table of contents
- trixie-backports 1.1.0-1~bpo13+1
- testing 1.1.0-1
- unstable 1.1.0-1
| RTL_WMBUS:(1) | User Commands | RTL_WMBUS:(1) |
NAME¶
rtl_wmbus: - software defined receiver for Wireless M-Bus
DESCRIPTION¶
rtl_wmbus: 1.1.0-1
Usage ./build/rtl_wmbus:¶
-o remove DC offset
-a accelerate (use an inaccurate atan version)
-r 0 to disable run length algorithm
-t 0 to disable time2 algorithm
-d 2 set decimation rate to 2 (defaults to 2 if omitted)
-v show used algorithm in the output
-V show version
-s receive S1 and T1/C1 datagrams simultaneously. rtl_sdr _MUST_ be set to 868.625MHz (-f 868.625M)
-p [T,S] to disable processing T1/C1 or S1 mode
-f exit if incoming data stalled for 5 seconds
-h print this help
Usage ./build/rtl_wmbus:¶
-o remove DC offset
-a accelerate (use an inaccurate atan version)
-r 0 to disable run length algorithm
-t 0 to disable time2 algorithm
-d 2 set decimation rate to 2 (defaults to 2 if omitted)
-v show used algorithm in the output
-V show version
-s receive S1 and T1/C1 datagrams simultaneously. rtl_sdr _MUST_ be set to 868.625MHz (-f 868.625M)
-p [T,S] to disable processing T1/C1 or S1 mode
-f exit if incoming data stalled for 5 seconds
-h print this help
| February 2026 | rtl_wmbus: 1.1.0-1 |