table of contents
VISUDO(8) | System Manager's Manual | VISUDO(8) |
NAME¶
visudo
— edit the
sudoers file
SYNOPSIS¶
visudo |
[-chIOPqsV ] [[-f ]
sudoers] |
DESCRIPTION¶
visudo
edits the sudoers
file in a safe fashion, analogous to vipw(8).
visudo
locks the sudoers file
against multiple simultaneous edits, performs basic validity checks, and
checks for syntax errors before installing the edited file. If the
sudoers file is currently being edited you will receive a
message to try again later.
If the sudoers file does not exist, it will be created unless the editor exits without writing to the file.
visudo
parses the
sudoers file after editing and will not save the changes
if there is a syntax error. Upon finding an error,
visudo
will print a message stating the line
number(s) where the error occurred and the user will receive the
“What now?” prompt. At this point the user may enter
‘e
’ to re-edit the
sudoers file, ‘x
’ to
exit without saving the changes, or
‘Q
’ to quit and save changes. The
‘Q
’ option should be used with extreme
caution because if visudo
believes there to be a
syntax error, so will sudo
. If
‘e
’ is typed to edit the
sudoers file after a syntax error has been detected, the
cursor will be placed on the line where the error occurred (if the editor
supports this feature).
There are two sudoers settings that determine
which editor visudo
will run.
- editor
- A colon (‘
:
’) separated list of editors allowed to be used withvisudo
.visudo
will choose the editor that matches the user'sSUDO_EDITOR
,VISUAL
, orEDITOR
environment variable if possible, or the first editor in the list that exists and is executable.sudo
does not preserve theSUDO_EDITOR
,VISUAL
, orEDITOR
environment variables unless they are present in the env_keep list or the env_reset option is disabled in the sudoers file. The default editor path is /usr/bin/editor which can be set at compile time via the--with-editor
configure option. - env_editor
- If set,
visudo
will use the value of theSUDO_EDITOR
,VISUAL
, orEDITOR
environment variables before falling back on the default editor list.visudo
is typically run as root so this option may allow a user withvisudo
privileges to run arbitrary commands as root without logging. An alternative is to place a colon-separated list of “safe” editors in the editor variable.visudo
will then only useSUDO_EDITOR
,VISUAL
, orEDITOR
if they match a value specified in editor. If the env_reset flag is enabled, theSUDO_EDITOR
,VISUAL
, and/orEDITOR
environment variables must be present in the env_keep list for the env_editor flag to function whenvisudo
is invoked viasudo
. The default value is on, which can be set at compile time via the--with-env-editor
configure option.
The options are as follows:
-c
,--check
- Enable check-only mode. The existing
sudoers file (and any other files it includes) will be
checked for syntax errors. If the path to the sudoers
file was not specified,
visudo
will also check the file ownership and permissions (see the-O
and-P
options). A message will be printed to the standard output describing the status of sudoers unless the-q
option was specified. If the check completes successfully,visudo
will exit with a value of 0. If an error is encountered,visudo
will exit with a value of 1. -f
sudoers,--file
=sudoers- Specify an alternate sudoers file location, see below.
As of version 1.8.27, the sudoers path can be specified
without using the
-f
option. -h
,--help
- Display a short help message to the standard output and exit.
-I
,--no-includes
- Disable the editing of include files unless there is a pre-existing syntax
error. By default,
visudo
will edit the main sudoers file and any files included via @include or #include directives. Files included via @includedir or #includedir are never edited unless they contain a syntax error. -O
,--owner
- Enforce the default ownership (user and group) of the
sudoers file. In edit mode, the owner of the edited file
will be set to the default. In check mode (
-c
), an error will be reported if the owner is incorrect. This option is enabled by default if the sudoers file was not specified. -P
,--perms
- Enforce the default permissions (mode) of the sudoers
file. In edit mode, the permissions of the edited file will be set to the
default. In check mode (
-c
), an error will be reported if the file permissions are incorrect. This option is enabled by default if the sudoers file was not specified. -q
,--quiet
- Enable
quiet
mode. In this mode details about syntax errors are not printed. This
option is only useful when combined with the
-c
option. -s
,--strict
- Enable
strict
checking of the sudoers file. If an alias is referenced
but not actually defined or if there is a cycle in an alias,
visudo
will consider this a syntax error. It is not possible to differentiate between an alias and a host name or user name that consists solely of uppercase letters, digits, and the underscore (‘_
’) character. -V
,--version
- Print the
visudo
and sudoers grammar versions and exit.
A sudoers file may be specified instead of the
default, /etc/sudoers. The temporary file used is
the specified sudoers file with “.tmp”
appended to it. In check-only mode only,
‘-
’ may be used to indicate that
sudoers will be read from the standard input. Because the
policy is evaluated in its entirety, it is not sufficient to check an
individual sudoers include file for syntax errors.
