<svg width="120" height="80">
	<rect fill="red"     width="40" height="40"  x="0"   y="0"  />
	<rect fill="lime"    width="40" height="40"  x="40"  y="0"  />
	<rect fill="blue"    width="40" height="40"  x="80"  y="0"  />
	<rect fill="cyan"    width="40" height="40"  x="0"   y="40" />
	<rect fill="magenta" width="40" height="40"  x="40"  y="40" />
	<rect fill="yellow"  width="40" height="40"  x="80"  y="40" />
</svg>

filename_without_colon.svg
filename:with:colon.svg:

image.svg:!

image.svg:60x60

image.svg:0x60
image.svg:60x0

image.svg:-0x0

image.svg:0x-0

image.svg:-30-0
image.svg:-0+10
image.svg:-30+10

image.svg:@180
image.svg:@-90
image.svg:@30
image.svg:@57.3

image.svg:*2
image.svg:/2
image.svg:/3x
image.svg:/2y

image.svg:@30*0.6

image.svg:*2/3
image.svg:/3x/2y

image.svg:-30+10@30/3x/2y

image.svg:-30+10@30/-3x/2y

image.svg:-0x0-30+10@30/3x/2y

image.svg:!-0x0-30+10@30/3x/2y

-adobe-courier-bold-r-normal--10-100-75-75-m-60-ISO8859-1
-adobe-courier-bold-r-normal--10-*
-*-fixed-medium-o-normal--14-*-ISO8859-15

-adobe-courier-bold-r-normal--10-*

-adobe-courier-bold-r-normal--10-*-ISO8859-1

-adobe-courier-bold-r-normal--10-*-ISO8859-15.

-adobe-courier-bold-r-normal--14-*,-*-courier-medium-r-normal--14-*

"xft:Luxi Mono"
"xft:Luxi Mono:Medium:Roman:size=14:encoding=iso8859-1"

xft:Verdana:pixelsize=14;-adobe-courier-bold-r-normal--14-*

StringEncoding=enc:_full_font_name_

StringEncoding=jisx0208.1983-0:-*-fixed-medium-r-*-ja-*-iso10646-1

"StringEncoding=jisx0208.1983-0:xft:Bitstream Cyberbit"

-*-fixed-medium-r-*-ja-*-iso10646-1

"StringEncoding=UTF-8:xft:Bitstream Cyberbit"

"xft:Bitstream Cyberbit:encoding=iso10646-1"

StringEncoding=UTF-8:-*-pretty_font-*-12-*

-misc-fixed-*--20-*-my_utf8-36

MenuStyle * Font -misc-fixed-*--20-*-my_utf8-36/iso10646-1

Style * Font -misc-fixed-*--14-*-iso8859-1/*/latin1

Style * Font \
	-misc-fixed-*--14-*-local8859-6/iso8859-6/local_iso8859_6_iconv

Shadow=size [offset] [directions]]:

Function (rest of command)

Module (rest of command)

HelpMe

Popup menus can appear everywhere on the screen on their own or attached to a part of a window. The Popup command opens popup menus. If the popup menu was invoked with a mouse button held down, it is closed when the button is released. The item under the pointer is then activated and the associated action is executed.

Menu is a very similar command, but the menus it opens are slightly less transient. When invoked by clicking a mouse button, it stays open and can be navigated with no button held. But if it is invoked by a button press followed by mouse motion, it behaves exactly like a popup menu.

Tear off menus or Pin up menus are menus from either of the above two commands that have been "torn off" their original context and pinned on the desktop like a normal window. They are created from other menus by certain key presses or mouse sequences or with the TearMenuOff command from inside a menu.

Sub menus are menus inside menus. When a menu item that has the Popup command as its action is selected, the named menu is opened as an inferior menu to the parent. Any type of menu can have sub menus.

Additionally, if the menu is too long to fit on the screen, the excess menu items are put in a continuation menu and a sub menu with the string "More..." is placed at the bottom of the menu. The "More..." string honors the locale settings.

Finally, there may be a picture running up either side of the menu (a "side bar").

Scrolling a mouse wheel over a menu either wraps the pointer along the menu (default), scrolls the menu under the pointer or act as if the menu was clicked depending on the MouseWheel menu style.

Clicking on a selected item activates it - what happens exactly depends on the type of the item.

Clicking on a title, a separator, the side bar, or outside the menu closes the menu (exception: tear off menus can not be closed this way). Pressing mouse button 2 over a menu title or activating a tear off bar creates a tear off menu from the current menu. Clicking on a normal menu item invokes the command that is bound to it, and clicking on a sub menu item either closes all open menus and replaces them with the sub menu or posts the menu (default).

Posting menus is meant to ease mouse navigation. Once a sub menu is posted, only items from that sub menu can be selected. This can be very useful to navigate the menu if the pointer tends to stray off the menu. To unpost the menu and revert back to normal operation, either click on the same sub menu item or press any key.

Items can be selected directly by pressing a hotkey that can be configured individually for each menu item. The hotkey is indicated by underlining it in the menu item label. With the AutomaticHotkeys menu style fvwm automatically assigns hotkeys to all menu items.

The most basic keys to navigate through menus are the cursor keys (move up or down one item, enter or leave a sub menu), Space (activate item) and Escape (close menu). Numerous other keys can be used to navigate through menus by default:

Enter, Return, Space activate the current item.

Escape, Delete, Ctrl-G exit the current sequence of menus or destroy a tear off menu.

J, N, Cursor-Down, Tab, Meta-Tab, Ctrl-F, move to the next item.

K, P, Cursor-Up, Shift-Tab, Shift-Meta-Tab, Ctrl-B, move to the prior item.

L, Cursor-Right, F enter a sub menu.

H, Cursor-Left, B return to the prior menu.

Ctrl-Cursor-Up, Ctrl-K Ctrl-P, Shift-Ctrl-Meta-Tab, Page-Up move up five items.

Ctrl-Cursor-Down, Ctrl-J Ctrl-N, Ctrl-Meta-Tab Page-Down move down five items.

Shift-P, Home, Shift-Cursor-Up, Ctrl-A move to the first item.

Shift-N, End, Shift-Cursor-Down, Ctrl-E move to the last item.

Meta-P, Meta-Cursor-Up, Ctrl-Cursor-Left, Shift-Ctrl-Tab, move up just below the next separator.

Meta-N, Meta-Cursor-Down, Ctrl-Cursor-Right, Ctrl-Tab, move down just below the next separator.

Insert opens the "More..." sub menu if any.

Backspace tears off the menu.

It is not possible to override the key Escape with no modifiers for closing the menu. Neither is it possible to undefine mouse button 1, the arrow keys or the enter key for minimal navigation.

MenuClose exits from the current sequence of menus or destroys a tear off menu.

MenuCloseAndExec exits from the current sequence of menus or destroys a tear off menu and executes the rest of the line as a command.

MenuEnterContinuation opens the "More..." sub menu if any.

MenuEnterSubmenu enters a sub menu.

MenuLeaveSubmenu returns to the prior menu.

MenuMoveCursor n [m] moves the selection to another item. If the first argument is zero the second argument specifies an absolute item in the menu to move the pointer to. Negative items are counted from the end of the menu. If the first argument is non-zero, the second argument must be omitted, and the first argument specifies a relative change in the selected item. The positions may be suffixed with a 's' to indicate that the items should refer only to the first items after separators.

MenuCursorLeft enters a sub menu with the SubmenusLeft menu style, and returns to the prior menu with the SubmenusRight menu style.

MenuCursorRight enters a sub menu with the SubmenusRight menu style, and returns to the prior menu with the SubmenusLeft menu style.

MenuSelectItem triggers the action for the menu item.

MenuScroll n performs menu scrolling according to the MouseWheel menu style with n items. The distance can be suffixed with an 's' to indicate the items should refer only to the first items after separators.

MenuTearOff turns a normal menu into a "torn off" menu. See Tear Off Menus for details.

The builtin tear off actions can be overridden by undefining the builtin menu actions bound to tear off. To remove the builtin mouse button 2 binding, use:

Mouse 2 MT A -

and to remove the builtin backspace binding, use:

Key Backspace M A -

See the section Menu Bindings for details on how to assign other bindings for tear off.

Note that prior to fvwm 2.5.20 the tear off mouse bindings were redefined in different way, which no longer work.

The window containing the menu is placed as any other window would be. If you find it confusing to have your tear off menus appear at random positions on the screen, put this line in your configuration file:

Style fvwm_menu UsePPosition

To remove borders and buttons from a tear-off menu but keep the menu title, you can use

Style fvwm_menu !Button 0, !Button 1
Style fvwm_menu !Button 2, !Button 3
Style fvwm_menu !Button 4, !Button 5
Style fvwm_menu !Button 6, !Button 7
Style fvwm_menu !Button 8, !Button 9
Style fvwm_menu Title, HandleWidth 0

A tear off menu is a cross breeding between a window and a menu. The menu is swallowed by a window and its title is stripped off and displayed in the window title. The main advantage is that the menu becomes permanent - activating an item does not close the menu. Therefore, it can be used multiple times without reopening it. To destroy such a menu, close its window or press the Escape key.

Tear off menus behave somewhat differently than normal menus and windows. They do not take the keyboard focus, but while the pointer is over one of them, all key presses are sent to the menu. Other fvwm key bindings are disabled as long as the pointer is inside the tear off menu or one of its sub menus. When the pointer leaves this area, all sub menus are closed immediately. Note that the window containing a tear off menu is never hilighted as if it had the focus.

A tear off menu is an independent copy of the menu it originated from. As such, it is not affected by adding items to that menu or changing its menu style.

To create a tear off menu without opening the normal menu first, the option TearOffImmediately can be added to the Menu or Popup command.

AddToMenu Utilities Utilities Title


 + Xterm           Exec  exec xterm -e tcsh


 + Rxvt            Exec  exec rxvt


 + "Remote Logins" Popup Remote-Logins


 + Top             Exec  exec rxvt -T Top -n Top -e top


 + Calculator      Exec  exec xcalc


 + Xman            Exec  exec xman


 + Xmag            Exec  exec xmag


 + emacs           Exec  exec xemacs


 + Mail            MailFunction xmh "-font fixed"


 + ""              Nop


 + Modules         Popup Module-Popup


 + ""              Nop


 + Exit Fvwm       Popup Quit-Verify

The menu could be invoked via

Mouse 1 R A Menu Utilities Nop

or

Mouse 1 R A Popup Utilities

There is no end-of-menu symbol. Menus do not have to be defined in a contiguous region of the config file. The quoted (or first word) portion in the above examples is the menu label, which appears in the menu when the user pops it up. The remaining portion is an fvwm command which is executed if the user selects that menu item. An empty menu-label ("") and the Nop function are used to insert a separator into the menu.

The keywords DynamicPopUpAction and DynamicPopDownAction have a special meaning when used as the name of a menu item. The action following the keyword is executed whenever the menu is popped up or down. This way you can implement dynamic menus. It is even possible to destroy itself with DestroyMenu and the rebuild from scratch. When the menu has been destroyed (unless you used the recreate option when destroying the menu), do not forget to add the dynamic action again.

Note: Do not trigger actions that require user interaction. They may fail and may screw up your menus. See the Silent command.

Warning
Do not issue MenuStyle commands as dynamic menu actions. Chances are good that this crashes fvwm.

There are several configurable scripts installed together with fvwm for automatic menu generation. They have their own man pages. Some of them, specifically fvwm-menu-directory and fvwm-menu-desktop, may be used with DynamicPopupAction to create a directory listing or GNOME/KDE application listing.

Example (File browser):

# You can find the shell script fvwm_make_browse_menu.sh
# in the utils/ directory of the distribution.
AddToMenu BrowseMenu
+ DynamicPopupAction PipeRead \


  'fvwm_make_browse_menu.sh BrowseMenu'

Example (Picture menu):

# Build a menu of all .jpg files in
# $HOME/Pictures
AddToMenu JpgMenu foo title
+ DynamicPopupAction Function MakeJpgMenu
AddToFunc MakeJpgMenu
+ I DestroyMenu recreate JpgMenu
+ I AddToMenu JpgMenu Pictures Title
+ I PipeRead 'for i in $HOME/Pictures/*.jpg; \


  do echo AddToMenu JpgMenu "`basename $i`" Exec xv $i; done'

The keyword MissingSubmenuFunction has a similar meaning. It is executed whenever you try to pop up a sub menu that does not exist. With this function you can define and destroy menus on the fly. You can use any command after the keyword, but if the name of an item (that is a submenu) defined with AddToFunc follows it, fvwm executes this command:

Function <function-name> <submenu-name>

i.e. the name is passed to the function as its first argument and can be referred to with "$0".

The fvwm-menu-directory script mentioned above may be used with MissingSubmenuFunction to create an up to date recursive directory listing.

Example:

# There is another shell script fvwm_make_directory_menu.sh
# in the utils/ directory of the distribution. To use it,
# define this function in your configuration file:
DestroyFunc MakeMissingDirectoryMenu
AddToFunc MakeMissingDirectoryMenu
+ I PipeRead fvwm_make_directory_menu.sh $0
DestroyMenu SomeMenu
AddToMenu SomeMenu
+ MissingSubmenuFunction MakeMissingDirectoryMenu
+ "Root directory" Popup /

This is another implementation of the file browser that uses sub menus for subdirectories.

Titles can be used within the menu. If you add the option top behind the keyword Title, the title is added to the top of the menu. If there was a title already, it is overwritten.

AddToMenu Utilities Tools Title top

All text up to the first Tab in the menu label is aligned to the left side of the menu, all text right of the first Tab is aligned to the left in a second column and all text thereafter is placed right aligned in the third column. All other Tab s are replaced by spaces. Note that you can change this format with the ItemFormat option of the MenuStyle command.

If the menu-label contains an ampersand ('&'), the next character is taken as a hot-key for the menu item. Hot-keys are underlined in the label. To get a literal '&', insert "&&". Pressing the hot-key moves through the list of menu items with this hot-key or selects an item that is the only one with this hot-key.

If the menu-label contains a sub-string which is set off by stars, then the text between the stars is expected to be the name of an image file to insert in the menu. To get a literal '*', insert "**". For example

+ Calculator*xcalc.xpm* Exec exec xcalc

inserts a menu item labeled "Calculator" with a picture of a calculator above it. The following:

+ *xcalc.xpm*           Exec exec xcalc

Omits the "Calculator" label, but leaves the picture.

If the menu-label contains a sub-string which is set off by percent signs, then the text between the percent signs is expected to be the name of image file (a so called mini icon to insert to the left of the menu label. A second mini icon that is drawn at the right side of the menu can be given in the same way. To get a literal '%', insert "%%". For example

+ Calculator%xcalc.xpm% Exec exec xcalc

inserts a menu item labeled "Calculator" with a picture of a calculator to the left. The following:

+ %xcalc.xpm%           Exec exec xcalc

Omits the "Calculator" label, but leaves the picture. The pictures used with this feature should be small (perhaps 16x16).

If the menu-name (not the label) contains a sub-string which is set off by at signs ('@'), then the text between them is expected to be the name of an image file to draw along the left side of the menu (a side pixmap). You may want to use the SidePic option of the MenuStyle command instead. To get a literal '@', insert "@@". For example

AddToMenu StartMenu@linux-menu.xpm@

creates a menu with a picture in its bottom left corner.

If the menu-name also contains a sub-string surrounded by '^'s, then the text between '^'s is expected to be the name of an X11 color and the column containing the side picture is colored with that color. You can set this color for a menu style using the SideColor option of the MenuStyle command. To get a literal '^', insert "^^". Example:

AddToMenu StartMenu@linux-menu.xpm@^blue^

creates a menu with a picture in its bottom left corner and colors with blue the region of the menu containing the picture.

In all the above cases, the name of the resulting menu is name specified, stripped of the substrings between the various delimiters.

The pointer is warped to where it was when the menu was invoked if it was both invoked and closed with a keystroke.

The position arguments allow placement of the menu somewhere on the screen, for example centered on the visible screen or above a title bar. Basically it works like this: you specify a context-rectangle and an offset to this rectangle by which the upper left corner of the menu is moved from the upper left corner of the rectangle. The position arguments consist of several parts:

[context-rectangle] x y [special-options]

The context-rectangle can be one of:

Root

XineramaRoot

Mouse

Window

Interior

Title

Button<n>

Icon

Menu

Item

Context

This

Rectangle <geometry>

If the context-rectangle is omitted or illegal (e.g. "item" on a window), "Mouse" is the default. Note that not all of these make sense under all circumstances (e.g. "Icon" if the pointer is on a menu).

The offset values x and y specify how far the menu is moved from its default position. By default, the numeric value given is interpreted as a percentage of the context rectangle's width (height), but with a trailing 'm' the menu's width (height) is used instead. Furthermore a trailing 'p' changes the interpretation to mean pixels.

Instead of a single value you can use a list of values. All additional numbers after the first one are separated from their predecessor by their sign. Do not use any other separators.

If x or y are prefixed with "'o<number>" where <number> is an integer, the menu and the rectangle are moved to overlap at the specified position before any other offsets are applied. The menu and the rectangle are placed so that the pixel at <number> percent of the rectangle's width/height is right over the pixel at <number> percent of the menu's width/height. So "o0" means that the top/left borders of the menu and the rectangle overlap, with "o100" it's the bottom/right borders and if you use "o50" they are centered upon each other (try it and you will see it is much simpler than this description). The default is "o0". The prefix "o<number>" is an abbreviation for "+<number>-<number>m".

A prefix of 'c' is equivalent to "o50". Examples:

# window list in the middle of the screen
WindowList Root c c
# menu to the left of a window
Menu name window -100m c+0
# popup menu 8 pixels above the mouse pointer
Popup name mouse c -100m-8p
# somewhere on the screen
Menu name rectangle 512x384+1+1 +0 +0
# centered vertically around a menu item
AddToMenu foobar-menu


 + "first item" Nop


 + "special item" Popup "another menu" item +100 c


 + "last item" Nop
# above the first menu item
AddToMenu foobar-menu


 + "first item" Popup "another menu" item +0 -100m

Note that you can put a sub menu far off the current menu so you could not reach it with the mouse without leaving the menu. If the pointer leaves the current menu in the general direction of the sub menu the menu stays up.

The special-options:

To create a tear off menu without opening the normal menu, add the option TearOffImmediately. Normally the menu opens in normal state for a split second before being torn off. As tearing off places the menu like any other window, a position should be specified explicitly:

# Forbid fvwm to place the menu window
Style <name of menu> UsePPosition
# Menu at top left corner of screen
Menu Root 0p 0p TearOffImmediately

The Animated and Mwm or Win menu styles may move a menu somewhere else on the screen. If you do not want this you can add Fixed as an option. This might happen for example if you want the menu always in the top right corner of the screen.

Where do you want a menu to appear when you click on its menu item? The default is to place the title under the cursor, but if you want it where the position arguments say, use the SelectInPlace option. If you want the pointer on the title of the menu, use SelectWarp too. Note that these options apply only if the PopupAsRootMenu MenuStyle option is used.

The pointer is warped to the title of a sub menu whenever the pointer would be on an item when the sub menu is popped up (fvwm menu style) or never warped to the title at all (Mwm or Win menu styles). You can force (forbid) warping whenever the sub menu is opened with the WarpTitle (NoWarp) option.

