NAME¶

sge — Silicon Integrated Systems SiS190/191 Fast/Gigabit Ethernet driver

SYNOPSIS¶

To compile this driver into the kernel, place the following lines in your kernel configuration file:

Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

if_sge_load="YES"

DESCRIPTION¶

The sge device driver provides support for SiS190 Fast Ethernet controllers and SiS191 Fast/Gigabit Ethernet controllers.

All LOMs supported by the sge driver have TCP/UDP/IP checksum offload for transmit and receive, TCP segmentation offload (TSO), hardware VLAN tag stripping/insertion features. Due to lack of documentation Wake On Lan (WOL), Jumbo frame and an interrupt moderation mechanism are not supported yet.

The sge driver supports the following media types:

autoselect

Enable autoselection of the media type and options. The user can manually override the autoselected mode by adding media options to rc.conf(5).

10baseT/UTP

Set 10Mbps operation.

100baseTX

Set 100Mbps (Fast Ethernet) operation.

1000baseTX

Set 1000baseTX operation over twisted pair.

The sge driver supports the following media options:

full-duplex

Force full duplex operation.

half-duplex

Force half duplex operation.

For more information on configuring this device, see ifconfig(8).

HARDWARE¶

The sge device driver provides support for the following Ethernet controllers:

• SiS190 Fast Ethernet controller
• SiS191 Fast/Gigabit Ethernet controller

SEE ALSO¶

altq(4), arp(4), miibus(4), netintro(4), ng_ether(4), rgephy(4), vlan(4), ifconfig(8)

HISTORY¶

The sge driver was written by Alexander Pohoyda <alexander.pohoyda@gmx.net>. And enhanced by Nikolay Denev <ndenev@gmail.com>. It first appeared in FreeBSD 8.1.