Scroll to navigation

FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8)

NAME

fence_ipmilanplus - Fence agent for IPMI

fence_ilo3 - Fence agent for HP iLO3 (symlink)

fence_ilo4 - Fence agent for HP iLO4 (symlink)

fence_ilo5 - Fence agent for HP iLO5 (symlink)

fence_ipmilanplus - Fence agent for IPMIv2 lanplus (symlink)

fence_imm - Fence agent for IBM Integrated Management Module (symlink)

fence_idrac - Fence agent for Dell iDRAC (symlink)

DESCRIPTION

fence_ipmilan is an I/O Fencing agentwhich can be used with machines controlled by IPMI.This agent calls support software ipmitool (http://ipmitool.sf.net/). WARNING! This fence agent might report success before the node is powered off. You should use -m/method onoff if your fence device works correctly with that option.

fence_ipmilanplus accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ipmilanplus can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts.

Vendor URL:

PARAMETERS

Fencing action (Default Value: reboot)
IPMI Lan Auth type. (md5|password|none)
Ciphersuite to use (same as ipmitool -C parameter)
Hexadecimal-encoded Kg key for IPMIv2 authentication
IP address or hostname of fencing device
TCP/UDP port to use for connection with device (Default Value: 623)
Use Lanplus to improve security of connection (Default Value: 1)
Method to fence (onoff|cycle) (Default Value: onoff)
Login password or passphrase
Script to run to retrieve password
IP address or hostname of fencing device (together with --port-as-ip)
Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator)
Bridge IPMI requests to the remote target address
Login name
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
Write debug information to given file
Display version information and exit
Display help and exit
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
Wait X seconds before fencing is started (Default Value: 0)
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
Wait X seconds for cmd prompt after login (Default Value: 5)
Make "port/plug" to be an alias to IP address
Test X seconds for status change after ON/OFF (Default Value: 20)
Wait X seconds after issuing ON/OFF (Default Value: 2)
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
Timeout (sec) for IPMI operation (Default Value: 2)
Count of attempts to retry power on (Default Value: 1)
Use sudo (without password) when calling 3rd party software
Path to sudo binary (Default Value: /usr/bin/sudo)

ACTIONS

Power on machine.
Power off machine.
Reboot machine.
This returns the status of the plug/virtual machine.
Check the health of fence device
Display the XML metadata describing this resource.

The operational behavior of this is not known.
Validate if all required parameters are entered.
Pulse a diagnostic interrupt to the processor(s).

STDIN PARAMETERS

Fencing action (Default Value: reboot)
IPMI Lan Auth type. (md5|password|none)
Ciphersuite to use (same as ipmitool -C parameter)
Hexadecimal-encoded Kg key for IPMIv2 authentication
IP address or hostname of fencing device Obsoletes: ipaddr
TCP/UDP port to use for connection with device (Default Value: 623)
Use Lanplus to improve security of connection (Default Value: 1)
Method to fence (onoff|cycle) (Default Value: onoff)
Login password or passphrase Obsoletes: passwd
Script to run to retrieve password Obsoletes: passwd_script
IP address or hostname of fencing device (together with --port-as-ip) Obsoletes: port
Privilege level on IPMI device (callback|user|operator|administrator) (Default Value: administrator)
Bridge IPMI requests to the remote target address
Login name Obsoletes: login
Disable logging to stderr. Does not affect --verbose or --debug-file or logging to syslog.
Verbose mode. Multiple -v flags can be stacked on the command line (e.g., -vvv) to increase verbosity.
Level of debugging detail in output. Defaults to the number of --verbose flags specified on the command line, or to 1 if verbose=1 in a stonith device configuration (i.e., on stdin).
Write debug information to given file Obsoletes: debug
Display version information and exit
Display help and exit
Separator for plug parameter when specifying more than 1 plug (Default Value: ,)
Wait X seconds before fencing is started (Default Value: 0)
Disable timeout (true/false) (default: true when run from Pacemaker 2.0+)
Path to ipmitool binary (Default Value: /usr/bin/ipmitool)
Wait X seconds for cmd prompt after login (Default Value: 5)
Make "port/plug" to be an alias to IP address
Test X seconds for status change after ON/OFF (Default Value: 20)
Wait X seconds after issuing ON/OFF (Default Value: 2)
Wait X seconds for cmd prompt after issuing command (Default Value: 3)
Sleep X seconds between status calls during a STONITH action (Default Value: 1)
Timeout (sec) for IPMI operation (Default Value: 2)
Count of attempts to retry power on (Default Value: 1)
Use sudo (without password) when calling 3rd party software Obsoletes: sudo
Path to sudo binary (Default Value: /usr/bin/sudo)
2009-10-20 fence_ipmilanplus (Fence Agent)