might have been left behind; in that case you can remove the lock file to allow pg_resetwal to run. But before you do so, make doubly certain that there is no server process still alive.
pg_resetwal works only with servers of the same major version.
SEE ALSO¶
| 2024 | PostgreSQL 17.0 |