table of contents
| CX(4) | Device Drivers Manual (i386) | CX(4) |
NAME¶
cx — driver for
synchronous/asynchronous Cronyx Sigma WAN adapters
SYNOPSIS¶
To compile this driver into the kernel, place the following line in your kernel configuration file:
device cxAlternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_cx_load="YES"
Additional options:
device sppp
options NETGRAPH
options NETGRAPH_CRONYX
In /boot/device.hints:
hint.cx.0.at="isa"
hint.cx.0.port="0x240"
hint.cx.0.irq="15"
hint.cx.0.drq="7"
DEPRECATION NOTICE¶
The cx driver is not present in
FreeBSD 13.0 and later.
DESCRIPTION¶
The cx driver needs either
sppp(4) or netgraph(4). Which one to use
is determined by the NETGRAPH_CRONYX option. If this
option is present in your kernel configuration file, the
cx driver will be compiled with
netgraph(4) support. Otherwise, it will be compiled with
sppp(4) support.
The base I/O port address specified in /boot/device.hints must match the port address set by the jumpers on the board. The DMA I/O channel and interrupt request numbers are configured by software at adapter initialization. Legal values are:
- Port:
- 0x240, 0x260, 0x280, 0x300, 0x320, 0x380
- IRQ:
- 3, 5, 7, 10, 11, 12, 15
- DMA:
- 5, 6, 7
The cx driver supports autodetection. As
for all non-PNP hardware, using autodetection could lead to some potential
problems with other devices during the hardware detection process. It is
always better to specify hardware resources manually.
Refer to sconfig(8) for information about the
cx adapter configuration.
HARDWARE¶
The cx driver supports the following
cards:
- Cronyx Sigma-22, Sigma-24
- Cronyx Sigma-100
- Cronyx Sigma-400, Sigma-401, Sigma-404, Sigma-410, Sigma-440
- Cronyx Sigma-500
- Cronyx Sigma-703
- Cronyx Sigma-800, Sigma-801, Sigma-810, Sigma-840
SEE ALSO¶
cp(4), ctau(4), sppp(4), ifconfig(8), sconfig(8), spppcontrol(8)
HISTORY¶
The cx driver was updated in
FreeBSD 5.2 and FreeBSD
4.10. In most of the previous versions of
FreeBSD the cx driver is out
of date. The cx driver for previous versions of
FreeBSD is available from
http://www.cronyx.ru/.
| March 2, 2020 | Debian |