Note that the special-options do work with a normal menu that has no other position arguments.

options is a comma separated list containing some of the keywords Fvwm / Mwm / Win, BorderWidth, Foreground, Background, Greyed, HilightBack / !HilightBack, HilightTitleBack, ActiveFore / !ActiveFore, MenuColorset, ActiveColorset, GreyedColorset, TitleColorset, Hilight3DThick / Hilight3DThin / Hilight3DOff, Hilight3DThickness, Animation / !Animation, Font, TitleFont, MenuFace, PopupDelay, PopupOffset, TitleWarp / !TitleWarp, TitleUnderlines0 / TitleUnderlines1 / TitleUnderlines2, SeparatorsLong / SeparatorsShort, TrianglesSolid / TrianglesRelief, PopupImmediately / PopupDelayed, PopdownImmediately / PopdownDelayed, PopupActiveArea, DoubleClickTime, SidePic, SideColor, PopupAsRootMenu / PopupAsSubmenu / PopupIgnore / PopupClose, RemoveSubmenus / HoldSubmenus, SubmenusRight / SubmenusLeft, SelectOnRelease, ItemFormat, VerticalItemSpacing, VerticalMargins, VerticalTitleSpacing, AutomaticHotkeys / !AutomaticHotkeys, UniqueHotkeyActivatesImmediate / !UniqueHotkeyActivatesImmediate, MouseWheel, ScrollOffPage / !ScrollOffPage, TrianglesUseFore / !TrianglesUseFore.

In the above list some options are listed as option pairs or triples with a '/' in between. These options exclude each other. All paired options can be negated to have the effect of the counterpart option by prefixing ! to the option.

Some options are now negated by prefixing ! to the option. This is the preferred form for all such options. The other negative forms are now deprecated and will be removed in the future.

This is a list of MenuStyle deprecated negative options: ActiveForeOff, AnimationOff, AutomaticHotkeysOff, HilightBackOff, TitleWarpOff

Fvwm, Mwm, Win reset all options to the style with the same name in former versions of fvwm. The default for new menu styles is Fvwm style. These options override all others except Foreground, Background, Greyed, HilightBack, ActiveFore and PopupDelay, so they should be used only as the first option specified for a menu style or to reset the style to defined behavior. The same effect can be created by setting all the other options one by one.

Mwm and Win style menus popup sub menus automatically. Win menus indicate the current menu item by changing the background to dark. Fvwm sub menus overlap the parent menu, Mwm and Win style menus never overlap the parent menu.

Fvwm style is equivalent to !HilightBack, Hilight3DThin, !ActiveFore, !Animation, Font, MenuFace, PopupOffset 0 67, TitleWarp, TitleUnderlines1, SeparatorsShort, TrianglesRelief, PopupDelayed, PopdownDelayed, PopupDelay 150, PopdownDelay 150, PopupAsSubmenu, HoldSubmenus, SubmenusRight, BorderWidth 2, !AutomaticHotkeys, UniqueHotkeyActivatesImmediate, PopupActiveArea 75.

Mwm style is equivalent to !HilightBack, Hilight3DThick, !ActiveFore, !Animation, Font, MenuFace, PopupOffset -3 100, !TitleWarp, TitleUnderlines2, SeparatorsLong, TrianglesRelief, PopupImmediately, PopdownDelayed, PopdownDelay 150, PopupAsSubmenu, HoldSubmenus, SubmenusRight, BorderWidth 2, UniqueHotkeyActivatesImmediate, !AutomaticHotkeys, PopupActiveArea 75.

Win style is equivalent to HilightBack, Hilight3DOff, ActiveFore, !Animation, Font, MenuFace, PopupOffset -5 100, !TitleWarp, TitleUnderlines1, SeparatorsShort, TrianglesSolid, PopupImmediately, PopdownDelayed, PopdownDelay 150, PopupAsSubmenu, RemoveSubmenus, SubmenusRight, BorderWidth 2, UniqueHotkeyActivatesImmediate, !AutomaticHotkeys, PopupActiveArea 75.

BorderWidth takes the thickness of the border around the menus in pixels. It may be zero to 50 pixels. The default is 2. Using an illegal value reverts the border width to the default.

Foreground and Background may have a color name as an argument. This color is used for menu text or the menu's background. You can omit the color name to reset these colors to the built-in default.

Greyed may have a color name as an argument. This color is the one used to draw a menu-selection which is prohibited (or not recommended) by the Mwm hints which an application has specified. If the color is omitted the color of greyed menu entries is based on the background color of the menu.

HilightBack and !HilightBack switch hilighting the background of the selected menu item on and off. A specific background color may be used by providing the color name as an argument to HilightBack. If you use this option without an argument the color is based on the menu's background color. The ActiveColorset option overrides the specified color. If the colorset has a non solid background it is used for the hilighting.

HilightTitleBack switches hilighting the background of menu titles on. If a TitleColorset was used, the background colour is taken from there. Otherwise the color is based on the menu's background color. If the colorset has a non solid background it is used for the hilighting.

ActiveFore and !ActiveFore switch hilighting the foreground of the selected menu item on and off. A specific foreground color may be used by providing the color name as an argument to ActiveFore. Omitting the color turns hilighting on when an ActiveColorset is used. ActiveFore turns off hilighting the foreground completely. The ActiveColorset option overrides the specified color.

MenuColorset controls if a colorset is used instead of the Foreground, Background and MenuFace menu styles. If the MenuColorset keyword is followed by a number equal to zero or greater, this number is taken as the number of the colorset to use. If the number is omitted, the colorset is switched off and the regular menu styles are used again. The foreground and background colors of the menu items are replaced by the colors from the colorset. If the colorset has a pixmap defined, this pixmap is used as the background of the menu. Note that the MenuFace menu style has been optimized for memory consumption and may use less memory than the background from a colorset. The shape mask from the colorset is used to shape the menu. Please refer to the Colorsets section for details about colorsets.

ActiveColorset works exactly like MenuColorset, but the foreground from the colorset replaces the color given with the ActiveFore menu style and the colorset's background color replaces the color given with the HilightBack command (to turn on background hilighting you have to use the HilightBack menu style too). If specified, the hilight and shadow colors from the colorset are used too. The pixmap and shape mask from the colorset are not used. Hilighting the background or foreground can be turned off individually with the !ActiveFore or !HilightBack menu styles.

GreyedColorset works exactly like MenuColorset, but the foreground from the colorset replaces the color given with the Greyed menu style. No other parts of the colorset are used.

TitleColorset works exactly like MenuColorset, but is used only for menu titles.

Hilight3DThick, Hilight3DThin and Hilight3DOff determine if the selected menu item is hilighted with a 3D relief. Thick reliefs are two pixels wide, thin reliefs are one pixel wide.

Hilight3DThickness takes one numeric argument that may be between -50 and +50 pixels. With negative values the menu item gets a pressed in look. The above three commands are equivalent to a thickness of 2, 1 and 0.

Animation and !Animation turn menu animation on or off. When animation is on, sub menus that do not fit on the screen cause the parent menu to be shifted to the left so the sub menu can be seen.

Font and TitleFont take a font name as an argument. If a font by this name exists it is used for the text of all menu items. If it does not exist or if the name is left blank the built-in default is used. If a TitleFont is given, it is used for all menu titles instead of the normal font.

MenuFace enforces a fancy background upon the menus. You can use the same options for MenuFace as for the ButtonStyle. See description of ButtonStyle command and the Color Gradients sections for more information. If you use MenuFace without arguments the style is reverted back to normal.

Some examples of MenuFaces are:

MenuFace DGradient 128 2 lightgrey 50 blue 50 white
MenuFace TiledPixmap texture10.xpm
MenuFace HGradient 128 2 Red 40 Maroon 60 White
MenuFace Solid Maroon

Note: The gradient styles H, V, B and D are optimized for high speed and low memory consumption in menus. This is not the case for all the other gradient styles. They may be slow and consume huge amounts of memory, so if you encounter performance problems with them you may be better off by not using them. To improve performance you can try one or all of the following:

Turn hilighting of the active menu item other than foreground color off:

MenuStyle <style> Hilight3DOff, !HilightBack
MenuStyle <style> ActiveFore <preferred color>

Make sure sub menus do not overlap the parent menu. This can prevent menus being redrawn every time a sub menu pops up or down.

MenuStyle <style> PopupOffset 1 100

Run your X server with backing storage. If your X Server is started with the -bs option, turn it off. If not try the -wm and +bs options:

startx -- -wm +bs

You may have to adapt this example to your system (e.g. if you use xinit to start X).

PopupDelay requires one numeric argument. This value is the delay in milliseconds before a sub menu is popped up when the pointer moves over a menu item that has a sub menu. If the value is zero no automatic pop up is done. If the argument is omitted the built-in default is used. Note that the popup delay has no effect if the PopupImmediately option is used since sub menus pop up immediately then.

PopupImmediately makes menu items with sub menus pop up it up as soon as the pointer enters the item. The PopupDelay option is ignored then. If PopupDelayed is used fvwm looks at the PopupDelay option if or when this automatic popup happens.

PopdownDelay works exactly like PopupDelay but determines the timeout of the PopupDelayed style.

PopdownImmediately makes sub menus vanish as soon as the pointer leaves the sub menu and the correspondent item in the parent menu. With the opposite option PopdownDelayed the sub menu only pops down after the time specified with the PopdownDelay option. This comes handy when the pointer often strays off the menu item when trying to move into the sub menu. Whenever there is a conflict between the PopupImmediately, PopupDelayed, PopupDelay styles and the PopdownImmediately, PopdownDelayed, PopdownDelay styles, the Popup... styles win when using mouse navigation and the Popdown... styles win when navigating with the keyboard.

PopupOffset requires two integer arguments. Both values affect where sub menus are placed relative to the parent menu. If both values are zero, the left edge of the sub menu overlaps the left edge of the parent menu. If the first value is non-zero the sub menu is shifted that many pixels to the right (or left if negative). If the second value is non-zero the menu is moved by that many percent of the parent menu's width to the right or left.

PopupActiveArea requires an integer value between 51 and 100. Normally, when the pointer is over a menu item with a sub menu and the pointer enters the area that starts at 75% of the menu width, the sub menu is shown immediately. This percentage can be changed with PopupActiveArea. Setting this value to 100 disables this kind of automatic popups altogether. The default value is restored if no or an illegal value is given.

TitleWarp and !TitleWarp affect if the pointer warps to the menu title when a sub menu is opened or not. Note that regardless of this setting the pointer is not warped if the menu does not pop up under the pointer.

TitleUnderlines0, TitleUnderlines1 and TitleUnderlines2 specify how many lines are drawn below a menu title.

SeparatorsLong and SeparatorsShort set the length of menu separators. Long separators run from the left edge all the way to the right edge. Short separators leave a few pixels to the edges of the menu.

TrianglesSolid and TrianglesRelief affect how the small triangles for sub menus is drawn. Solid triangles are filled with a color while relief triangles are hollow.

DoubleClickTime requires one numeric argument. This value is the time in milliseconds between two mouse clicks in a menu to be considered as a double click. The default is 450 milliseconds. If the argument is omitted the double click time is reset to this default.

SidePic takes the name of an image file as an argument. The picture is drawn along the left side of the menu. The SidePic option can be overridden by a menu specific side pixmap (see AddToMenu). If the file name is omitted an existing side pixmap is removed from the menu style.

SideColor takes the name of an X11 color as an argument. This color is used to color the column containing the side picture (see above). The SideColor option can be overridden by a menu specific side color (see AddToMenu). If the color name is omitted the side color option is switched off.

PopupAsRootMenu, PopupAsSubmenu, PopupIgnore and PopupClose change the behavior when you click on a menu item that opens a sub menu. With PopupAsRootMenu the original menu is closed before the sub menu appears, with PopupAsSubmenu it is not, so you can navigate back into the parent menu. Furthermore, with PopupAsSubmenu the sub menu is held open (posted) regardless of where you move the mouse. Depending on your menu style this may simplify navigating through the menu. Any keystroke while a menu is posted reverts the menu back to the normal behavior. With PopupClose the menu is closed when a sub menu item is activated, and the menu stays open if PopupIgnore is used (even if the menu was invoked with the Popup command). PopupAsSubmenu is the default.

RemoveSubmenus instructs fvwm to remove sub menu when you move back into the parent menu. With HoldSubmenus the sub menu remains visible. You probably want to use HoldSubmenus if you are using the PopupDelayed style. RemoveSubmenus affects menu navigation with the keyboard.

SelectOnRelease takes an optional key name as an argument. If the given key is released in a menu using this style, the current menu item is selected. This is intended for Alt-Tab WindowList navigation. The key name is a standard X11 key name as defined in /usr/include/X11/keysymdef.h, (without the XK_ prefix), or the keysym database /usr/X11R6/lib/X11/XKeysymDB. To disable this behavior, omit the key name.

Note: Some X servers do not support KeyRelease events. SelectOnRelease does not work on such a machine.

ItemFormat takes a special string as its argument that determines the layout of the menu items. Think of the format string as if it were a menu item. All you have to do is tell fvwm where to place the different parts of the menu item (i.e. the labels, the triangle denoting a sub menu, the mini icons and the side pic) in the blank area. The string consists of spaces, Tab characters and formatting directives beginning with '%'. Any illegal characters and formatting directives are silently ignored:

%l, %c and %r

%i

%> and %<

%|

%s

Space, Tab, %Space and %Tab

%p

You can define an additional space before and after each of the objects like this:

%left.rightp

This means: if the object is defined in the menu (e.g. if it is %s and you use a side picture, or it is %l for the third column and there are items defined that actually have a third column), then add left pixels before the object and right pixels after it. You may leave out the left or the .right parts if you do not need them. All values up to the screen width are allowed. Even negative values can be used with care. The p may be replaced with any other formatting directives described above.

Note: Only items defined in the format string are visible in the menus. So if you do not put a %s in there you do not see a side picture, even if one is specified.

Note: The SubmenusLeft style changes the default ItemFormat string, but if it was set manually it is not modified.

Note: If any unformatted title of the menu is wider than the widest menu item, the spaces between the different parts of the menu items are enlarged to match the width of the title. Leading left aligned objects in the format string (%l, %i, %<, first %|) stick to the left edge of the menu and trailing right aligned objects (%r, %i, %>, second %|) stick to the right edge. The gaps between the remaining items are enlarged equally.

Examples:

MenuStyle * ItemFormat "%.4s%.1|%.5i%.5l%.5l%.5r%.5i%2.3>%1|"

Is the default string used by fvwm: (side picture + 4 pixels gap) (beginning of the hilighted area + 1 pixel gap) (mini icon + 5p) (first column left aligned + 5p) (second column left aligned + 5p) (third column right aligned + 5p) (second mini icon + 5p) (2p + sub menu triangle + 3p) (1p + end of hilighted area).

MenuStyle * ItemFormat "%.1|%3.2<%5i%5l%5l%5r%5i%1|%4s"

Is used by fvwm with the SubmenusLeft option below.

VerticalItemSpacing and VerticalTitleSpacing control the vertical spacing of menu items and titles like ItemFormat controls the horizontal spacing. Both take two numeric arguments that may range from -100 to +100. The first is the gap in pixels above a normal menu item (or a menu title), the second is the gap in pixels below it. Negative numbers do not make much sense and may screw up the menu completely. If no arguments are given or the given arguments are invalid, the built-in defaults are used: one pixel above the item or title and two below.

VerticalMargins can be used to add some padding at the top and bottom of menus. It takes two numeric arguments that must be positive integers (or zero). If the number of arguments or its values are incorrect, fvwm defaults both to 0, which means no padding at all. If the values are correct, the first one is used for the top margin, and the second one is used for the bottom margin.

SubmenusLeft mirrors the menu layout and behavior. Sub menus pop up to the left, the sub menu triangle is drawn left and the mini icon and side picture are drawn at the right side of the menu. The default is SubmenusRight. The position hints of a menu are also affected by this setting, i.e. position hints using item or menu as context rectangle and position hints using m offsets.

AutomaticHotkeys and !AutomaticHotkeys control the menu's ability to automatically provide hot-keys on the first character of each menu item's label. This behavior is always overridden if an explicit hot-key is assigned in the AddToMenu command.

UniqueHotkeyActivatesImmediate and !UniqueHotkeyActivatesImmediate controls how menu items are invoked when used with hotkeys. By default, if a given menu entry only has one completeable match for a given hotkey, the action for that menu entry is invoked and the menu is closed. This is due to the UniqueHotkeyActivatesImmediate option. However, the menu can be told to remain open, waiting for the user to invoke the selected item instead when there is only one matched item for a given hotkey, by using the !UniqueHotkeyActivatesImmediate option.

MouseWheel controls the ability to scroll the menu using a mouse wheel. It takes one argument, that can be one of ScrollsPointer, ScrollsMenu, ScrollsMenuBackwards or ActivatesItem. ScrollsPointer makes the mouse wheel scroll the pointer over a menu. This is the default. ScrollsMenu and ScrollsMenuBackwards scroll the menu beneath the pointer. ActivatesItem disables scrolling by mouse wheel and makes the use of a mouse wheel act as if the menu was clicked. If no argument is supplied the default setting is restored.

ScrollOffPage allows a menu to be scrolled out of the visible area if MouseWheel is set to ScrollsMenu or ScrollsMenuBackwards. This is the default. The opposite, !ScrollOffPage disables this behaviour.

TrianglesUseFore draws sub menu triangles with the foreground color of the menu colorset (normally drawn with the hilight color). !TrianglesUseFore disables this behaviour.

Examples:

MenuStyle * Mwm
MenuStyle * Foreground Black, Background gray40
MenuStyle * Greyed gray70, ActiveFore White
MenuStyle * !HilightBack, Hilight3DOff
MenuStyle * Font lucidasanstypewriter-14
MenuStyle * MenuFace DGradient 64 darkgray MidnightBlue
MenuStyle red Mwm
MenuStyle red Foreground Yellow
MenuStyle red Background Maroon
MenuStyle red Greyed Red, ActiveFore Red
MenuStyle red !HilightBack, Hilight3DOff
MenuStyle red Font lucidasanstypewriter-12
MenuStyle red MenuFace DGradient 64 Red Black

Note that all style options could be placed on a single line for each style name.

Sets the menu style. When using monochrome the colors are ignored. The shadecolor is the one used to draw a menu-selection which is prohibited (or not recommended) by the Mwm hints which an application has specified. The style option is either Fvwm, Mwm or Win, which changes the appearance and operation of the menus.

Mwm and Win style menus popup sub menus automatically. Win menus indicate the current menu item by changing the background to black. Fvwm sub menus overlap the parent menu, Mwm and Win style menus never overlap the parent menu.

When the anim option is given, sub menus that do not fit on the screen cause the parent menu to be shifted to the left so the sub menu can be seen. See also SetAnimation command.

To bind a previously defined pop-up menu to a key or mouse button:

The following example binds mouse buttons 2 and 3 to a pop-up called "Window Ops". The menu pops up if the buttons 2 or 3 are pressed in the window frame, side-bar, or title-bar, with no modifiers (none of shift, control, or meta).

Mouse 2 FST N Popup "Window Ops"
Mouse 3 FST N Popup "Window Ops"

Pop-ups can be bound to keys through the use of the Key command. Pop-ups can be operated without using the mouse by binding to keys and operating via the up arrow, down arrow, and enter keys.

