table of contents
READ(1) | User Commands | READ(1) |
NAME¶
Read - Read Target Test Chart.
DESCRIPTION¶
Read Target Test Chart
SYNOPSIS¶
chartread [-options] outfile
- ** No ports found **
- -t
- Use transmission measurement mode
- -d
- Use display measurement mode (white Y relative results)
- -e
- Emissive for transparency on a light box
- -p
- Measure patch by patch rather than strip
- -x [lx]
- Take external values, either L*a*b* (-xl) or XYZ (-xx).
- -n
- Don't save spectral information (default saves spectral)
- -l
- Save CIE as D50 L*a*b* rather than XYZ
- -L
- Save CIE as D50 L*a*b* as well as XYZ
- -r
- Resume reading partly read chart
- -I file.cal
- Override calibration info from .ti2 in resulting .ti3
- -F filter
- Set filter configuration (if aplicable):
- n
- None
- p
- Polarising filter
- 6
- D65
- u
- U.V. Cut
- -N
- Disable initial calibration of instrument if possible
- -B
- Disable auto bi-directional strip recognition
- -H
- Use high resolution spectrum mode (if available)
- -X file.ccmx
- Apply Colorimeter Correction Matrix
- -X file.ccss
- Use Colorimeter Calibration Spectral Samples for calibration
- -Q observ
- Choose CIE Observer for CCSS instrument: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2
- -T ratio
- Modify strip patch consistency tolerance by ratio
- -S
- Suppress wrong strip & unexpected value warnings
- -W n|h|x
- Override serial port flow control: n = none, h = HW, x = Xon/Xoff
- -D [level]
- Print debug diagnostics to stderr
- outfile
- Base name for input[ti2]/output[ti3] file
September 2014 | chartread |