Debugging and sudoers plugin arguments¶
visudo
versions 1.8.4 and higher support a
flexible debugging framework that is configured via
Debug
lines in the sudo.conf(5) file.
Starting with sudo
1.8.12,
visudo
will also parse the arguments to the
sudoers plugin to override the default
sudoers path name, user-ID, group-ID, and file mode. These
arguments, if present, should be listed after the path to the plugin (i.e.,
after sudoers.so). Multiple arguments may be
specified, separated by white space. For example:
Plugin sudoers_policy sudoers.so sudoers_mode=0400
The following arguments are supported:
- sudoers_file=pathname
- The sudoers_file argument can be used to override the default path to the sudoers file.
- sudoers_uid=user-ID
- The sudoers_uid argument can be used to override the default owner of the sudoers file. It should be specified as a numeric user-ID.
- sudoers_gid=group-ID
- The sudoers_gid argument can be used to override the default group of the sudoers file. It must be specified as a numeric group-ID (not a group name).
- sudoers_mode=mode
- The sudoers_mode argument can be used to override the default file mode for the sudoers file. It should be specified as an octal value.
For more information on configuring sudo.conf(5), refer to its manual.
ENVIRONMENT¶
The following environment variables may be consulted depending on the value of the editor and env_editor sudoers settings:
SUDO_EDITOR
- Invoked by
visudo
as the editor to use VISUAL
- Used by
visudo
ifSUDO_EDITOR
is not set EDITOR
- Used by
visudo
if neitherSUDO_EDITOR
norVISUAL
is set
FILES¶
- /etc/sudo.conf
- Sudo front-end configuration
- /etc/sudoers
- List of who can run what
- /etc/sudoers.tmp
- Default temporary file used by visudo
DIAGNOSTICS¶
In addition to reporting sudoers syntax errors,
visudo
may produce the following messages:
sudoers file busy, try again later.
- Someone else is currently editing the sudoers file.
/etc/sudoers: Permission denied
- You didn't run
visudo
as root. you do not exist in the passwd database
- Your user-ID does not appear in the system passwd database.
Warning: {User,Runas,Host,Cmnd}_Alias referenced but not defined
- Either you are trying to use an undeclared {User,Runas,Host,Cmnd}_Alias or
you have a user or host name listed that consists solely of uppercase
letters, digits, and the underscore
(‘
_
’) character. In the latter case, you can ignore the warnings (sudo
will not complain). The message is prefixed with the path name of the sudoers file and the line number where the undefined alias was used. In-s
(strict) mode these are errors, not warnings. Warning: unused {User,Runas,Host,Cmnd}_Alias
- The specified {User,Runas,Host,Cmnd}_Alias was defined but never used. The message is prefixed with the path name of the sudoers file and the line number where the unused alias was defined. You may wish to comment out or remove the unused alias.
Warning: cycle in {User,Runas,Host,Cmnd}_Alias
- The specified {User,Runas,Host,Cmnd}_Alias includes a reference to itself,
either directly or through an alias it includes. The message is prefixed
with the path name of the sudoers file and the line
number where the cycle was detected. This is only a warning unless
visudo
is run in-s
(strict) mode assudo
will ignore cycles when parsing the sudoers file. ignoring editor backup file
- While processing a @includedir or
#includedir, a file was found with a name that ends in
‘
~
’ or .bak. Such files are skipped bysudo
andvisudo
. ignoring file name containing '.'
- While processing a @includedir or
#includedir, a file was found with a name that contains
a ‘
.
’ character. Such files are skipped bysudo
andvisudo
. unknown defaults entry "name"
- The sudoers file contains a
Defaults
setting not recognized by
visudo
.
SEE ALSO¶
AUTHORS¶
Many people have worked on sudo
over the
years; this version consists of code written primarily by:
See the CONTRIBUTORS.md file in the sudo
distribution (https://www.sudo.ws/about/contributors/) for an exhaustive
list of people who have contributed to sudo
.
CAVEATS¶
There is no easy way to prevent a user from gaining a root shell
if the editor used by visudo
allows shell
escapes.
BUGS¶
If you believe you have found a bug in
visudo
, you can submit a bug report at
https://bugzilla.sudo.ws/
SUPPORT¶
Limited free support is available via the sudo-users mailing list, see https://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search the archives.
DISCLAIMER¶
visudo
is provided “AS IS”
and any express or implied warranties, including, but not limited to, the
implied warranties of merchantability and fitness for a particular purpose
are disclaimed. See the LICENSE.md file distributed with
sudo
or https://www.sudo.ws/about/license/ for
complete details.
July 27, 2023 | Sudo 1.9.15p5 |