To bind a previously defined pop-up menu to another menu, for use as a sub menu:

The following example defines a sub menu "Quit-Verify" and binds it into a main menu, called "RootMenu":

AddToMenu Quit-Verify


 + "Really Quit Fvwm?" Title


 + "Yes, Really Quit"  Quit


 + "Restart Fvwm"      Restart


 + "Restart Fvwm 1.xx" Restart fvwm1 -s


 + ""                  Nop


 + "No, Don't Quit"    Nop
AddToMenu RootMenu "Root Menu" Title


 + "Open XTerm Window" Popup NewWindowMenu


 + "Login as Root"     Exec exec xterm -T Root -n Root -e su -


 + "Login as Anyone"   Popup AnyoneMenu


 + "Remote Hosts"      Popup HostMenu


 + ""                  Nop


 + "X utilities"       Popup Xutils


 + ""                  Nop


 + "Fvwm Modules"      Popup Module-Popup


 + "Fvwm Window Ops"   Popup Window-Ops


 + ""                  Nop


 + "Previous Focus"    Prev (AcceptsFocus) Focus


 + "Next Focus"        Next (AcceptsFocus) Focus


 + ""                  Nop


 + "Refresh screen"    Refresh


 + ""                  Nop


 + "Reset X defaults"  Exec xrdb -load \


                       $HOME/.Xdefaults


 + ""                  Nop


 + ""                  Nop


 + Quit                Popup Quit-Verify

Popup differs from Menu in that pop-ups do not stay up if the user simply clicks. These are popup-menus, which are a little hard on the wrist. Menu menus stay up on a click action. See the Menu command for an explanation of the interactive behavior of menus. A menu can be open up to ten times at once, so a menu may even use itself or any of its predecessors as a sub menu.

FlickeringMoveWorkaround disables ConfigureNotify events that are usually sent to an application while it is moved. If some windows flicker annoyingly while being moved, this option may help you. Note that if this problem occurs it is not an fvwm bug, it is a problem of the application.

MixedVisualWorkaround makes fvwm install the root colormap before it does some operations using the root window visuals. This is only useful when the -visual option is used to start fvwm and then only with some configurations of some servers (e.g. Exceed 6.0 with an 8 bit PseudoColor root and fvwm using a 24 bit TrueColor visual).

The ModalityIsEvil option controls whether Motif applications have the ability to have modal dialogs (dialogs that force you to close them first before you can do anything else). The default is to not allow applications to have modal dialogs. Use this option with care. Once this option is turned on, you have to restart fvwm to turn it off.

RaiseOverNativeWindows makes fvwm try to raise the windows it manages over native windows of the X server's host system. This is needed for some X servers running under Windows, Windows NT or Mac OS X. Fvwm tries to detect if it is running under such an X server and initializes the flag accordingly.

RaiseOverUnmanaged makes fvwm try to raise the windows it manages over override_redirect windows. This is used to cope with ill-mannered applications that use long-lived windows of this sort, contrary to ICCCM conventions. It is useful with the Unmanaged style option too.

FlickeringQtDialogsWorkaround suppresses flickering of the focused window in some modules when using KDE or QT applications with application modal dialog windows. By default this option is turned on. This option may be visually disturbing for other applications using windows not managed by fvwm. Since these applications are rare it is most likely safe to leave this option at its default.

QtDragnDropWorkaround suppresses the forwarding of unknown ClientEvent messages to windows -- usually this is harmless, but Qt has problems handling unrecognised ClientEvent messages. Enabling this option might therefore help for Qt applications using DragnDrop. This option is off by default.

EWMHIconicStateWorkaround is needed by EWMH compliant pagers or taskbars which represent windows which are on a different desktops as iconified. These pagers and taskbars use a version of the EWMH specification before version 1.2 (the current KDE 2 & 3 versions). These pagers and taskbars use the IconicState WM_STATE state to determine if an application is iconified. This state, according to the ICCCM, does not imply that a window is iconified (in the usual sense). Turning on this option forces fvwm to establish an equivalence between the IconicState WM_STATE state and the iconified window. This violates ICCCM compliance but should not cause big problems. By default this option is off.

With the DisplayNewWindowNames enabled, fvwm prints the name, icon name (if available), resource and class of new windows to the console. This can help in finding the correct strings to use in the Style command.

When the ExplainWindowPlacement option is enabled, fvwm prints a message to the console whenever a new window is placed or one of the commands PlaceAgain, Recapture or RecaptureWindow is used. The message explains on which desk, page, Xinerama screen and position it was placed and why. This option can be used to figure out why a specific window does not appear where you think it should.

The DebugCRMotionMethod option enables some debugging code in the ConfigureRequest handling routines of fvwm. It is not helpful for the user, but if you report a bug to the fvwm team we may ask you to enable this option.

The TransliterateUtf8 option enables transliteration during conversions from utf-8 strings. By default fvwm will not transliterate during conversion, but will fall back to alternate strings provided by the clients if conversion from utf-8 fails due to characters which have no direct correspondence in the target charecter set. Some clients however neglect to set non utf-8 properties correctly in which case this option may help.

BusyCursor DynamicMenu False, ModuleSynchronous False, \


  Read False, Wait False

The * option refers to all available options.

The Read option controls the PipeRead command.

The DynamicMenu option affects the DynamicPopupAction and MissingSubmenuFunction options of the AddToMenu command. If this option is set to "False", then the busy cursor is not displayed during a dynamic menu command even if this command is a Read or PipeRead command and the Read option is set to "True".

The ModuleSynchronous option affects the ModuleSynchronous command. If this option is set to "False", then the busy cursor is not displayed while fvwm waits for a module started by ModuleSynchronous to complete its startup.

The Wait option affects only the root cursor. During a wait pause the root cursor is replaced by the busy cursor and fvwm is still fully functional (you can escape from the pause, see the EscapeFunc command). If you want to use this option and if you do not use the default root cursor, you must set your root cursor with the CursorStyle command.

ClickTime also specifies the delay between two clicks to be interpreted as a double-click.

ColormapFocus FollowsFocus

then the installed colormap is the one for the window that currently has the keyboard focus.

POSITION (top_left_corner)

TITLE (top_left_arrow)

DEFAULT (top_left_arrow)

SYS (hand2)

MOVE (fleur)

RESIZE (sizing)

WAIT (watch)

MENU (top_left_arrow)

SELECT (crosshair)

DESTROY (pirate)

TOP (top_side)

RIGHT (right_side)

BOTTOM (bottom_side)

LEFT (left_side)

TOP_LEFT (top_left_corner)

TOP_RIGHT (top_right_corner)

BOTTOM_LEFT (bottom_left_corner)

BOTTOM_RIGHT (bottom_right_corner)

TOP_EDGE (top_side)

RIGHT_EDGE (right_side)

BOTTOM_EDGE (bottom_side)

LEFT_EDGE (left_side)

ROOT (left_ptr)

STROKE (plus)

The defaults are shown in parentheses above. If you ever want to restore the default cursor for a specific context you can omit the second argument.

The second argument is either the numeric value of the cursor as defined in the include file X11/cursorfont.h or its name (without the XC_ prefix). Alternatively, the xpm file name may be specified. The name can also be None (no cursor) or Tiny (a single pixel as the cursor).

# make the kill cursor be XC_gumby (both forms work):
CursorStyle DESTROY 56
CursorStyle DESTROY gumby

Alternatively, the cursor can be loaded from an (XPM, PNG or SVG) image file. If fvwm is compiled with Xcursor support, full ARGB is used, and (possibly animated) cursor files made with the xcursorgen program can be loaded. Otherwise the cursor is converted to monochrome.

The optional x and y arguments (following a file argument) specifies the hot-spot coordinate with 0 0 as the top left corner of the image. Coordinates within the image boundary are valid and overrides any hot-spot defined in the (XPM/Xcursor) image file. An invalid or undefined hot-spot is placed in the center of the image.

CursorStyle ROOT cursor_image.png 0 0

The optional fg and bg arguments specify the foreground and background colors for the cursor, defaulting to black and white (reverse video compared to the actual bitmap). These colors are only used with monochrome cursors. Otherwise they are silently ignored.

CursorStyle ROOT nice_arrow.xpm yellow black

DefaultColorset -1

or any variant of the DefaultColors command.

Key Escape A MC -
Key Escape A  S EscapeFunc

replaces the Ctrl-Alt-Escape key sequence with Shift-Escape for aborting a Wait pause and ModuleSynchronous command. EscapeFunc used outside the Key command does nothing.

FakeClick depth 2 press 1 wait 250 release 1

This simulates a click with button 1 in the parent window (depth 2) with a delay of 250 milliseconds between the press and the release. Note: all command names can be abbreviated with their first letter.

Save all GVim sessions with: "Esc:w\n"

All (gvim) FakeKeypress press Escape \


                        press colon \


                        press w \


                        press Return

Save & exit all GVim sessions with: "Esc:wq\n"

All (gvim) FakeKeypress press Escape \


                        press colon \


                        press w \


                        press q \


                        press Return

Send A to a specific window:

WindowId 0x3800002 FakeKeypress press A

Note: all command names can be abbreviated with their first letter.

Style * HilightFore textcolor, HilightBack backgroundcolor

instead.

Style * HilightColorset num

instead.

Style * IconFont fontname

instead.

If a directory is given in the form "/some/dir;.ext", this means all images in this directory have the extension ".ext" that should be forced. The original image name (that may contain another extension or no extension at all) is not probed, instead ".ext" is added or replaces the original extension. This is useful, for example, if a user has some image directories with ".xpm" images and other image directories with the same names, but ".png" images.

The path may contain environment variables such as $HOME (or ${HOME}). Further, a '+' in the path is expanded to the previous value of the path, allowing appending or prepending to the path easily.

For example:

ImagePath $HOME/icons:+:/usr/include/X11/bitmaps

Note: if the FvwmM4 module is used to parse your config files, then m4 may want to mangle the word "include" which frequently shows up in the ImagePath command. To fix this one may add

undefine(`include')

prior to the ImagePath command, or better: use the -m4-prefix option to force all m4 directives to have a prefix of "m4_" (see the FvwmM4 man page).

/install_prefix/share/locale;fvwm

where install_prefix is the fvwm installation directory. With such a locale path translations are searched for in

/install_prefix/share/locale/lang/LC_MESSAGES/fvwm.mo

where lang depends on the locale. If no directory is given the default directory path is assumed. If no text domain is given, fvwm is assumed. Without argument the default locale path is restored.

As for the ImagePath command, path may contain environment variables and a '+' to append or prepend the locale path easily.

For example, the fvwm-themes package uses

LocalePath ";fvwm-themes:+"

to add locale catalogs.

The default fvwm catalog contains a few strings used by the fvwm executable itself (Desk and Geometry) and strings used in some default configuration files and FvwmForm configuration. You can take a look at the po/ subdirectory of the fvwm source to get the list of the strings with a possible translation in various languages. At present, very few languages are supported.

The main use of locale catalogs is via the "$[gt.string]" parameter:

DestroyMenu MenuFvwmWindowOps
AddToMenu   MenuFvwmWindowOps "$[gt.Window Ops]" Title
+ "$[gt.&Move]"              Move
+ "$[gt.&Resize]"            Resize
+ "$[gt.R&aise]"             Raise
+ "$[gt.&Lower]"             Lower
+ "$[gt.(De)&Iconify]"       Iconify
+ "$[gt.(Un)&Stick]"         Stick
+ "$[gt.(Un)Ma&ximize]"      Maximize
+ "" Nop
+ "$[gt.&Close]"             Close
+ "$[gt.&Destroy]"           Destroy

gives a menu in the locale languages if translations are available.

Note that the FvwmScript module has a set of special instructions for string translation. It is out of the scope of this discussion to explain how to build locale catalogs. Please refer to the GNU gettext documentation.

Colors which prints information about the colors used by fvwm. This useful on screens which can only display 256 (or less) colors at once. If verbose is one or greater the palette used by fvwm is printed. If you have a limited color palette, and you run out of colors, this command might be helpful.

ImageCache which prints information about the images loaded by fvwm. If verbose is one or greater all images in the cache will be listed together with their respective reuse.

Locale which prints information on your locale and the fonts that fvwm used. verbose can be 1 or 2.

nls which prints information on the locale catalogs that fvwm used

style which prints information on fvwm styles. verbose can be 1.

bindings which prints information on all the bindings fvwm has: key, mouse and stroke bindings. verbose has no effect with this option.

infostore which prints information on all entries in the infostore, listing the key and its value. verbose has no effect with this option.

Note: A window's id as it is returned with $[w.id] can be used as the command_id. Example:

Current Schedule 1000 $[w.id] WindowShade

The Schedule command also supports the optional keyword Periodic which indicates that the command should be executed every delay_ms. Example:

Schedule Periodic 10000 PipeRead '[ -N "$MAIL" ] && echo \


     Echo You have mail'

Use the Deschedule command to stop periodic commands.

Style * Font fontname

instead.

The format of the geometry part is: desk(layer): x-geometry sticky, where desk and layer are the corresponding numbers and sticky is empty or a capital S. The geometry of iconified windows is shown in parentheses. Selecting an item from the window list pop-up menu causes the interpreted function "WindowListFunc" to be run with the window id of that window passed in as $0. The default "WindowListFunc" looks like this:

AddToFunc WindowListFunc
+ I Iconify off
+ I FlipFocus
+ I Raise
+ I WarpToWindow 5p 5p

You can destroy the built-in "WindowListFunc" and create your own if these defaults do not suit you.

The window list menu uses the "WindowList" menu style if it is defined (see MenuStyle command). Otherwise the default menu style is used. To switch back to the default menu style, issue the command

DestroyMenuStyle WindowList

Example:

MenuStyle WindowList SelectOnRelease Meta_L

The conditions can be used to exclude certain windows from the window list. Please refer to the Current command for details. Only windows that match the given conditions are displayed in the window list. The options below work vice versa: windows that would otherwise not be included in the window list can be selected with them. The conditions always override the options.

The position arguments are the same as for Menu. The command double-click-action is invoked if the user double-clicks (or hits the key rapidly twice if the menu is bound to a key) when bringing the window list. The double-click-action must be quoted if it consists of more than one word.

The double-click-action is useful to define a default window if you have bound the window list to a key (or button) like this:

# Here we call an existing function, but
# it may be different.  See the default
# WindowListFunc definition earlier in this
# man page.
AddToFunc SwitchToWindow
+ I WindowListFunc
Key Tab A M WindowList "Prev SwitchToWindow"

Hitting Alt-Tab once it brings up the window list, if you hit it twice the focus is flipped between the current and the last focused window. With the proper SelectOnRelease menu style (see example above) a window is selected as soon as you release the Alt key.

The options passed to WindowList are separated by commas and can be Geometry / NoGeometry / NoGeometryWithInfo, NoDeskNum, NoLayer, NoNumInDeskTitle, NoCurrentDeskTitle, MaxLabelWidth width, TitleForAllDesks, Function funcname, Desk desknum, CurrentDesk, NoIcons / Icons / OnlyIcons, NoNormal / Normal / OnlyNormal, NoSticky / Sticky / OnlySticky, NoStickyAcrossPages / StickyAcrossPages / OnlyStickyAcrossPages, NoStickyAcrossDesks / StickyAcrossDesks / OnlyStickyAcrossDesks, NoOnTop / OnTop / OnlyOnTop, NoOnBottom / OnBottom / OnlyOnBottom, Layer m [n], UseSkipList / OnlySkipList, NoDeskSort, ReverseOrder, CurrentAtEnd, IconifiedAtEnd, UseIconName, Alphabetic / NotAlphabetic, SortByResource, SortByClass, NoHotkeys, SelectOnRelease.

(Note - normal means not iconic, sticky, or on top)

With the SortByResource option windows are alphabetically sorted first by resource class, then by resource name and then by window name (or icon name if UseIconName is specified). ReverseOrder also works in the expected manner.

With the SortByClass option windows are sorted just like with SortByResource, but the resource name is not taken into account, only the resource class.

The SelectOnRelease option works exactly like the MenuStyle option with the same name, but overrides the option given in a menu style. By default, this option is set to the left Alt key. To switch it off, use SelectOnRelease without a key name.

If you pass in a function via Function funcname, it is called within a window context of the selected window:

AddToFunc IFunc I Iconify toggle
WindowList Function IFunc, NoSticky, CurrentDesk, NoIcons

If you use the Layer m [n] option, only windows in layers between m and n are displayed. n defaults to m. With the ReverseOrder option the order of the windows in the list is reversed.

With the CurrentAtEnd option the currently focused window (if any) is shown at the bottom of the list. This is mostly intended for simulating the Alt-Tab behavior in another GUI.

IconifiedAtEnd makes iconified windows be moved to the end of the list. This is also from another GUI.

The NoGeometry option causes fvwm to not display the geometries as well as the separators which indicate the different desktops. NoGeometryWithInfo removes the geometries, but keep the desktop information and indicates iconic windows. NoDeskNum causes fvwm to not display the desktop number in the geometry or before the window title with the NoGeometryWithInfo option. NoNumInDeskTitle is only useful if a desktop name is defined with the DesktopName command. It causes fvwm to not display the desktop number before the desktop name. By default, the WindowList menu have a title which indicates the current desk or the selected desktop if the Desk condition is used. The NoCurrentDeskTitle option removes this title. TitleForAllDesks causes fvwm to add a menu title with the desk name and/or number before each group of windows on the same desk. With NoLayer, the layer of the window is not displayed. The options ShowPage, ShowPageX and ShowPageY enable displaying the page of the window rounded multiples of the display size. With ShowScreen, the window's Xinerama screen number is displayed.

The MaxLabelWidth option takes the number of characters to print as its argument. No more than that many characters of the window name are visible.

If you wanted to use the WindowList as an icon manager, you could invoke the following:

WindowList OnlyIcons, Sticky, OnTop, Geometry

(Note - the Only options essentially wipe out all other ones... but the OnlyListSkip option which just causes WindowList to only consider the windows with WindowListSkip style.)

As a special case, default puts the window in its default layer, i.e. the layer it was initially in. The same happens if no or invalid arguments are specified.

If the literal option screen followed by a screen argument is specified, the coordinates are interpreted as relative to the given screen. The width and height of the screen are used for the calculations instead of the display dimensions. The screen as interpreted as in the MoveToScreen command. If the optional argument Warp is specified the pointer is warped with the window. If the single argument pointer is given, the top left corner of the window is moved to the pointer position before starting the operation; this is mainly intended for internal use by modules like FvwmPager. If the optional argument ewmhiwa is given, then the window position will ignore the working area (such as ignoring any values set via EwmhBaseStruts).

The operation can be aborted with Escape or any mouse button not set to place the window. By default mouse button 2 is set to cancel the move operation. To change this you may use the Mouse command with special context 'P' for Placement.

The window condition PlacedByButton can be used to check if a specific button was pressed to place the window (see Current command).

If the optional arguments x and y are provided, then the window is moved immediately without user interaction. Each argument can specify an absolute or relative position from either the left/top or right/bottom of the screen. By default, the numeric value given is interpreted as a percentage of the screen width/height, but a trailing 'p' changes the interpretation to mean pixels, while a trailing 'w' means precent of the window width/height. To move the window relative to its current position, add the 'w' (for "window") prefix before the x and/or y value. To move the window to a position relative to the current location of the pointer, add the 'm' (for "mouse") prefix. To leave either coordinate unchanged, "keep" can be specified in place of x or y.

For advanced uses, the arguments x and y can be used multiple times, but without the prefix 'm' or 'w'. (See complex examples below).

Simple Examples:

# Interactive move
Mouse 1 T A Move
# Move window to top left is at (10%,10%)
Mouse 2 T A Move 10 10
# Move top left to (10pixels,10pixels)
Mouse 3 T A Move 10p 10p

More complex examples (these can be bound as actions to keystrokes, etc.; only the command is shown, though):

# Move window so bottom right is at bottom
# right of screen
Move -0 -0
# Move window so top left corner is 10 pixels
# off the top left screen edge
Move +-10 +-10
# Move window 5% to the right, and to the
# middle vertically
Move w+5 50
# Move window up 10 pixels, and so left edge
# is at x=40 pixels
Move 40p w-10p
# Move window to the mouse pointer location
Move m+0 m+0
# Move window to center of screen (50% of screen
# poition minus 50% of widow size).
Move 50-50w 50-50w

Note: In order to obtain moving windows which do not snap to screen, with interactive move, hold down Alt whilst moving the window to disable snap attraction if it's defined.

See also the AnimatedMove command.

Previous versions of fvwm hardwired pixels to 3, which is now the default value. If pixels is negative or omitted the default value (which might be increased when 16000x9000 pixel displays become affordable) is restored.

Windows are usually not moved beyond desk boundaries.

Possible options are wrapx and wrapy to wrap around the x or y coordinate when the window is moved beyond the border of the desktop. For example, with wrapx, when the window moves past the right edge of the desktop, it reappears on the left edge. The options nodesklimitx and nodesklimity allow moving windows beyond the desk boundaries in x and y direction (disabling the wrapx and wrapy options).

Examples:

# Move window to page (2,3)
MoveToPage 2 3
# Move window to lowest and rightmost page
MoveToPage -1 -1
# Move window to last page visited
MoveToPage prev
# Move window two pages to the right and one
# page up, wrap at desk boundaries
MoveToPage wrapx wrapy +2p -1p

OpaqueMoveSize 0

all windows are moved using the traditional rubber-band outline. With

OpaqueMoveSize unlimited

or if a negative percentage is given all windows are moved as solid windows. The default is

OpaqueMoveSize 5

which allows small windows to be moved in an opaque manner but large windows are moved as rubber-bands. If percentage is omitted or invalid the default value is set. To resize windows in an opaque manner you can use the ResizeOpaque style. See the Style command.

AddToFunc raise-to-top


 + I Layer 0 ontop


 + I Raise

where ontop is the highest layer used in your setup.

The operation can be aborted with Escape or by pressing any mouse button (except button 1 which confirms it).

If the optional arguments width and height are provided, then the window is resized so that its dimensions are width by height. The units of width and height are percent-of-screen, unless a letter 'p' is appended to one or both coordinates, in which case the location is specified in pixels. With a 'c' suffix the unit defined by the client application (hence the c) is used. With the suffix 'wa' the value is a percentage of the width or height size of the EWMH working area, and with the suffix 'da' it is a percentage of the width or height of the EWMH dynamic working area. So you can say

Resize 80c 24c

to make a terminal window just big enough for 80x24 characters.

If the width or height is prefixed with the letter 'w' the size is not taken as an absolute value but added to the current size of the window. Example:

# Enlarge window by one line
Resize keep w+1c

Both, width and height can be negative. In this case the new size is the screen size minus the given value. If either value is "keep", the corresponding dimension of the window is left untouched. The new size is the size of the client window, thus

Resize 100 100

may make the window bigger than the screen. To base the new size on the size of the whole fvwm window, add the frame option after the command. The options fixeddirection, direction and warptoborder are only used in interactive move operations. With fixeddirection the same border is moved even if the pointer moves past the opposite border. The direction option must be followed by a direction name such as "NorthWest", "South" or "East" (you get the idea). Resizing is started immediately, even if the pointer is not on a border. If the special option automatic is given as a direction argument, then the direction to resize is calculated based on the position of the pointer in the window. If the pointer is in the middle of the window, then no direction is calculated. The warptoborder option can be used to warp the pointer to the direction indicated. As with the automatic option for direction, the border to warp to is calculated based on the pointer's proximity to a given border. Also, if resizing is started by clicking on the window border, the pointer is warped to the outer edge of the border.

AddToFunc ResizeSE I Resize Direction SE
Mouse 3 A M ResizeSE

Examples:

# Move window to top left corner and cover
# most of the screen
ResizeMove -10p -20p 0 0
# Grow the focused window towards the top of screen
Current Resize keep w+$[w.y]p keep 0

Note: Fvwm may not be able to parse the command properly if the option bottomright of the Resize command is used.

SetAnimation 10 -.01 0 .01 .03 .08 .18 .3 \


  .45 .6 .75 .85 .90 .94 .97 .99 1.0

Sets the delay between frames to 10 milliseconds, and sets the positions of the 16 frames of the animation motion. Negative values are allowed, and in particular can be used to make the motion appear more cartoonish, by briefly moving slightly in the opposite direction of the main motion. The above settings are the default.

This command has been removed and must be replaced by MoveToDesk, the arguments for which are the same as for the GotoDesk command.

Important

You cannot simply change the name of the command: the syntax has changed. If you used:

WindowsDesk n

to move a window to desk n, you have to change it to:

MoveToDesk 0 n

CursorMove 100 100

means to move down and right by one full page.

CursorMove 50 25

means to move right half a page and down a quarter of a page. Alternatively, the distance can be specified in pixels by appending a 'p' to the horizontal and/or vertical specification. For example

CursorMove -10p -10p

means move ten pixels up and ten pixels left. The CursorMove function should not be called from pop-up menus.

When the NoWarp argument is given, Focus cannot transfer the keyboard focus to windows on other desks.

To raise and/or warp a pointer to a window together with Focus or FlipFocus, use a function, like:

AddToFunc SelectWindow
+ I Focus
+ I Iconify false
+ I Raise
+ I WarpToWindow 50 8p

There are a number of Style options which influence the appearance and behavior of icons (e.g. StickyIcon, NoIcon).

For backward compatibility, the optional argument may also be a positive number instead of "True", or a negative number instead of "False". Note that this syntax is obsolete, and will be removed in the future.

With just the parameter "forget" a maximized window reverts back into normal state but keeps its current maximized size. This can be useful in conjunction with the commands ResizeMaximize and ResizeMoveMaximize. If the window is not maximized, nothing happens.

With the optional arguments horizontal and vertical, which are expressed as percentage of a full screen, the user can control the new size of the window. An optional suffix 'p' can be used to indicate pixels instead of percents of the screen size. If horizontal is greater than 0 then the horizontal dimension of the window is set to horizontal*screen_width/100. If the value is smaller than 0 the size is subtracted from the screen width, i.e. -25 is the same as 75. If horizontal is "grow", it is maximized to current available space until finding any obstacle. The vertical resizing is similar. If both horizontal and vertical values are "grow", it expands vertically first, then horizontally to find space. Instead of the horizontal "grow" argument, "growleft" or "growright" can be used respectively "growup" and "growdown". The optional flags argument is a space separated list containing the following key words: fullscreen, ewmhiwa, growonwindowlayer, growonlayers and screen. fullscreen causes the window to become fullscreened if the appropriate EWMH hint is set. ewmhiwa causes fvwm to ignore the EWMH working area. growonwindowlayer causes the various grow methods to ignore windows with a layer other than the current layer of the window which is maximized. The growonlayers option must have two integer arguments. The first one is the minimum layer and the second one the maximum layer to use. Windows that are outside of this range of layers are ignored by the grow methods. A negative value as the first or second argument means to assume no minimum or maximum layer. screen must have an argument which specifies the Xinerama screen on which to operate. It can be 'p' for the primary screen, 'c' for the current screen (containing the mouse pointer), 'g' for the global screen or the screen number itself (counting from zero). This option is only useful with multiple Xinerama screens.

Here are some examples. The following adds a title-bar button to switch a window to the full vertical size of the screen:

Mouse 0 4 A Maximize 0 100

The following causes windows to be stretched to the full width:

Mouse 0 4 A Maximize 100 0

This makes a window that is half the screen size in each direction:

Mouse 0 4 A Maximize 50 50

To expand a window horizontally until any other window is found:

Mouse 0 4 A Maximize 0 grow

To expand a window until any other window on the same or a higher layer is hit.

Mouse 0 4 A Maximize growonlayers $[w.layer] -1 grow grow

To expand a window but leave the lower 60 pixels of the screen unoccupied:

Mouse 0 4 A Maximize 100 -60p

Values larger than 100 can be used with caution.

Causes fvwm to recapture all of its windows. This ensures that the latest style parameters are used. The recapture operation is visually disturbing.

Since fvwm version 2.4 only a very few Style options need a Recapture to take effect (e.g. UseStyle).

Causes fvwm to recapture the chosen window.

Style * WindowShadeShrinks, WindowShadeSteps 20, \


        WindowShadeLazy
Mouse 1 - S WindowShade North
Mouse 1 [ S WindowShade West
Mouse 1 ] S WindowShade E
Mouse 1 _ S WindowShade S

Note: When a window that has been shaded with a direction argument changes the direction of the window title (see TitleAtTop Style option), the shading direction does not change. This may look very strange. Windows that were shaded without a direction argument stay shaded in the direction of the title bar.

For backward compatibility, the optional argument may also be 1 to signify "on", and 2 to signify "off". Note that this syntax is obsolete, and will be removed in the future.

Modifiers has the same syntax as in the Mouse or Key bindings, with the addition of 'L' meaning the caps lock key. The default is "L". Modifiers can be omitted, meaning no modifiers are ignored. This command comes in handy if the num-lock and scroll-lock keys interfere with your shortcuts. With XFree86 '2' usually is the num-lock modifier and '5' refers to the scroll-lock key. To turn all these pesky modifiers off you can use this command:

IgnoreModifiers L25

If the Modifiers argument is the string "default", fvwm reverts back to the default value "L".

Important
This command creates a lot of extra network traffic, depending on your CPU, network connection, the number of Key or Mouse commands in your configuration file and the number of modifiers you want to ignore. If you do not have a lightning fast machine or very few bindings you should not ignore more than two modifiers. I.e. do not ignore scroll-lock if you have no problem with it. In the FAQ you can find a better solution of this problem.

Function is executed when the mouse pointer enters the invisible pan frames that surround the visible screen. The binding works only if EdgeThickness is set to a value greater than 0. If a function is bound to an edge, scrolling specified by EdgeScroll is disabled for this edge. It is possible to bind a function only to some edges and use the other edges for scrolling. This command is intended to raise or lower certain windows when the mouse pointer enters an edge. FvwmAuto can be used get a delay when raising or lowering windows. The following example raises FvwmButtons if the mouse pointer enters the top edge of the screen.

# Disable EdgeScrolling but make it possible
# to move windows over the screen edge
EdgeResistance -1
Style * EdgeMoveDelay 250
Style * EdgeMoveResistance 20
# Set thickness of the edge of the screen to 1
EdgeThickness 1
# Give focus to FvwmButtons if the mouse
# hits top edge
EdgeCommand Top Next (FvwmButtons) Focus
# Make sure the Next command matches the window
Style FvwmButtons CirculateHit
Module FvwmButtons
Module FvwmAuto 100 "Silent AutoRaiseFunction" \


     "Silent AutoLowerFunction"
# If any window except FvwmButtons has
# focus when calling this function
# FvwmButtons are lowered
DestroyFunc AutoLowerFunction
AddToFunc AutoLowerFunction
+ I Current (!FvwmButtons) All (FvwmButtons) Lower
# If FvwmButtons has focus when calling this function raise it
DestroyFunc AutoRaiseFunction
AddToFunc AutoRaiseFunction
+ I Current (FvwmButtons) Raise

Normally, the invisible pan frames are only on the screen edges that border virtual pages. If a screen edge has a command bound to it, the pan frame is always created on that edge.

Function is executed when the mouse pointer leaves the invisible pan frames that surround the visible screen. The binding works only if EdgeThickness is set to a value greater than 0. If a function is bound to an edge, scrolling specified by EdgeScroll is disabled for this edge. It is possible to bind a function only to some edges and use the other edges for scrolling. This command is intended to raise or lower certain windows when the mouse pointer leaves an edge. FvwmAuto can be used get a delay when raising or lowering windows. See example for EdgeCommand

Normally, the invisible pan frames are only on the screen edges that border virtual pages. If a screen edge has a command bound to it, the pan frame is always created on that edge.

The special context 'M' for menus can be used to (re)define the menu controls. It be used alone or together with 'T', 'S', 'I', '[', ']', '-' and '_'. See the Menu Bindings section for details.

The following example binds the built-in window list to pop up when Alt-Ctrl-Shift-F11 is hit, no matter where the mouse pointer is:

Key F11 A SCM WindowList

Binding a key to a title-bar button causes that button to appear. Please refer to the Mouse command for details.

Context describes where the binding applies. Valid contexts are 'R' for the root window, 'W' for an application window, 'D' for a desktop application (as kdesktop or Nautilus desktop), 'T' for a window title-bar, 'S' for a window side, top, or bottom bar, '[', ']', '-' and '_' for the left, right, top or bottom side only, 'F' for a window frame (the corners), '<', '^', '>' and 'v' for the top left, top right, bottom right or bottom left corner, 'I' for an icon window, or '0' through '9' for title-bar buttons, or any combination of these letters. 'A' is for any context. For instance, a context of "FST" applies when the mouse is anywhere in a window's border except the title-bar buttons. Only 'S' and 'W' are valid for an undecorated window.

The special context 'M' for menus can be used to (re)define the menu controls. It can be used alone or together with 'T', 'S', 'I', '[', ']', '-' and '_'. See the Menu Bindings section for details.

The special context 'P' controls what buttons that can be used to place a window. When using this context no modifiers are allowed (Modifiers must be N), no window is allowed, and the Function must be one of PlaceWindow, PlaceWindowDrag, PlaceWindowInteractive, CancelPlacement, CancelPlacementDrag, CancelPlacementInteractive or -.

PlaceWindow makes Button usable for window placement, both for interactive and drag move. CancelPlacement does the inverse. That is makes Button to cancel move for both interactive and drag move. It may however not override how new windows are resized after being placed. This is controlled by the Emulate command. Also a window being dragged can always be placed by releasing the button hold while dragging, regardless of if it is set to PlaceWindow or not.

PlaceWindowDrag and PlaceWindowInteractive/CancelPlacementDrag and CancelPlacementInteractive work as PlaceWindow/CancelPlacement with the exception that they only affect either windows dragged / placed interactively.

- is equivalent to CancelPlacement.

The following example makes all buttons but button 3 usable for interactive placement and makes drag moves started by other buttons than one cancel if button 1 is pressed before finishing the move:

Mouse 0 P N PlaceWindow
Mouse 3 P N CancelPlacement
Mouse 1 P N CancelPlacementDrag

By default, the binding applies to all windows. You can specify that a binding only applies to specific windows by specifying the window name in brackets. The window name is a wildcard pattern specifying the class, resource or name of the window you want the binding to apply to.

The following example shows how the same key-binding can be used to perform different functions depending on the window that is focused:

Key (rxvt)  V A C Echo ctrl-V-in-RXVT
Key (*term) V A C Echo ctrl-V-in-Term
Key (*vim)  V A C --
Key         V A C Echo ctrl-V-elsewhere

A '--' action indicates that the event should be propagated to the specified window to handle. This is only a valid action for window-specific bindings.

This example shows how to display the WindowList when Button 3 is pressed on an rxvt window:

Mouse (rxvt) 3 A A WindowList

Note that Fvwm actually intercepts all events for a window-specific binding and (if the focused window doesn't match any of the bindings) sends a synthetic copy of the event to the window. This should be transparent to most applications, however (for security reasons) some programs ignore these synthetic events by default - xterm is one of them. To enable handling of these events, add the following line to your ~/.Xdefaults file:

XTerm*allowSendEvents:  true

Modifiers is any combination of 'N' for no modifiers, 'C' for control, 'S' for shift, 'M' for Meta, 'L' for Caps-Lock or 'A' for any modifier. For example, a modifier of "SM" applies when both the Meta and Shift keys are down. X11 modifiers mod1 through mod5 are represented as the digits '1' through '5'. The modifier 'L' is ignored by default. To turn it on, use the IgnoreModifiers command.

Function is one of fvwm's commands.

The title-bar buttons are numbered with odd numbered buttons on the left side of the title-bar and even numbers on the right. Smaller-numbered buttons are displayed toward the outside of the window while larger-numbered buttons appear toward the middle of the window (0 is short for 10). In summary, the buttons are numbered:

1 3 5 7 9    0 8 6 4 2

The highest odd numbered button which has an action bound to it determines the number of buttons drawn on the left side of the title bar. The highest even number determines the number of right side buttons which are drawn. Actions can be bound to either mouse buttons or keyboard keys.

Example:

Style * SloppyFocus
PointerKey f1 a m Menu MainMenu

Strokes sequences are defined in a telephone grid like this:

 1  2  3


 4  5  6


 7  8  9

or in a numeric pad grid like this:

 7  8  9


 4  5  6


 1  2  3

The telephone grid is used by default, to use the numeric pad grid you should begin the sequence with a 'N'. Note that a complex motion may produce several different sequences (see the "netscape" example below to handle such motion). Moreover, sequences are limited to 20 elements (with the present version of libstroke), however, in practice it is preferable to use sequence with less than 12 elements.

Because of the default button menu in fvwm, you may need to remove a mouse button binding (using an empty action) before using the stroke

Mouse 3 R N

Also, you can still use the stroke "sequence 0" to simulate a click:

Stroke 0 3 R N Menu WindowList Nop

The following example starts xterm when the mouse drags an 'I' on the root window with button 3 pressed down:

Stroke 258  3  R  N  Exec exec xterm

An example for Netscape:

Stroke 7415963    3  R  N  Exec exec netscape
Stroke 74148963   3  R  N  Exec exec netscape
Stroke 74158963   3  R  N  Exec exec netscape
Stroke 7418963    3  R  N  Exec exec netscape
Stroke 415963     3  R  N  Exec exec netscape

You may prefer to use the numeric pad grid since you have such a grid on your machine. Here an example:

Stroke N78963214   3  R  N FvwmForm FvwmForm-QuitVerify
Stroke N789632147  3  R  N FvwmForm FvwmForm-QuitVerify

This example starts the "QuitVerify" form if you draw a box that begins in the top left corner.

Note: You need libstroke installed and fvwm compiled with stroke support. libstroke can be obtained at http://www.etla.net/~willey/projects/libstroke/

Stroke sequence 0 Context Modifiers action

and executes the corresponding action (Note the 0). Normal use of this function is via a Mouse or Key command. Examples:

Mouse 3 A M StrokeFunc
Key x R N StrokeFunc

If you press mouse button 3 and Alt anywhere (respectively, press the key x when the cursor is on the root window), then fvwm records the mouse motions until the mouse button 3 (respectively, the x key) is released and then check if the recorded sequence corresponds to a stroke binding of the form

"Stroke sequence 0 A M action"
"Stroke sequence 0 R N action"

Note that the Context and Modifiers are taken at the beginning of the execution of the StrokeFunc command (so you can release the modifiers before the end of the stroke recording in the case of a mouse binding and if you used, say, a title-bar context the mouse motion can go through an application window). The keys Escape and Delete allow you to abort the command.

The StrokeFunc command has five options: NotStayPressed, EchoSequence, DrawMotion, FeedBack and StrokeWidth. These options are disabled by default. EchoSequence causes fvwm to Echo the recorded stroke sequence. DrawMotion causes fvwm to draw the mouse motion on the screen. FeedBack causes fvwm to display during a fraction of second the cursor of the WAIT context of the CursorStyle command if the recorded stroke sequence corresponds to a stroke binding. StrokeWidth takes an integer argument, which must be >= 0 and <= 100 and which defines the width of the line for the DrawMotion option.

NotStayPressed works only if StrokeFunc is used via a Mouse or a Key command. This option removes the need to have a button or the key pressed during the stroke, but you have to do a mouse click or press the Return or Space key to finish the mouse motion recording (these keys also work without the NotStayPressed option).

You can use the StrokeFunc "alone". In this case it works as above with the NotStayPressed option enabled. However, Modifiers, in general, may not work as expected (i.e., in this case use 'A' or 'N' as Modifiers in the stroke bindings).

Note that some computers do not support key release events. If that is the case the StrokeFunc used via a Key command works as if the NotStayPressed option is enabled.

FocusStyle * EnterToFocus, !LeaveToUnfocus

is equivalent to

Style * FPEnterToFocus, !FPLeaveToUnfocus

Destroying style "*" can be done, but isn't really to be recommended. For example:

DestroyStyle Application*

This removes all settings for the style named "Application*", NOT all styles starting with "Application".

stylename can be a window's name, class, visible name, or resource string. It may contain the wildcards '*' and '?', which are matched in the usual Unix filename manner. Multiple style options in a single Style command are read from left to right as if they were issued one after each other in separate commands. A given style always overrides all conflicting styles that have been issued earlier (or further left on the same style line).

Note: windows that have no name (WM_NAME) are given a name of "Untitled", and windows that do not have a class (WM_CLASS, res_class) are given class "NoClass" and those that do not have a resource (WM_CLASS, res_name) are given resource "NoResource".

If a window has the resource "fvwmstyle" set, the value of that resource is used in addition to any window names when selecting the style.

options is a comma separated list containing one or more of the following keywords. Each group of style names is separated by slashes ('/'). The last style in these groups is the default. BorderWidth, HandleWidth, !Icon / Icon, MiniIcon, IconBox, IconGrid, IconFill, IconSize, !Title / Title, TitleAtBottom / TitleAtLeft / TitleAtRight / TitleAtTop, LeftTitleRotatedCW / LeftTitleRotatedCCW, RightTitleRotatedCCW / RightTitleRotatedCW, TopTitleRotated / TopTitleNotRotated, BottomTitleRotated / BottomTitleNotRotated, !UseTitleDecorRotation / UseTitleDecorRotation, StippledTitle / !StippledTitle, StippledIconTitle / !StippledIconTitle, IndexedWindowName / ExactWindowName, IndexedIconName / ExactIconName, TitleFormat / IconTitleFormat / !Borders / Borders, !Handles / Handles, WindowListSkip / WindowListHit, CirculateSkip / CirculateHit, CirculateSkipShaded / CirculateHitShaded, CirculateSkipIcon / CirculateHitIcon, Layer, StaysOnTop / StaysOnBottom / StaysPut, Sticky / Slippery, StickyAcrossPages / !StickyAcrossPages, StickyAcrossDesks / !StickyAcrossDesks, !StickyStippledTitle / StickyStippledTitle, !StickyStippledIconTitle / StickyStippledIconTitle, StartIconic / StartNormal, Color, ForeColor, BackColor, Colorset, HilightFore, HilightBack, HilightColorset, BorderColorset, HilightBorderColorset, IconTitleColorset, HilightIconTitleColorset, IconBackgroundColorset, IconTitleRelief, IconBackgroundRelief, IconBackgroundPadding, Font, IconFont, StartsOnDesk / StartsOnPage / StartsAnyWhere, StartsOnScreen, StartShaded / !StartShaded, ManualPlacementHonorsStartsOnPage / ManualPlacementIgnoresStartsOnPage, CaptureHonorsStartsOnPage / CaptureIgnoresStartsOnPage, RecaptureHonorsStartsOnPage / RecaptureIgnoresStartsOnPage, StartsOnPageIncludesTransients / StartsOnPageIgnoresTransients, IconTitle / !IconTitle, MwmButtons / FvwmButtons, MwmBorder / FvwmBorder, MwmDecor / !MwmDecor, MwmFunctions / !MwmFunctions, HintOverride / !HintOverride, !Button / Button, ResizeHintOverride / !ResizeHintOverride, OLDecor / !OLDecor, GNOMEUseHints / GNOMEIgnoreHints, StickyIcon / SlipperyIcon, StickyAcrossPagesIcon / !StickyAcrossPagesIcon, StickyAcrossDesksIcon / !StickyAcrossDesksIcon, ManualPlacement / CascadePlacement / MinOverlapPlacement / MinOverlapPercentPlacement / TileManualPlacement / TileCascadePlacement / PositionPlacement, MinOverlapPlacementPenalties, MinOverlapPercentPlacementPenalties, DecorateTransient / NakedTransient, DontRaiseTransient / RaiseTransient, DontLowerTransient / LowerTransient, DontStackTransientParent / StackTransientParent, SkipMapping / ShowMapping, ScatterWindowGroups / KeepWindowGroupsOnDesk, UseDecor, UseStyle, !UsePPosition / NoPPosition / UsePPosition, !UseUSPosition, NoUSPosition / UseUSPosition, !UseTransientPPosition, NoTransientPPosition / UseTransientPPosition, !UseTransientUSPosition / NoTransientUSPosition / UseTransientUSPosition, !UseIconPosition / NoIconPosition / UseIconPosition, Lenience / !Lenience, ClickToFocus / SloppyFocus / MouseFocus|FocusFollowsMouse / NeverFocus, ClickToFocusPassesClickOff / ClickToFocusPassesClick, ClickToFocusRaisesOff / ClickToFocusRaises, MouseFocusClickRaises / MouseFocusClickRaisesOff, GrabFocus / GrabFocusOff, GrabFocusTransientOff / GrabFocusTransient, FPFocusClickButtons, FPFocusClickModifiers, !FPSortWindowlistByFocus / FPSortWindowlistByFocus, FPClickRaisesFocused / !FPClickRaisesFocused, FPClickDecorRaisesFocused / !FPClickDecorRaisesFocused, FPClickIconRaisesFocused / !FPClickIconRaisesFocused, !FPClickRaisesUnfocused / FPClickRaisesUnfocused, FPClickDecorRaisesUnfocused / !FPClickDecorRaisesUnfocused, FPClickIconRaisesUnfocused / !FPClickIconRaisesUnfocused, FPClickToFocus / !FPClickToFocus, FPClickDecorToFocus / !FPClickDecorToFocus, FPClickIconToFocus / !FPClickIconToFocus, !FPEnterToFocus / FPEnterToFocus, !FPLeaveToUnfocus / FPLeaveToUnfocus, !FPFocusByProgram / FPFocusByProgram, !FPFocusByFunction / FPFocusByFunction, FPFocusByFunctionWarpPointer / !FPFocusByFunctionWarpPointer, FPLenient / !FPLenient, !FPPassFocusClick / FPPassFocusClick, !FPPassRaiseClick / FPPassRaiseClick, FPIgnoreFocusClickMotion / !FPIgnoreFocusClickMotion, FPIgnoreRaiseClickMotion / !FPIgnoreRaiseClickMotion, !FPAllowFocusClickFunction / FPAllowFocusClickFunction, !FPAllowRaiseClickFunction / FPAllowRaiseClickFunction, FPGrabFocus / !FPGrabFocus, !FPGrabFocusTransient / FPGrabFocusTransient, FPOverrideGrabFocus / !FPOverrideGrabFocus, FPReleaseFocus / !FPReleaseFocus, !FPReleaseFocusTransient / FPReleaseFocusTransient, FPOverrideReleaseFocus / !FPOverrideReleaseFocus, StartsLowered / StartsRaised, IgnoreRestack / AllowRestack, FixedPosition / VariablePosition, FixedUSPosition / VariableUSPosition, FixedPPosition / VariablePPosition, FixedSize / VariableSize, FixedUSSize / VariableUSSize, FixedPSize / VariablePSize, !Closable / Closable, !Iconifiable / Iconifiable, !Maximizable / Maximizable, !AllowMaximizeFixedSize / AllowMaximizeFixedSize, IconOverride / NoIconOverride / NoActiveIconOverride, DepressableBorder / FirmBorder, MinWindowSize, MaxWindowSize, IconifyWindowGroups / IconifyWindowGroupsOff, ResizeOpaque / ResizeOutline, BackingStore / BackingStoreOff / BackingStoreWindowDefault, Opacity / ParentalRelativity, SaveUnder / SaveUnderOff, WindowShadeShrinks / WindowShadeScrolls, WindowShadeSteps, WindowShadeAlwaysLazy / WindowShadeBusy / WindowShadeLazy, EWMHDonateIcon / EWMHDontDonateIcon, EWMHDonateMiniIcon / EWMHDontDonateMiniIcon, EWMHMiniIconOverride / EWMHNoMiniIconOverride, EWMHUseStackingOrderHints / EWMHIgnoreStackingOrderHints, EWMHIgnoreStateHints / EWMHUseStateHints, EWMHIgnoreStrutHints / EWMHUseStrutHints, EWMHIgnoreWindowType / !EWMHIgnoreWindowType, EWMHMaximizeIgnoreWorkingArea / EWMHMaximizeUseWorkingArea / EWMHMaximizeUseDynamicWorkingArea, EWMHPlacementIgnoreWorkingArea / EWMHPlacementUseWorkingArea / EWMHPlacementUseDynamicWorkingArea, MoveByProgramMethod, Unmanaged, State, SnapGrid, SnapAttraction, EdgeMoveDelay, EdgeResizeDelay. EdgeMoveResistance, InitialMapCommand

In the above list some options are listed as style-option/opposite-style-option. The opposite-style-option for entries that have them describes the fvwm default behavior and can be used if you want to change the fvwm default behavior.

Focus policy

Focusing the window

Window title

name (i)

TitleFormat %n (%t)

    TitleFormat %n

IconTitleFormat %n (%t)
IconTitleFormat %n

    TitleFormat " %n " -> [%t] ->      [%c]

    TitleFormat %z

Title buttons

Borders

Icons, shading, maximizing, movement, resizing

Style * Icon unknown.xpm

Style ** Icon unknown.xpm

Style * NoIcon
Style FvwmPager Icon

IconBox [screen scr-spec] l t r b

IconBox geometry

IconBox -80 240 -1 -1

IconBox 1000x70-1-1

Style * IconBox -80 240 -1 -1, \


        IconBox 1000x70-1-1

AddToFunc DeiconifyAndRearrange


 + C Iconify off


 + C All (CurrentPage, Iconic) PlaceAgain Icon

AddToFunc IconFunc


 + C Iconify off


 + M Raise


 + M Move


 + D Iconify off
Mouse 1 I A Iconify off

AddToFunc IconFunc


 + C DeiconifyAndRearrange


 + M Raise


 + M Move


 + D DeiconifyAndRearrange
Mouse 1 I A DeiconifyAndRearrange

IconGrid x y

Style * IconBox -80x240-1-1, IconGrid 90 90

IconFill Bottom Right

IconFill left top

Style * IconBox -80x240-1-1, IconFill b r

IconSize [ width height [ maxwidth maxheight ] ]

MiniIcon specifies a pixmap to use as the miniature icon for the window. This miniature icon can be drawn in a title-bar button (see ButtonStyle), and can be used by various fvwm modules (FvwmIconMan and FvwmPager). It takes the name of a pixmap as an argument.

WindowShadeShrinks and WindowShadeScrolls control if the contents of a window that is being shaded with the WindowShade command are scrolled (default) or if they stay in place. The shrinking mode is a bit faster

The WindowShadeSteps option selects the number of steps for animation when shading a window with WindowShade. It takes one number as its argument. If the number has a trailing 'p' it sets the number of pixels to use as the step size instead of a fixed number of steps. 0 disables the animation. This happens too if the argument is omitted or invalid.

The WindowShade command has two modes of operation: busy and lazy shading. Busy shading can be 50% slower than lazy shading, but the latter can look strange under some conditions, for example, if the window borders, buttons or the title are filled with a tiled pixmap. Also, the window handles are not drawn in lazy mode and the border relief may only be drawn partially right before the window reaches the shaded state or tight after leaves the unshaded state. By default, fvwm uses lazy mode if there are no bad visual effects (not counting the window handles) and busy mode otherwise. Use the WindowShadeAlwaysLazy or WindowShadeBusy to force using the lazy or busy mode. The default setting is restored with WindowShadeLazy.

ResizeOpaque instructs fvwm to resize the corresponding windows with their contents visible instead of using an outline. Since this causes the application to redraw frequently it can be quite slow and make the window flicker excessively, depending on the amount of graphics the application redraws. The ResizeOutline style (default) negates the ResizeOpaque style. Many applications do not like their windows being resized opaque, e.g. XEmacs, Netscape or terminals with a pixmap background. If you do not like the result, do not use the ResizeOpaque style for these windows. To exempt certain windows from opaque resizing you could use these lines in your configuration file:

Style * ResizeOpaque
Style rxvt ResizeOutline
Style emacs ResizeOutline

Sticky makes the window sticky, i.e. it is always visible on each page and each desk. The opposite style, Slippery reverts back to the default.

StickyIcon makes the window sticky when it's iconified. It de-iconifies on top the active desktop. SlipperyIcon reverts back to the default.

StickyAcrossPages and StickyAcrossPagesIcon work like Sticky and StickyIcon, but stick the window only across pages, not desks while StickyAcrossDesks and StickyAcrossDesksIcon works the other way round.

Windows that have been marked as Sticky or StickyAcrossDesks or StickyAcrossPages will have stipples drawn on the titlebar. This can be negated with the !StickyStippledTitle style. The style StickyStippledTitle puts back the stipples where that window has also been marked as Sticky. Note that this is the default style for Sticky windows. Sticky icons will have stipples drawn on the icon title. This can be disabled in the same way with the !StickyStippledIconTitle style.

Windows with the StartIconic style are shown as icons initially. Note that some applications counteract that by deiconifying themselves. The default is to not iconify windows and can be set with the StartNormal style.

StickyIcon makes the window sticky when it's iconified. It de-iconifies on top the active desktop. SlipperyIcon reverts back to the default.

StickyIconPage works like StickyIcon, but sticks the icon only across pages, not desks while StickyIconDesk works the other way round.

StippledIconTitle works like StippledTitle in that it draws stipples on the titles of icons but doesn't make the icon sticky.

IgnoreRestack makes fvwm ignore attempts of clients to raise or lower their own windows. By default, the opposite style, AllowRestack is active.

FixedPosition and FixedUSPosition make fvwm ignore attempts of the user to move the window. It is still possible to move the window by resizing it. To allow the user to move windows, use the VariablePosition or VariableUSPosition style.

FixedSize and FixedUSSize make fvwm ignore attempts of the user to resize the window. To allow the user to resize windows, use the VariableSize or VariableUSSize style.

FixedPPosition and FixedPSize make fvwm ignore attempts of the program to move or resize its windows. To allow this kind of actions, use the VariablePPosition or VariablePSize style. These styles may sometimes affect the initial placement and dimensions of new windows (depending on the application). If windows are created at strange places, try either the VariablePPosition or !UsePPosition styles. The FixedPSize style may screw up window dimensions for some applications. Do Not use this style in this case.

MoveByProgramMethod affects how fvwm reacts to requests by the application to move its windows. By default, fvwm tries to detect which method to use, but it sometimes detects the wrong method. You may come across a window that travels across the screen by a few pixels when the application resizes it, moves to a screen border with the frame decorations off screen, that remembers its position for the next time it starts but appears in a slighly shifted position, or that attepmts to become full screen but has the. Try out both options, UseGravity and IgnoreGravity on the window (and that window only) and see if that helps. By default, fvwm uses the AutoDetect method. Once the method was detected, it is never changed again. As long as fvwm can not detect the proper method, it uses IgnoreGravity. To force fvwm to retry the detection, use one of the other two options first and then use AutoDetect again.

Note: This option was introduced to alleviate a problem with the ICCCM specification. The ICCCM clearly states that the UseGravity option should be used, but traditionally applications ignored this rule.

Closable enables the functions Close, Delete and Destroy to be performed on the windows. This is on by default. The opposite, !Closable, inhibits the window to be closed.

Iconifiable enables the function Iconify to be performed on the windows. This is on by default. The opposite, !Iconifiable, inhibits the window from being iconified.

Maximizable enables the function Maximize to be performed on the windows. This is on by default. The opposite, !Maximizable, inhibits the window from being maximized.

AllowMaximizeFixedSize enables the function Maximize to be performed on windows that are not resizable, unless maximization has been disabled either using the style !Maximizable or through WM hints. This is on by default. The opposite, !AllowMaximizeFixedSize, inhibits all windows that are not resizable from being maximized.

ResizeHintOverride instructs fvwm to ignore the program supplied minimum and maximum size as well as the resize step size (the character size in many applications). This can be handy for broken applications that refuse to be resized. Do not use it if you do not need it. The default (opposite) style is NoResizeOverride.

MinWindowSize [ width [ p ] height [ p ] ] Tells fvwm the minimum width and height of a window. The values are the percentage of the total screen area. If the letter 'p' is appended to either of the values, the numbers are interpreted as pixels. This command is useful for certain versions of xemacs which freak out if their windows become too small. If you omit he parameters or their values are invalid, both limits are set to 0 pixels (which is the default value).

MaxWindowSize [ width [ p ] height [ p ] ] Tells fvwm the maximum width and height of a window. The values are the percentage of the total screen area. If the letter 'p' is appended to either of the values, the numbers are interpreted as pixels. This command is useful to force large application windows to be fully visible. Neither height nor width may be less than 100 pixels. If you omit the parameters or their values are invalid, both limits are set to 32767 pixels (which is the default).

With IconifyWindowGroups all windows in the same window group are iconified and deiconified at once when any window in the group is (de)iconified. The default is IconifyWindowGroupsOff, which disables this behavior. Although a number of applications use the window group hint, it is rarely used in a proper way, so it is probably best to use IconifyWindowGroups only for selected applications.

The option SnapAttraction affects interactive window movement: If during an interactive move the window or icon comes within proximity pixels of another the window or icon, it is moved to make the borders adjoin. The default of 0 means that no snapping happens. Calling this command without arguments turns off snap attraction and restores the default behavior. Please refer also to the SnapGrid command.

The second argument determined is optional and may be set to one of the five following values: With All both icons and windows snap to other windows and other icons. SameType lets windows snap only to windows, and icons snap only to icons. With Windows windows snap only to other windows. Similarly with Icons icons snap only to other icons. With None no snapping takes place. This option can be useful in conjunction with the following argument if you only want to snap against the screen edges. The default behavior is All.

The third and last optional argument may be set to one of the four following values:

The option SnapGrid defines an invisible grid on the screen. During an interactive move a window or icon is positioned such that its location (top left corner) is coincident with the nearest grid point. The default x-grid-size and y-grid-size setting are both 1, which is effectively no grid all.

An interactive move with both SnapGrid and SnapAttraction results in the window being moved to be adjacent to the nearest window border (if within snap proximity) or grid position. The window moves the shortest distance possible to satisfy both SnapGrid and SnapAttraction. Note that the x and y coordinates are not coupled. For example, a window may snap to another window on the x axis while snapping to a grid point on the y axis. Using this style without arguments reinstates the default settings.

The styles EdgeMoveDelay and EdgeResizeDelay tells how hard it should be to change the desktop viewport by moving or resizing a window over the edge of the screen. The parameter tells how many milliseconds the pointer must spend on the screen edge before fvwm moves the viewport. The command EdgeScroll determines how far the viewport is scrolled. If -1 is given as the delay, page flipping is disabled completely. The defaults are no delay for moving (0) and no flipping for resizing (-1). Using these styles without any argument restores the default settings. Note that, with

EdgeScroll 0 0

it is still possible to move or resize windows across the edge of the current screen. See also EdgeThickness.

The option EdgeMoveResistance makes it easier to place a window directly adjacent to the screen's or xinerama screen's border. It takes one or two parameters. The first parameter tells how many pixels over the edge of the screen a window's edge must move before it actually moves partially off the screen. The optional second parameter does the same as the first, but for individual Xinerama screens. If omitted, the value of the first parameter is assumed for this type of movement. Set the second parameter to 0 to zero to ignore individual xinerama screen edges. Note that the center of the window being moved determines the xinerama screen on which the window should be kept. Both values are 0 by default. To restore the defaults, the option EdgeMoveResistance can be used without any parameters.

The option InitialMapCommand allows for any valid fvwm command or function to run when the window is initially mapped by fvwm. Example:

Style MyWindow StartsOnPage 0 0, InitialMapCommand Iconify

This would hence place the window called MyWindow on page 0 0 for the current desk, and immediately run the Iconify command on that window.

Note that should InitialMapCommand be used as a global option for all windows, but there is a need that some windows should not have this command applied, then an action of Nop can be used on those windows, as in the following example:

Style * InitialMapCommand Iconify
Style XTeddy InitialMapCommand Nop

PositionPlacement [Center|UnderMouse|move-arguments] When used without an argument, new windows are placed in the top left corner of the display. With the argument Center, all new window appear at the center of the screen, and with UnderMouse, windows are centered under the mouse pointer where possible. If the window is unable to fit on the screen because the pointer is at the edge of the screen, then the window is forced on-screen using this option. If any other move-arguments are given, they are interpreted exactly as the Move command does (with the exception that references to the current window position do not work as the window has not been placed yet).

CascadePlacement automatically place new windows in a cascading fashion.

TileCascadePlacement automatically places new windows in a smart location - a location in which they do not overlap any other windows on the screen. If no such position can be found CascadePlacement is used as a fall-back method.

TileManualPlacement This is the same as TileCascadePlacement, but uses ManualPlacement as the fall-back method.

MinOverlapPlacement automatically places new windows in a location in which the overlapping area in pixels of other windows is minimized. By default this placement policy tries to avoid overlapping icons and windows on higher layers. This can be configured with the MinOverlapPlacementPenalties style.

MinOverlapPercentPlacement is similar to MinOverlapPlacement but tries to minimize the overlapped percentages of other windows instead of the overlapped area in pixels. This placement policy tries to avoid covering other windows completely and tries even harder not to cover small windows. This can be configured with the MinOverlapPlacementPenalties and MinOverlapPercentPlacementPenalties styles.

MinOverlapPlacementPenalties takes at most 6 positive or null decimal arguments:

normal ontop icon sticky below strut

if trailing arguments are missing the default is used which is:

1 5 10 1 0.05 50

To reset this style to the default values, prefix it with a '!'. This style configures the MinOverlapPlacement and MinOverlapPercentPlacement placement policy. The normal factor affects normal windows, the ontop factor affects windows with a greater layer than the window being placed, the icon factor affects icons, the sticky factor affects sticky windows, the below factor affects windows with a smaller layer than the window being placed, the strut factor affects the complement of the EWMH working area if the window being placed has the EWMHPlacementUseWorkingArea style and windows with an EWMH strut hint (i.e., a "please do not cover me" hint) if the window being placed has the EWMHPlacementUseDynamicWorkingArea style. These factors represent the amount of area that these types of windows (or area) are counted as, when a new window is placed. For example, by default the area of ontop windows is counted 5 times as much as normal windows. So MinOverlapPlacement and MinOverlapPercentPlacement covers 5 times as much area of another window before it will cover an ontop window. To treat ontop windows the same as other windows, set this to 1. To really, really avoid putting windows under ontop windows, set this to a high value, say 1000. This style affects the window already mapped and not the window which is currently placed. There is one exception to this rule: in the case of the window being placed has the EWMHPlacementUseWorkingArea style the strut factor affects the placed window.

MinOverlapPercentPlacementPenalties takes at most 4 positive or null integer arguments:

cover_100 cover_95 cover_85 cover_75

if trailing arguments are missing the defaults are used which are:

12 6 4 1

To reset this style to the default values, prefix it with a '!'. This style affects the MinOverlapPercentPlacement placement policy and is similar to the MinOverlapPlacementPenalties style. The cover_xx factor is used when the window being placed covers at least xx percent of the window. This factor is added to the factor determined by the MinOverlapPlacementPenalties style.

ManualPlacement (aka active placement). The user is required to place every new window manually. The window only shows as a rubber band until a place is selected manually. The window is placed when a mouse button or any key except Escape is pressed. Escape aborts manual placement which places the window in the top left corner of the screen. If mouse button 2 is pressed during the initial placement of a window (respectively Shift and mouse button 1 in case Mwm emulation has been enabled with the Emulate command), the user is asked to resize the window too.

It is possible to define buttons usable to place windows with the Move command and the special context 'P' for placement (see Move command). However, you can't redefine the way to also resize the window other than the way it is affected by the Emulate command. The button used for placing the window can be checked with the PlacedByButton condition (see Current command).

Example:

Style * ManualPlacement
*FvwmEvent: PassID
*FvwmEvent: add_window GrowDownFunc
AddToFunc StartFunction
+ I FvwmEvent
AddToFunc GrowDownFunc
+ I windowid $0 (PlacedByButton 3) \


  Resize bottomright keep -0p

Now, whenever a window is created and the user presses button 3 to finish initial placement, the window is automatically enlarged until it hits the bottom screen border.

Old placement styles DumbPlacement / SmartPlacement / SmartPlacementOff, CleverPlacement / CleverPlacementOff, ActivePlacement / RandomPlacement, ActivePlacementsHonorsStartsOnPage / ActivePlacementsHonorsStartsOnPageOff, GlobalOpts SmartPlacementIsReallySmart / GlobalOpts SmartPlacementIsNormal are still supported but will be removed in the future. The old and new styles can be translated according to the following table:

GlobalOpts SmartPlacementIsReallySmart
Style * SmartPlacement
-->
Style * SmartPlacement, CleverPlacement
GlobalOpts SmartPlacementIsNormal
Style * SmartPlacement


  -->
Style * SmartPlacement, CleverPlacementOff
Style * DumbPlacement, RandomPlacement


  -->
Style * CascadePlacement
Style * DumbPlacement, ActivePlacement


  -->
Style * ManualPlacement
Style * SmartPlacement, \
RandomPlacement, CleverPlacementOff


  -->
Style * TileCascadePlacement
Style * SmartPlacement, \
ActivePlacement, CleverPlacementOff


  -->
Style * TileManualPlacement
Style * SmartPlacement, CleverPlacement


  -->
Style * MinOverlapPlacement
Style * SmartPlacement, \
ActivePlacement, CleverPlacement


  -->
Style * MinOverlapPercentPlacement
Style * ActivePlacementsHonorsStartsOnPage


  -->
Style * ManualPlacementsHonorsStartsOnPage
Style * ActivePlacementsHonorsStartsOnPageOff


  -->
Style * ManualPlacementsHonorsStartsOnPageOff

!UseUSPosition works like !UsePPosition but applies suppresses using the user specified position indicated by the program (USPosition hint). It is generally a bad thing to override the user's choice, but some applications misuse the USPosition hint to force their windows to a certain spot on the screen without the user's consent. Note: !UseUSPosition is equivalent to the deprecated option !USPosition

NoUseTransientPPosition and UseTransientPPosition work like !UsePPosition and UsePPosition but apply only to transient windows. Note: !UseTransientPPosition is equivalent to the deprecated option !TransientPPosition

NoUseIconPosition instructs fvwm to ignore the program specified icon position (IconPosition hint) when iconifying the window. Note: !UseIconPosition is equivalent to the deprecated option !IconPosition

StartsOnDesk takes a numeric argument which is the desktop number on which the window should be initially placed. Note that standard Xt programs can also specify this via a resource (e.g. "-xrm '*Desk: 1'").

StartsOnPage takes 1, 2, or 3 numeric arguments. If one or three arguments are given, the first (or only) argument is the desktop number. If three arguments are given, the 2nd and 3rd arguments identify the x,y page position on the virtual window. If two arguments are given, they specify the page position, and indicate no desk preference. If only one argument is given, StartsOnPage functions exactly like StartsOnDesk. For those standard Xt programs which understand this usage, the starting desk/page can also be specified via a resource (e.g., "-xrm '*page: 1 0 2'"). StartsOnPage in conjunction with SkipMapping is a useful technique when you want to start an app on some other page and continue with what you were doing, rather than waiting for it to appear.

StartsOnScreen takes one argument. It can be 'p' for the primary screen, 'c' for the current screen (containing the mouse pointer), 'g' for the global screen or the screen number itself (counting from zero). A new window is placed on the specified Xinerama screen. The default is to place windows on the screen that contains the mouse pointer at the time the window is created. However, those windows which are not placed by fvwm (i.e., those with a USPosition hint from a user specified geometry) are normally placed in a position relative to the global screen. The StartsOnScreen style is also useful to cause these windows to be placed relative to a specific Xinerama screen. For example:

Style * StartsOnScreen c

Would cause all windows, including those with their own geometry to be placed relative to the current Xinerama screen rather than the global screen. For those standard Xt programs which understand this usage, the starting desk/page can also be specified via a resource (e.g., "-xrm '*fvwmscreen: c'"). ('fvwmscreen' was chosen because some applications already use ´.screen' for other purposes.)

StartsOnPageIncludesTransients causes the StartsOnPage style to be applied even for transient windows. This is not usually useful, since transients are usually pop ups that you want to appear in your visible viewport; but occasionally an application uses a transient for something like a startup window that needs to be coerced into place.

ManualPlacementIgnoresStartsOnPage suppresses StartsOnPage or StartsOnDesk placement in the event that both ManualPlacement and SkipMapping are in effect when a window is created. This prevents you from interactively placing a window and then wondering where it disappeared to, because it got placed on a different desk or page. ManualPlacementHonorsStartsOnPage allows this to happen anyway. The option has no effect if SkipMapping is not in effect, because fvwm switches to the proper desk/page to perform interactive placement. The default is ManualPlacementIgnoresStartsOnPage; ManualPlacementHonorsStartsOnPage matches the way the old StartsOnDesk style used to handle the situation.

CaptureHonorsStartsOnPage causes the initial capture (of an already existing window) at startup to place the window according to the StartsOnPage and StartsOnScreen desk, page and Xinerama screen specification. CaptureIgnoresStartsOnPage causes fvwm to ignore these settings (including StartsOnDesk) on initial capture. The default is CaptureIgnoresStartsOnPage.

RecaptureHonorsStartsOnPage causes a window to be placed according to, or revert to, the StartsOnPage and StartsOnScreen desk, page and Xinerama screen specification on Restart or Recapture. RecaptureIgnoresStartsOnPage causes fvwm to respect the current window position on Restart or Recapture. The default is RecaptureIgnoresStartsOnPage.

Layer accepts one optional argument: a non-negative integer. This is the layer the window is put in. If no argument is given, any previously set value is deleted and the default layer is implied.

StaysOnTop puts the window in the top layer. This layer can be changed by the command DefaultLayers; the default is 6.

StaysPut puts the window in the put layer. This layer can be changed by the command DefaultLayers; the default is 4.

StaysOnBottom puts the window in the bottom layer. This layer can be changed by the command DefaultLayers; the default is 2.

StartsLowered instructs fvwm to put the window initially at the bottom of its layer rather than the default StartsRaised.

StartShaded tells fvwm to shade the window. An optional direction argument may be given, which can be one of "North", "South", "West", "East", "NorthWest", "NorthEast", "SouthWest", "SouthEast" or if no direction is given, the default is to shade north.

SkipMapping tells fvwm not to switch to the desk the window is on when it gets mapped initially (useful with StartsOnDesk or StartsOnPage).

KeepWindowGroupsOnDesk makes new windows that have the window group hint set appear on the same desk as the other windows of the same group. Since this behavior may be confusing, the default setting is ScatterWindowGroups. The window group hint is ignored when placing windows in this case.

A window with the RaiseTransient style that has transient windows raises all its transients when it is raised. The DontRaiseTransient style disables this behavior. All windows are then treated as if they had no transients.

A window with the LowerTransient style that has transient windows lowers all its transients when it is lowered. The DontLowerTransient style disables this behavior. All windows are then treated as if they had no transients.

The StackTransientParent style augments RaiseTransient and LowerTransient styles. Raising a window with StackTransientParent style transfers the raise action to the main window if the window being raised is a transient and its main window has RaiseTransient style; this effect makes raise on a transient act just like raise on its main - the whole group is raised. Similar behavior holds for lowering a whole group of transients when the main has LowerTransient style. DontStackTransientParent turns this behavior off. (Dont)StackTransientParent has no effect if RaiseTransient and LowerTransient are not used.

A reasonable emulation of Motif raise/lower on transients is possible like this

Style * RaiseTransient
Style * LowerTransient
Style * StackTransientParent

EWMHDonateIcon instructs fvwm to set the application ewmh icon hint with the icon that is used by fvwm if the application does not provide such hint (and if the icon used by fvwm is not an icon window). EWMHDonateMiniIcon does the same thing for mini icons. This allows compliant pager, taskbar, iconbox ...etc to display the same (mini) icons as fvwm. Note that on some hardware (e.g., 8-bit displays) these styles can slow down window mapping and that in general only one of these styles is needed by a compliant application. EWMHDontDonateIcon and EWMHDontDonateMiniIcon restore the defaults which are to not set any ewmh (mini) icons hints.

By default, if an application provides an ewmh icon hint of small size (i.e., height and width less than or equal to 22), then fvwm uses this icon as its mini icon. EWMHMiniIconOverride instructs fvwm to ignore ewmh icons and to use the mini icon provided by the MiniIcon style. EWMHNoMiniIconOverride restores the default.

EWMHUseStackingOrderHints causes fvwm to use EWMH hints and respect EWMH hints which change the window layer. EWMHIgnoreStackingOrderHints causes fvwm to ignore EWMH layer hints.

An application can ask for some reserved space on the desktop by a hint. In the EWMH terminology such a hint is called a strut and it is used to compute the working area and may be used for window placement and in the maximize command. EWMHIgnoreStrutHints causes fvwm to ignore such hints, as EWMHUseStrutHints, causes fvwm to use it which is the default.

EWMHIgnoreStateHints causes fvwm to ignore initial EWMH state hints when a new window is mapped. The default EWMHUseStateHints causes fvwm to accept such hints.

EWMHIgnoreWindowType causes fvwm to ignore EWMH window type specification. The default !EWMHIgnoreWindowType causes fvwm to style windows of specified types as such.

EWMHMaximizeIgnoreWorkingArea causes fvwm to ignore the EWMH working area when it executes a Maximize command. With EWMHMaximizeUseWorkingArea the EWMH working area is used as with EWMHMaximizeUseDynamicWorkingArea the EWMH dynamic working area is used (the default).

EWMHPlacementIgnoreWorkingArea causes fvwm to ignore the EWMH working area when it places (or places again) a window. With EWMHPlacementUseWorkingArea the EWMH working area is taken in account as with EWMHPlacementUseDynamicWorkingArea the EWMH dynamic working area is taken in account (the default). Note that with the MinOverlapPlacement and MinOverlapPercentPlacement placement policy, the way the EWMH (dynamic) working area is taken in account is configurable with the MinOverlapPlacementPenalties style.

Note: This style is useless if the X server does not allow backing store.

SaveUnder enables the corresponding window attribute in the X server. For a window using this style, the X server tries to store the graphics below it in memory which is usually slower if the client runs on the same machine as the X server. SaveUnder may speed up fvwm if the connection to the X server is slow (e.g. over a modem link). To disable save under, use the SaveUnderOff style. This is the default. See also BackingStore above.

Note: This style is useless if the X server does not allow save under.

ParentalRelativity enables clients that use a background pixmap of type ParentRelative to achieve transparency. Fvwm modules that support transparent colorsets require this setting. Opacity is the default and should be used for all non-transparent clients for better performance.

MwmDecor makes fvwm attempt to recognize and respect the mwm decoration hints that applications occasionally use. To switch this style off, use the NoDecorHint style.

MwmFunctions makes fvwm attempt to recognize and respect the mwm prohibited operations hints that applications occasionally use. HintOverride makes fvwm shade out operations that mwm would prohibit, but it lets you perform the operation anyway. NoFuncHint allows turns off the mwm hints completely.

OLDecor makes fvwm attempt to recognize and respect the olwm and olvwm hints that many older XView and OLIT applications use. Switch this option off with NoOLDecor.

With GNOMEIgnoreHints fvwm ignores all GNOME hints for the window, even if GNOME compliance is compiled in. This is useful for those pesky applications that try to be more clever than the user and use GNOME hints to force the window manager to ignore the user's preferences. The GNOMEUseHints style switches back to the default behavior.

UseDecor This style is deprecated and will be removed in the future. There are plans to replace it with a more flexible solution in fvwm-3.0.

UseDecor accepts one argument: the name of a decor created with AddToDecor. If no decor name is specified, the "Default" decor is used. Windows do not actually contain decors, but are always assigned to one. If the decor is later modified with AddToDecor, the changes are visible for all windows which are assigned to it. The decor for a window can be reassigned with ChangeDecor.

UseStyle This style is deprecated and will be removed in the future. There are plans to replace it with a more flexible solution in fvwm-3.0.

UseStyle takes one arg, which is the name of another style. That way you can have unrelated window names easily inherit similar traits without retyping. For example:

  Style rxvt UseStyle XTerm

Warning: If a style is built from one or more parent styles and the parent styles are changed, the derived style is not modified. To achieve this you have to issue the UseStyle line again.

Unmanaged Windows with the Unmanaged style option are ignored by fvwm. They are not decorated, can not be moved or resized, etc. You probably want to use Bugopts RaiseOverUnmanaged too. This option can be turned off with the !Unmanaged style. However, windows that are already ignored at the time when the option is set must be recaptured with the Recapture command in order to become managed.

State sets the initial value of one of the 32 user defined states which are associated with each window. The state number ranges from 0 to 31 and must be given as an argument. The states have no meaning in fvwm, but they can be checked in conditional commands like Next with the State condition and manipulated with the State command.

# turn on state 11 for xterms ...
Style xterm State 11
# ... but not for rxvts.
Style rxvt !State 11

Windows with the WindowListSkip styles do not appear in the menu that is created with the WindowList command or the lists shown in modules like FvwmIconMan. In the modules, the style can usually be ignored with an option. Please refer to the man page of the module in question for further information. To disable this feature, use the default style WindowListHit.

The styles CirculateSkip and CirculateHit control whether the window is considered by conditional commands, for example Next, Prev or All. Windows with CirculateSkip, are never selected by conditional commands. However, the styles can be overridden explicitly in the condition with the CirculateHit, CirculateHitIcon or CirculateHitShaded conditions, and some conditional commands, e.g. Current and All, do this by default. The styles CirculateSkipIcon, CirculateHitIcon, CirculateSkipShaded and CirculateHitShaded work like CirculateSkip and CirculateHit but apply only to iconic or shaded windows. Note: if multiple ...Skip... options are combined, windows are only selected if they match none of the given conditions. So, with

Style * CirculateSkipIcon, CirculateSkipShaded

only windows that are neither iconic nor shaded are selected. Note: For historical reasons, the conditional commands understand the names of these styles as condition names. Take care not to confuse them.

# Change default fvwm behavior to no title-
# bars on windows! Also define a default icon.
Style *             !Title,                \


                    Icon unknown1.xpm,     \


                    BorderWidth 4,         \


                    HandleWidth 5
# now, window specific changes:
Style Fvwm*       !Handles, Sticky,        \


                  WindowListSkip,          \


                  BorderWidth 0
Style FvwmPager   StaysOnTop, BorderWidth 0
Style *lock       !Handles, Sticky,        \


                  StaysOnTop, WindowListSkip
Style xbiff       Sticky, WindowListSkip
Style FvwmButtons !Handles, Sticky,        \


                  WindowListSkip
Style sxpm        !Handles
# Put title-bars back on xterms only!
Style xterm     Title, Color black/grey
Style rxvt        Icon term.xpm
Style xterm       Icon rterm.xpm
Style xcalc       Icon xcalc.xpm
Style xbiff       Icon mail1.xpm
Style xmh         Icon mail1.xpm,         \


                    StartsOnDesk 2
Style xman        Icon xman.xpm
Style matlab      Icon math4.xpm,         \


                    StartsOnDesk 3
Style xmag        Icon magnifying_glass2.xpm
Style xgraph      Icon graphs.xpm
Style FvwmButtons Icon toolbox.xpm
Style Maker       StartsOnDesk 1
Style signal      StartsOnDesk 3
# Fire up Netscape on the second desk, in the
# middle of my 3x3 virtual desktop, and do not
# bother me with it...
Style Netscape* SkipMapping,              \


                StartsOnPage 1 1 1

Note that all properties for a window are or'ed together. In the above example "FvwmPager" gets the property StaysOnTop via an exact window name match but also gets !Handles, Sticky and WindowListSkip by a match to "Fvwm*". It gets !Title by virtue of a match to "*". If conflicting styles are specified for a window, then the last style specified is used.

If state is omitted, then the style is added to every state. If the style and flags are enclosed in parentheses, then multiple state definitions can be placed on a single line. Flags for additional button styles cannot be changed after definition.

Buttons are drawn in the order of definition, beginning with the most recent button style, followed by those added with AddButtonStyle. To clear the button style stack, change style flags, or for descriptions of available styles and flags, see the ButtonStyle command. Examples:

ButtonStyle 1 Pixmap led.xpm -- Top Left
ButtonStyle 1 ActiveDown HGradient 8 grey black
ButtonStyle All --  UseTitleStyle
AddButtonStyle 1 \
	ActiveUp (Pixmap a.xpm) \
	ActiveDown (Pixmap b.xpm -- Top)
AddButtonStyle 1 Vector 4 50x30@1 70x70@0 30x70@0 50x30@1

Initially for this example all button states are set to a pixmap. The second line replaces the "ActiveDown" state with a gradient (it overrides the pixmap assigned to it in the line before, which assigned the same style to every state). Then, the UseTitleStyle flag is set for all buttons, which causes fvwm to draw any styles set with TitleStyle before drawing the buttons. Finally, AddButtonStyle is used to place additional pixmaps for both "ActiveUp" and "ActiveDown" states and a vector button style is drawn on top of all states.

Title-bars are drawn in the order of definition, beginning with the most recent TitleStyle, followed by those added with AddTitleStyle. To clear the title style stack, change style flags, or for the descriptions of available styles and flags, see the TitleStyle and ButtonStyle commands.

Add or divert commands to the decor named decor. A decor is a name given to the set of commands which affect button styles, title-bar styles and border styles. If decor does not exist it is created; otherwise the existing decor is modified. Note: Earlier versions allowed to use the HilightColor, HilightColorset and WindowFont commands in decors. This is no longer possible. Please use the Style command with the Hilight... and Font options.

New decors start out exactly like the "default" decor without any style definitions. A given decor may be applied to a set of windows with the UseDecor option of the Style command. Modifying an existing decor affects all windows which are currently assigned to it.

AddToDecor is similar in usage to the AddToMenu and AddToFunc commands, except that menus and functions are replaced by ButtonStyle, AddButtonStyle, TitleStyle, AddTitleStyle and BorderStyle commands. Decors created with AddToDecor can be manipulated with ChangeDecor, DestroyDecor, UpdateDecor and the Style option.

The following example creates a decor "FlatDecor" and style "FlatStyle". They are distinct entities:

AddToDecor FlatDecor
+ ButtonStyle All Active (-- flat) Inactive (-- flat)
+ TitleStyle  -- flat
+ BorderStyle -- HiddenHandles NoInset
Style FlatStyle \
	UseDecor FlatDecor, HandleWidth 4, ForeColor white, \
	BackColor grey40, HilightFore black, HilightBack grey70
Style xterm UseStyle FlatStyle

An existing window's decor may be reassigned with ChangeDecor. A decor can be destroyed with DestroyDecor.

DestroyDecor FlatDecor
AddToDecor FlatDecor ...
Style FlatStyle UseDecor FlatDecor

and now apply the style again:

Style xterm UseStyle FlatStyle

style is a subset of the available button styles, and can only be TiledPixmap (uniform pixmaps which match the bevel colors work best this way) or Colorset. If a '!' is prefixed to any flag, the behavior is negated. If style is not specified, then one can change flags without resetting the style.

The HiddenHandles flag hides the corner handle dividing lines on windows with handles (this option has no effect for !Handles windows). By default, HiddenHandles is disabled.

The NoInset flag supplements HiddenHandles. If given, the inner bevel around the window frame is not drawn. If HiddenHandles is not specified, the frame looks a little strange.

Raised causes a raised relief pattern to be drawn (default). Sunk causes a sunken relief pattern to be drawn. Flat inhibits the relief pattern from being drawn.

To decorate the active and inactive window borders with a textured pixmap, one might specify:

BorderStyle Active TiledPixmap marble.xpm
BorderStyle Inactive TiledPixmap granite.xpm
BorderStyle Active -- HiddenHandles NoInset

To clear the style for both states:

BorderStyle Simple

To clear for a single state:

BorderStyle Active Simple

To unset a flag for a given state:

BorderStyle Inactive -- !NoInset

title-bar buttons can inherit the border style with the UseBorderStyle flag (see ButtonStyle).

If ActiveDown argument is "False", no different button style for the pressed down buttons used, instead "ActiveUp" state is used even when button is pressed.

If Inactive argument is "False", focused and unfocused windows look similarly, the corresponding "Active" states are always used.

If InactiveDown argument is "False" (only applied when Inactive is "True"), the pressed titles and title buttons in non-focused windows are drawn using "InactiveUp" or "ActiveUp" states depending on the values of the other key words.

state refers to which button state should be set. Button states are defined as follows: "ActiveUp" and "ActiveDown" refer to the un-pressed and pressed states for buttons on active windows; while the "InactiveUp" and "InactiveDown" states denote buttons on inactive windows. The shortcut "Active" denotes both "ActiveUp" and "ActiveDown" states. Shortcut "Inactive" denotes both "InactiveUp" and "InactiveDown" states. The similar state names like just described, but with the "Toggled" prefix are used instead for title buttons which have one of the MwmDecorMax, MwmDecorShade, MwmDecorStick or MwmDecorLayer hints, if the window is maximized, shaded, sticky or placed on specific layer, respectively.

AddToDecor Default


 + ButtonStyle 6                   \


   Vector 4 50x25@1 85x75@0 15x75@0 50x25@1


 + ButtonStyle 6 ToggledActiveUp   \


   Vector 4 50x75@0 85x25@1 15x25@0 50x75@0


 + ButtonStyle 6 ToggledActiveDown \


   Vector 4 50x75@0 85x25@1 15x25@0 50x75@0


 + ButtonStyle 6 ToggledInactive   \


   Vector 4 50x75@0 85x25@1 15x25@0 50x75@0


 + ButtonStyle 6 - MwmDecorShade
Mouse 0 6 N WindowShade

Additionally, the following shortcuts may be used: "AllNormal", "AllToggled", "AllActive", "AllInactive", "AllUp", "AllDown". They are actually different masks for 4 individual states from 8 total. These are supported too: "AllActiveUp", "AllActiveDown", "AllInactiveUp", "AllInactiveDown".

If state is specified, that particular button state is set. If state is omitted, every state is set. Specifying a style destroys the current style (use AddButtonStyle to avoid this).

If style is omitted, then state-dependent flags can be set for the primary button style without destroying the current style. Examples (each line should be considered independent):

ButtonStyle Left -- flat
ButtonStyle All ActiveUp (-- flat) Inactive (-- flat)

The first line sets every state of the left buttons to flat, while the second sets only the "ActiveUp" and "Inactive" states of every button to flat (only flags are changed; the buttons' individual styles are not changed).

If you want to reset all buttons to their defaults:

ButtonStyle Reset

To reset the "ActiveUp" button state of button 1 to the default:

ButtonStyle 1 ActiveUp Default

To reset all button states of button 1 to the default of button number 2:

ButtonStyle 1 Default 2

For any button, multiple state definitions can be given on one line by enclosing the style and flags in parentheses. If only one definition per line is given the parentheses can be omitted.

flags affect the specified state. If a '!' is prefixed to any flag, its behavior is negated. The available state-dependent flags for all styles are described here (the ButtonStyle entry deals with state-independent flags).

Raised causes a raised relief pattern to be drawn.

Sunk causes a sunken relief pattern to be drawn.

Flat inhibits the relief pattern from being drawn.

UseTitleStyle causes the given button state to render the current title style before rendering the buttons' own styles. The Raised, Flat and Sunk TitleStyle flags are ignored since they are redundant in this context.

UseBorderStyle causes the button to inherit the decorated BorderStyle options.

Raised, Sunk and Flat are mutually exclusive, and can be specified for the initial ButtonStyle only. UseTitleStyle and UseBorderStyle are also mutually exclusive (both can be off however). The default is Raised with both UseBorderStyle and UseTitleStyle left unset.

Important

for the "ActiveDown" and "InactiveDown" states: When a button is pressed, the relief is inverted. Because of this, to obtain the raised look in "ActiveDown" or "InactiveDown" states you must specify the opposite of the desired relief (i.e. Sunk for "ActiveDown" or "InactiveDown"). This behavior is consistent, but may seem confusing at first. The same applies to the "Toggled" states.

Button styles are classified as non-destructive, partially destructive, or fully destructive. Non-destructive styles do not affect the image. Partially destructive styles can obscure some or all parts of the underlying image (i.e. Pixmap). Fully destructive styles obscure the entire underlying image (i.e. Solid or one of the gradient styles). Thus, if stacking styles with AddButtonStyle (or AddTitleStyle for title-bars), use care in sequencing styles to minimize redraw.

The available styles are:

Simple, Default, Solid, Colorset, Vector, ?Gradient, Pixmap, AdjustedPixmap, ShrunkPixmap, StretchedPixmap, TiledPixmap, MiniIcon

The description of these styles and their arguments follow:

The Simple style does nothing. There are no arguments, and this style is an example of a non-destructive button style.

The Default style conditionally accepts one argument: a number which specifies the default button number to load. If the style command given is ButtonStyle or AddButtonStyle, the argument is optional (if given, it overrides the current button). If a command other than ButtonStyle or AddButtonStyle is used, the number must be specified.

The Solid style fills the button with a solid color. The relief border color is not affected. The color is specified as a single argument. This style is fully destructive.

The Colorset cs [alpha] style fills the button with the Colorset cs. The optional alpha argument is a percentage between 0 and 100. It causes fvwm to merge the colorset background onto the button using this percentage. If the percentage is 0 the colorset background is hidden and if it is 100 the colorset background is fully applied. The default is 100. So, the destructiveness depends on the alpha argument.

The Vector num X[offsetp]xY[offsetp]@C ... style draws a line pattern. Since this is a standard button style, the keyword Vector is optional, num is a number of point specifications of the form X[offsetp]xY[offsetp]@C ... X and Y are point coordinates inside the button, given in percents (from 0 to 100). An optional absolute offset in pixels, can be given as "+<offset>p" for a positive or "-<offset>p" for a negative offset.

C specifies a line color (0 - the shadow color, 1 - the highlight color, 2 - the background color, 3 - the foreground color, 4 - only move the point, do not draw). The first point color is not used. You can use up to 10000 points in a line pattern. This style is partially destructive.

The specification is a little cumbersome:

ButtonStyle 2 Vector 4 50x30@1 70x70@0 30x70@0 50x30@1

then the button 2 decoration uses a 4-point pattern consisting of a line from (x=50,y=30) to (70,70) in the shadow color (@0), and then to (30,70) in the shadow color, and finally to (50,30) in the highlight color (@1). Is that too confusing? See the fvwm web pages for some examples with screenshots.

A more complex example of Vector:

ButtonStyle 8 Vector 10 45x65@2 45x75@3 \


  20x75@3 20x50@3 35x50@3 35x65@1 35x25@1 \


  75x25@1 75x65@0 35x65@0
ButtonStyle 0 Vector 10 45x65@2 45x75@0 \


  20x75@0 20x50@1 45x50@1 45x65@0 75x65@3 \


  75x25@3 35x25@3 35x47@3

The ?Gradient styles denote color gradients. Fill in the question mark with any one of the defined gradient types. Please refer to the Color Gradients section for a description of the gradient syntax. The gradient styles are fully destructive.

The Pixmap style displays a pixmap. A pixmap should be specified as an argument. For example, the following would give button number 2 the same pixmap for all 4 states (2 active and 2 inactive), and button number 4 all different pixmaps.

ButtonStyle 2 Pixmap my_pixmap.xpm
ButtonStyle 4 \
	ActiveUp (Pixmap activeup.xpm) \
	ActiveDown (Pixmap activedown.xpm) \
	Inactive (Pixmap inactiveup.xpm)
ButtonStyle 4 \
	InactiveDown Pixmap inactivedown.xpm

The pixmap specification can be given as an absolute or relative pathname (see ImagePath). If the pixmap cannot be found, the button style reverts to Simple. Flags specific to the Pixmap style are Left, Right, Top, and Bottom. These can be used to justify the pixmap (default is centered for both directions). Pixmap transparency is used for the color "None." This style is partially destructive.

The AdjustedPixmap style is similar to the Pixmap style. But the image is resized to exactly fit the button.

The ShrunkPixmap style is similar to the Pixmap style. But if the image is bigger than the button the image is resized to fit into the button.

The StretchedPixmap style is similar to the Pixmap style. But if the image is smaller than the button the image is resized to cover the button.

The TiledPixmap style accepts a pixmap to be tiled as the button background. One pixmap is specified as an argument. Pixmap transparency is not used. This style is fully destructive.

The MiniIcon style draws the window's miniature icon in the button, which is specified with the MiniIcon option of the Style command. This button style accepts no arguments. Example:

Style *     MiniIcon mini-bx2.xpm
Style xterm MiniIcon mini-term.xpm
Style Emacs MiniIcon mini-doc.xpm
ButtonStyle 1 MiniIcon

The following flags are usually used to tell fvwm which buttons should be affected by mwm function hints (see MwmFunctions option of the Style command. This is not done automatically since you might have buttons bound to complex functions, for instance.

MwmDecorMenu should be assigned to title-bar buttons which display a menu. The default assignment is the leftmost button. When a window with the MwmFunctions Style option requests not to show this button, it is hidden.

MwmDecorMin should be assigned to title-bar buttons which minimize or iconify the window. The default assignment is the second button over from the rightmost button. When a window with the MwmFunctions Style option requests not to show this button, it is hidden.

MwmDecorMax should be assigned to title-bar buttons which maximize the window. The default assignment is the rightmost button. When a window with the MwmFunctions Style option requests not to show this button, it is hidden. When the window is maximized, the vector pattern on the button looks pressed in.

MwmDecorShade should be assigned to title-bar buttons which shade the window (see WindowShade command). When the window is shaded, the vector pattern on the button looks pressed in.

MwmDecorStick should be assigned to title-bar buttons which make the window sticky. When the window is sticky, the vector pattern on the button looks pressed in.

The flag MwmDecorLayer layer should be assigned to title-bar buttons which place the window in the layer numbered layer. When the window is on that specific layer, the vector pattern on the button looks pressed in.

Changes the decor of a window to decor. decor is "Default" or the name of a decor defined with AddToDecor. If decor is invalid, nothing occurs. If called from somewhere in a window or its border, then that window is affected. If called from the root window the user is allowed to select the target window. ChangeDecor only affects attributes which can be set using the AddToDecor command.

ChangeDecor CustomDecor1

Deletes the decor defined with AddToDecor, so that subsequent references to it are no longer valid. Windows using this decor revert to the "Default" decor. The optional parameter recreate tells fvwm not to throw away the decor completely but to throw away only its contents. If the decor is created again later, windows do not use it before the UseDecor style is applied again unless the decor was destroyed with the recreate option. The decor named "Default" cannot be destroyed.

DestroyDecor CustomDecor1

If a '!' is prefixed to any flag, its behavior is negated. Valid flags for each state include Raised, Flat and Sunk (these are mutually exclusive). The default is Raised. See the note in ButtonStyle regarding the "ActiveDown" state. Examples:

TitleStyle ActiveUp HGradient 16 navy black
TitleStyle \
	ActiveDown (Solid red -- flat) \
	Inactive (TiledPixmap wood.xpm)
TitleStyle \
	ActiveUp (-- Flat) \
	ActiveDown (-- Raised) \
	InactiveUp (-- Flat) \
	InactiveDown (-- Sunk)

This sets the "ActiveUp" state to a horizontal gradient, the "ActiveDown" state to solid red, and the "Inactive" states to a tiled wood pixmap. Finally, "ActiveUp" and "InactiveUp" are set to look flat, while "ActiveDown" set to be sunk (the Raised flag for the "ActiveDown" state causes it to appear sunk due to relief inversion), and "InactiveDown" is set to look raised. An example which sets flags for all states:

TitleStyle -- flat

For a flattened look:

TitleStyle -- flat
ButtonStyle All Active (-- flat) Inactive (-- flat)

TitleStyle accepts all the ButtonStyle styles and arguments:

Simple, Default, Solid, Colorset, Vector, ?Gradient, Pixmap, AdjustedPixmap, ShrunkPixmap, StretchedPixmap, TiledPixmap, MiniIcon.

See the ButtonStyle command for a description of all these styles and their arguments.

In addition to these styles TitleStyle accepts a powerful MultiPixmap option. This allows you to specify different pixmaps, colorsets or colors for different parts of the titlebar. Some of them are tiled or stretched to fit a particular space; others are discrete "transition" images. The definable sections are:

Main

LeftMain

RightMain

UnderText

LeftOfText

RightOfText

LeftEnd

RightEnd

Buttons

LeftButtons

RightButtons

None of these are mandatory except for Main (or, if you do not define Main you must define both LeftMain and RightMain). If no Buttons pixmaps are defined and UseTitleStyle is specified for one or more buttons, Main, LeftMain or RightMain are used as appropriate.

The syntax for this style type is:

MultiPixmap section style arg, ...

continuing for whatever you want to define. The style can be either TiledPixmap, AdjustedPixmap, Colorset or Solid. See the ButtonStyle command for the description of these styles. In the case of a transition section, LeftEnd, LeftOfText, RightOfText or RightEnd, AdjustedPixmap only resize the pixmap in the "y" direction. For the Colorset and Solid styles a width of the half of the title bar height is assumed for the transition sections.

An example:

MultiPixmap Main AdjustedPixmap foo.xpm, \


            UnderText TiledPixmap bar.xpm, \


            Buttons Colorset 2

Note that the old syntax is still supported: if the style is omitted, TiledPixmap is assumed and adding "(stretched)" between the section and the file name implies AdjustedPixmap.

This command is kept mainly for backward compatibility. Since all elements of a decor are updated immediately when they are changed, this command is mostly useless.

Updates window decorations. decor is an optional argument which specifies the decor to update. If given, only windows which are assigned to that particular decor are updated. This command is useful, for instance, after a ButtonStyle, TitleStyle or BorderStyle (possibly used in conjunction with AddToDecor). Specifying an invalid decor results in all windows being updated. This command is less disturbing than Recapture, but does not affect window style options as Recapture does.

EdgeScroll 100 100

but find themselves accidentally flipping pages when they do not want to. If -1 is given as the delay, scrolling is disabled completely.

The second form of invocation with two or three arguments is obsolete and should be replaced with the following three commands as needed:

EdgeResistance scrolling
Style * EdgeMoveDelay scrolling
Style * EdgeMoveResistance moving
or
Style * EdgeMoveResistance moving xinerama-scrolling

Fvwm does this substitution automatically and prints a warning.

EdgeScroll 0 0

in your config file, or possibly better, set the EdgeThickness to zero. See the EdgeThickness command. If you want whole pages, use

EdgeScroll 100 100

Both horizontal and vertical should be positive numbers.

If the horizontal and vertical percentages are multiplied by 1000 or one of the keywords wrap, wrapx and wrapy is given then scrolling wraps around at the edge of the desktop. If

EdgeScroll 100000 100000

is used fvwm scrolls by whole pages, wrapping around at the edge of the desktop.

In order to enable page scrolling via the mouse, four windows called the "pan frames" are placed at the very edge of the screen. This is how fvwm detects the mouse's presence at the window edge. Because of the way this works, they need to be at the top of the stack and eat mouse events, so if you have any kind of error along the lines of: "mouse clicks at the edge of the screen do the wrong thing" you're having trouble with the pan frames and (assuming you do not use the mouse to flip between pages) should set the EdgeThickness to 0.

A value of 0 completely disables mouse edge scrolling, even while dragging a window. 1 gives the smallest pan frames, which seem to work best except on some servers.

2 is the default.

Pan frames of 1 or 2 pixels can sometimes be confusing, for example, if you drag a window over the edge of the screen, so that it straddles a pan frame, clicks on the window, near the edge of the screen are treated as clicks on the root window.

The command takes 1, 2, 3, or 4 arguments. A single argument is interpreted as a relative desk number. Two arguments are understood as a relative and an absolute desk number. Three arguments specify a relative desk and the minimum and maximum of the allowable range. Four arguments specify the relative, absolute, minimum and maximum values. (Desktop numbers can be negative). If a literal prev is given as the single argument, the last visited desk number is used.

If arg1 is non zero then the next desktop number is the current desktop number plus arg1.

If arg1 is zero then the new desktop number is arg2. (If arg2 is not present, then the command has no effect.)

If min and max are given, the new desktop number is no smaller than min and no bigger than max. Values out of this range are truncated (if you gave an absolute desk number) or wrapped around (if you gave a relative desk number).

The syntax is the same as for MoveToDesk, which moves a window to a different desktop.

The number of active desktops is determined dynamically. Only desktops which contain windows or are currently being displayed are active. Desktop numbers must be between 2147483647 and -2147483648 (is that enough?).

Possible options are wrapx and wrapy to wrap around the x or y coordinate when the viewport is moved beyond the border of the desktop.

To go to the last visited page use prev as the first argument. The GotoPage function should not be used in a pop-up menu.

Examples:

# Go to page (2,3)
GotoPage 2 3
# Go to lowest and rightmost page
GotoPage -1 -1
# Go to last page visited
GotoPage prev
# Go two pages to the right and one page up
GotoPage +2p -1p

Scroll 100 100

means to scroll down and right by one full page.

Scroll 50 25

means to scroll right half a page and down a quarter of a page. The Scroll function should not be called from pop-up menus. Normally, scrolling stops at the edge of the desktop.

If the horizontal and vertical percentages are 100 or more and are multiplied by 1000 then scrolling wraps around at the edge of the desktop. If

Scroll 100000 0

is executed over and over fvwm moves to the next desktop page on each execution and wraps around at the edge of the desktop, so that every page is hit in turn.

If the letter 'p' is appended to each coordinate (horizontal and/or vertical), then the scroll amount is measured in pixels.

Without arguments or if the option reverse is given interactive scrolling takes place. The viewport scrolls as the mouse is moved. With the reverse option scrolling is done in opposite direction of the mouse movement, and without it scrolling in the same direction as the mouse.

The binding

Mouse 1 A CM Scroll reverse

gives an effect of grabbing and dragging the viewport with button 1 if Control and Meta is pressed.

XineramaPrimaryScreen <screen number>
Style * StartsOnScreen p

The primary screen is used in some of the modules and for the default icon box too. Any number that is zero or more is taken as the primary screen's number. Instead, the letter 'c' indicates to use the current screen (containing the pointer) whenever the primary screen is used. This may be very confusing under some circumstances. With 'g', the global screen is used as the primary screen, effectively disabling the primary screen. Calling this function with any other argument (including none) resets the primary screen to 0.

AddToFunc Move-or-Raise I Raise


 + M Move


 + D Lower

The function name is "Move-or-Raise", and it could be invoked from a menu or a mouse binding or key binding:

Mouse 1 TS A Move-or-Raise

The name must not contain embedded whitespace. No guarantees are made whether function names with embedded whitespace work or not. This behavior may also change in the future without further notice. The letter before the action tells what kind of action triggers the command which follows it. 'I' stands for "Immediate", and is executed as soon as the function is invoked. 'J' is similar to "Immediate" but is delayed until a button is pressed or released or the pointer is moved, or the function completes. It is always executed before the other function actions. 'M' stands for "Motion", i.e. if the user starts moving the mouse. 'C' stands for "Click", i.e., if the user presses and releases the mouse button. 'H' stands for "Hold", i.e. if the user presses a mouse button and holds it down for more than ClickTime milliseconds. 'D' stands for "Double-click". The action 'I' causes an action to be performed on the button-press, if the function is invoked with prior knowledge of which window to act on.

There is a number of predefined symbols that are replaced by certain values if they appear on the command line. Please refer to the Command Expansion section for details.

Warning
Please read the comments on executing complex functions in the section Scripting and Complex Functions.

Examples:

If you call

Key F10 R A Function MailFunction xmh "-font fixed"

and "MailFunction" is

AddToFunc MailFunction


 + I Next ($0) Iconify off


 + I Next (AcceptsFocus, $0) Focus


 + I None ($0) Exec exec $0 $1

Then the last line of the function becomes

 + I None (xmh) Exec exec xmh -font fixed

The expansion is performed as the function is executed, so you can use the same function with all sorts of different arguments. You could use

Key F11 R A Function MailFunction zmail "-bg pink"

in the same config, if you wanted. An example of using "$[w.id]" is:

AddToFunc PrintFunction


 + I Raise


 + I Exec xdpr -id $[w.id]

Note that "$$" is expanded to '$'.

Another example: bind right mouse button within the window button number 6 (this is a minimize button for the win95 theme) to iconify all windows of the same resource:

AddToFunc FuncIconifySameResource "I" All ($0) Iconify on
Mouse 3 6 A FuncIconifySameResource $[w.resource]

The following example binds function key F1 in the root window, with no modifiers, to the exec function. The program rxvt is started with an assortment of options.

Key F1 R N Exec exec rxvt -fg yellow -bg blue \


  -e /bin/tcsh

Note that this function doesn't wait for command to complete, so things like:

Exec "echo AddToMenu ... > /tmp/file"
Read /tmp/file

do not work reliably (see the PipeRead command).

Mouse 1 T A Function Move-or-Raise

The keyword Function may be omitted if FunctionName does not coincide with an fvwm command.

Warning: Please read the comments on executing complex functions in the section Scripting and Complex Functions.

The purpose of this command is to store internal information to fvwm which can be used bu fvwm functions, or when opening programs of a certain type. Previous to this command the only way to do this was via SetEnv but this is discouraged because it places such information in the environment, which pollutes it and makes the information global to other processes started by fvwm which may then modify them which might not be what's wanted. Hence the point of InfoStoreAdd is to still allow for such information to be stored, but kept internal to fvwm.

In this way, one can build up as many key/value pairs as needed. Recalling the value of a given key happens through fvwm's usual expansion mechanism. See the Command Expansion section for more details. For example:

    InfoStoreAdd teddybearprog xteddy


    # Echo the value of teddybearprog


    Echo $[infostore.teddybearprog]

Removing an entry from the InfoStore is done with the InfoStoreRemove command.

AddToMenu MyMenu " " Nop

then a blank line is inserted. If it looks like

+ "" Nop

then a separator line is inserted. Can also be used as the double-click action for Menu or Popup.

Example:

AddToMenu HomeDirMenu
PipeRead 'for i in $HOME/*; \


  do echo "+ $i Exec xterm -e vi $i"; done'

Note: The PipeRead changes the pointer to a watch cursor by default during execution. However, some commands, for example xwd, need to take control of the pointer themselves and do not work. To disable the watch cursor, use the command prior to PipeRead

BusyCursor Read off

The PipeRead command executes synchronously. If you want to Exec something, but need the command to run synchronously, you might do something like:

PipeRead 'command 1>&2'

The redirection causes any output from the program to go to stderr instead of being read as a sequence of commands by fvwm. PipeRead returns 1 if the given command could be executed or -1 if not (see the section Conditional Commands for the meaning of return codes).

SetEnv height HEIGHT

makes the FvwmM4 set variable HEIGHT usable by processes started by fvwm as the environment variable $height. If value includes whitespace, you should enclose it in quotes. If no value is given, the variable is deleted.

Another usage of Silent is with binding commands Key, PointerKey and Mouse, this disables error messages.

Silent also disables the error message for non-existent commands. Note: This command is treated as a prefix to its command. Expansion of the command line is done as if Silent was not there.

Examples:

Silent Move 0 0
Silent User_defined_function
# do not complain on keyboards without "Help" key
Silent Key Help R A Popup HelpMenu

AddToFunc InitFunction


 + I Exec exec xterm -geometry 80x64+0+0


 + I Wait xterm


 + I GotoDesk 0 2


 + I Exec exec xmh -font fixed -geometry \


       507x750+0+0


 + I Wait xmh


 + I GotoDesk 0 0

The above function starts an xterm on the current desk, waits for it to map itself, then switches to desk 2 and starts an xmh. After the xmh window appears control moves to desk 0.

Fvwm remains partially functional during a wait, but any input from the modules is queued up and processed only after the window appears or the command is aborted. For example, windows can not be focused with FvwmIconMan or FvwmPager during a wait.

You can escape from a Wait pause by pressing Ctrl-Alt-Escape (where Alt is the first modifier). To redefine this key sequence see the EscapeFunc command.

Any [(conditions)] command

Break [levels]

AddToFunc PickWindowRaiseAndDeiconify
+ I Pick
+ I TestRc (Error) Break
+ I Raise
+ I Iconify off

Current [(conditions)] command

Direction [FromPointer] direction [(conditions)] command

KeepRc command

Next [(conditions)] command

None [(conditions)] command

NoWindow command

Pick [(conditions)] command

PointerWindow [(conditions)] command

Prev [(conditions)] command

ScanForWindow [FromPointer] dir1 dir2 [(conditions)] command

Test [(test-conditions)] command

Test (Version >= 2.5.11) Echo 2.5.11 or later.

AddToFunc StartFunction I Test (Init) Exec exec xterm
AddToFunc VerifyVersion
+ I Test (Version 2.5.*) Echo 2.5.x detected
+ I TestRc (NoMatch) \
	Test (!Version 2.6.*) Echo Future version
+ I TestRc (NoMatch) \
	Echo 2.6.x is detected
Test (F $[FVWM_USERDIR]/local-config) Read local-config
Test (X xterm-utf16) Exec exec xterm-utf16

TestRc [([!]returncode)] command

AddToFunc ToggleXterm
+ I All (my_xtermwindow) Close
+ I TestRc (NoMatch) Exec xterm -T my_xtermwindow

ThisWindow [(conditions)] command

WindowId [id] [(conditions)] | [root [screen]] command

WindowId 0x34567890 Raise
WindowId root 1 WarpToWindow 50 50
WindowId $0 (Silly_Popup) Delete

Pick SetEnv BOOKMARKED_WINDOW $[w.id]
WindowId $[BOOKMARKED_WINDOW] WarpToWindow

In addition, the conditions may include one or more window names to match to. If more than one window name is given, all of them must match. The window name, icon name, class, and resource are considered when attempting to find a match. Each name may include the wildcards '*' and '?', and may consist of two or more alternatives, separated by the character '|', which acts as an OR operator. (If OR operators are used, they must not be separated by spaces from the names.) Each window name can begin with '!', which prevents command if any of the window name, icon name, class or resource match. However, '!' must not be applied to individual names in a group separated by OR operators; it may only be applied to the beginning of the group, and then it operates on the whole group.

Examples:

Next ("Netscape|konqueror|Mozilla*") WarpToWindow 99 90

This goes to the next web browser window, no matter which of the three named web browsers is being used.

Next ("Mozilla*", "Bookmark*") WarpToWindow 99 90

This goes to Mozilla's bookmark manager window, ignoring other Mozilla windows and other browsers' bookmark windows.

All ("XTerm|rxvt", !console) Iconify

This iconifies all the xterm and rxvt windows on the current page, except that the one named "console" (with the -name option to xterm) is excluded.

Next (!"FvwmPager|FvwmForm*|FvwmButtons") Raise
Next (!FvwmPager, !FvwmForm*, !FvwmButtons) Raise

These two commands are equivalent; either one raises the next window which is not one of the named fvwm modules.

Any condition can be negated by using a an exclamation mark ('!') directly in front of its name.

AcceptsFocus, AnyScreen, CirculateHit, CirculateHitIcon, CirculateHitShaded, Closable, CurrentDesk, CurrentGlobalPage, CurrentGlobalPageAnyDesk, CurrentPage, CurrentPageAnyDesk, CurrentScreen, Desk, FixedPosition, FixedSize, Focused, HasHandles, HasPointer, Iconic, Iconifiable, Layer [n], Maximizable, Maximized, Overlapped, PlacedByButton n, PlacedByButton3, PlacedByFvwm, Raised, Shaded, State n, Sticky, StickyAcrossDesks, StickyAcrossPages, StickyIcon, StickyAcrossDesksIcon, StickyAcrossPagesIcon, Transient, Visible.

The AcceptsFocus condition excludes all windows that do not want the input focus (the application has set the "Input hints" for the window to False) and do not use the Lenience option of the Style command. Also, all windows using the NeverFocus style are ignored. Note: !Lenience is equivalent to the deprecated option NoLenience.

With the AnyScreen condition used together with any of the Current... conditions, windows that do not intersect the Xinerama screen containing the mouse pointer are considered for a match too. For example:

# Focus next window on current page,
# regardless of Xinerama screen
Next (CurrentPage, AnyScreen) Focus

The CirculateHit and CirculateHitIcon options override the CirculateSkip and CirculateSkipIcon Style attributes for normal or iconic windows. The CirculateHitShaded option overrides the CirculateSkipShaded Style. All three options are turned on by default for the Current command. They can be turned off by specifying !CirculateHit etc. explicitly. Note: Do not confuse these conditions with the style options of the same name. Specifically,

Style foo CirculateSkip
Next (foo, CirculateHit) ...

is not the same as

Style foo CirculateHit ...
Next (foo)

The prior selects windows with the name foo only in the Next command. In the second example, these windows are always matched in all conditional commands.

The Closable condition matches only windows that are allowed to be closed.

The CurrentDesk condition matches only windows that are on the current desk.

The CurrentGlobalPage condition matches only windows that are on the current page of the current desk, regardless of whether Xinerama support is enabled or not. This condition implicitly activates the CurrentDesk condition.

The CurrentGlobalPageAnyDesk condition matches only windows that are on the current page of any desk, regardless of whether Xinerama support is enabled or not.

The CurrentPage condition matches only windows that are on the current page of the current desk. If Xinerama support is enabled, it only matches windows that are at least partially on the Xinerama screen containing the mouse pointer. This condition implicitly activates the CurrentDesk condition.

The CurrentPageAnyDesk and CurrentScreen conditions matches only windows that are on the current page of any desk. If Xinerama support is enabled, they only match windows that are at least partially on the Xinerama screen containing the mouse pointer.

The Screen [n] condition matches only windows which are on the specified Xinerama screen.

The Desk [n] condition matches only windows which are on the specified desk.

The FixedPosition condition excludes all windows that do not have a fixed position, either set through WM hints or the Style option FixedPosition. Example:

DestroyFunc ToggleFixedGeometry
AddToFunc   ToggleFixedGeometry
+ I Pick (FixedPosition) \
	WindowStyle VariablePosition, VariableSize
+ I TestRc (NoMatch) WindowStyle FixedPosition, FixedSize

The FixedSize condition excludes all windows that do not have a fixed size, either set through WM hints or the Style option FixedSize.

The Focused matches on the window that currently has the keyboard focus. This is not useful for the Current command but can be used with the other conditional commands.

The HasHandles condition excludes all windows that do not have resize handles.

The HasPointer condition excludes all windows that do not contain the pointer.

The Iconic condition matches only iconic windows.

The Iconifiable condition matches only windows that are allowed to be iconified.

The Layer [n] condition matches only windows on the specified layer. The optional argument of the Layer condition defaults to the layer of the focused window. The negation !Layer switches off the Layer condition.

The Maximizable condition matches only windows that are allowed to be maximized.

The Maximized condition matches only maximized windows.

The Fullscreen condition matches only fullscreen windows.

The Overlapped condition matches only windows that are overlapped by other windows on the same layer (or unmanaged windows if the option RaiseOverUnmanaged of the BugOpts command is used). Note that this condition can be slow if you have many windows or if RaiseOverUnmanaged is used and the connection to the X server is slow.

The PlacedByButton n condition is fulfilled if the last interactive motion of the window (with the Move command or as ManualPlacement) was ended by pressing mouse button n. Example:

Mouse   1 T     A       Function MoveWindow
DestroyFunc MoveWindow
AddToFunc MoveWindow
+ C Move
+ C ThisWindow (PlacedByButton 5) WindowShade off
+ C TestRc (Match) Maximize on 0 100
+ C ThisWindow (PlacedByButton 4) WindowShade on

The PlacedByButton3 condition has the same meaning as PlacedByButton 3. It remains only for backward compatibility.

The PlacedByFvwm condition excludes all windows that have been placed manually or by using the user or program position hint.

The Raised conditions matches only windows that are fully visible on the current viewport and not overlapped by any other window.

The Shaded conditions matches only shaded windows (see WindowShade command).

The State n or !State n conditions match only windows with the specified integer state set (or unset). See the State command for details. The argument may range from 0 to 31.

The Sticky, StickyAcrossDesks and StickyAcrossPages match only windows that are currently sticky, sticky across all desks or sticky across all pages. Please refer to the Style options with the same name and the commands Stick, StickAcrossDesks and StickAcrossPages for details.

The StickyIcon, StickyAcrossDesksIcon and StickyAcrossPagesIcon match only windows that become sticky, sticky across all desks or sticky across all pages when they are in iconified state.

The Transient condition matches only windows that have the "transient" property set by the application. This it usually the case for application popup menus and dialogs. The FvwmIdent module can be used to find out whether a specific window is transient.

The Visible condition matches only windows that are at least partially visible on the current viewport and not completely overlapped by other windows.

*<ModuleName>: <Config-Resource>

The new non-conflicting syntax allows a delimiter, a colon and optional spaces between the module name and the rest of the line. In this case a module name (or alias) can't have wildcards.

DestroyModuleConfig FvwmButtons*
DestroyModuleConfig FvwmForm: Fore
DestroyModuleConfig FvwmIconMan: Tips*