Long names¶

GNU troff introduces many new requests; with three exceptions (cp, do, rj), they have names longer than two characters. The names of registers, fonts, strings/macros/diversions, environments, special characters, streams, and colors can be of any length. Anywhere AT&T troff supports a parameterized escape sequence that uses an opening parenthesis “(” to introduce a two-character argument, groff supports a square-bracketed form “[]” where the argument within can be of arbitrary length.

Font families, abstract styles, and translation¶

GNU troff can group text typefaces into families containing each of the styles “R”, “I”, “B”, and “BI”. So that a document need not be coupled to a specific font family, an output device can associate a style in the abstract sense with a mounting position. Thus the default family can be combined with a style dynamically, producing a resolved font name. A document can translate, or remap, fonts with the ftr request.

Applying the requests cs, bd, tkf, uf, or fspecial to an abstract style affects the member of the default family corresponding to that style. The default family can be set with the fam request or -f command-line option. The styles directive in the output device's DESC file controls which mounting positions (if any) are initially associated with abstract styles rather than fonts, and the sty request can update this association.

Colors¶

groff supports color output with a variety of color spaces and up to 16 bits per channel. Some devices, particularly terminals, may be more limited. When color support is enabled, two colors are current at any given time: the stroke color, with which glyphs, rules (lines), and geometric figures are drawn, and the fill color, which paints the interior of filled geometric figures. The color, defcolor, gcolor, and fcolor requests; \m and \M escape sequences; and .color, .m, and .M registers exercise color support.

Fractional type sizes and new scaling units¶

AT&T troff interpreted all type size measurements in points. Combined with integer arithmetic, this design choice made it impossible to support, for instance, ten and a half-point type. In GNU troff, an output device can select a scaling factor that subdivides a point into “scaled points”. A type size expressed in scaled points can thus represent a non-integral type size.

A scaled point is equal to 1/sizescale points, where sizescale is specified in the device description file, DESC, and defaults to 1; see groff_font(5). Requests and escape sequences in GNU troff interpret arguments that represent a type size in points, which the formatter multiplies by sizescale and converts to an integer. Arguments treated in this way comprise those to the escape sequences \H and \s, to the request ps, the third argument to the cs request, and the second and fourth arguments to the tkf request. Scaled points may be specified explicitly with the z scaling unit. In GNU troff, the register \n[.s] can interpolate a non-integral type size. The register \n[.ps] interpolates the type size in scaled points.

For example, if sizescale is 1000, then a scaled point is one thousandth of a point. Consequently, “.ps 10.5” is synonymous with “.ps 10.5z”; both set the type size to 10,500 scaled points, or 10.5 points.

It makes no sense to use the “z” scaling unit in a numeric expression whose default scaling unit is neither “u” nor “z”, so GNU troff disallows this. Similarly, it is nonsensical to use a scaling unit other than “z” or “u” in a numeric expression whose default scaling unit is “z”, so GNU troff disallows this as well.

Another new scaling unit, “s”, multiplies by the number of basic units in a scaled point. Thus, “\n[.ps]s” is equal to “1m” by definition. Do not confuse the “s” and “z” scaling units.

Output devices may be limited in the type sizes they can employ. The .s and .ps registers represent the type size as selected by the output driver as it understands a device's capability. The last requested type size is interpolated in scaled points by the read-only register .psr and in points as a decimal fraction by the read-only string-valued register .sr. Both are associated with the environment. For example, if a type size of 10.95 points is requested, and the nearest size permitted by a sizes request (or by the sizes or sizescale directives in the device's DESC file) is 11 points, the output driver uses the latter value.

A further two new measurement units available in groff are “M”, which indicates hundredths of an em, and “f”, which multiplies by 65,536. The latter provides convenient fractions for color definitions with the defcolor request. For example, 0.5f equals 32768u.

Numeric expressions¶

GNU troff permits spaces in a numeric expression within parentheses, and offers three new operators.

e1>?e2

Interpolate the greater of e1 and e2.

e1<?e2

Interpolate the lesser of e1 and e2.

(c;e)

Evaluate e using c as the default scaling unit, ignoring scaling units in e if c is empty.

Conditional expressions¶

More conditions can be tested with the “if” and ie requests, as well as the new “while” request.

c chr

True if a character chr is available, where chr is an ordinary character (Unicode basic Latin excluding control characters and the space), a special character, or \N'index'.

d nam

True if a string, macro, diversion, or request nam is defined.

F fnt

True if a font fnt is available; fnt can be an abstract style or a font name. fnt is handled as if it were accessed with the ft request (that is, abstract styles and font translation are applied), but fnt cannot be a mounting position, and no font is mounted.

m col

True if a color col is defined.

r reg

True if a register reg is defined.

S sty

True if a style sty is registered. Font translation applies.

v

Always false. This condition is for compatibility with certain other troff implementations only. (This refers to vtroff, a translator that would convert the C/A/T output from early-vintage AT&T troff to a form suitable for Versatec and Benson-Varian plotters.)

Drawing commands¶

GNU troff offers drawing commands to create filled circles and ellipses, and polygons. Stroked (outlined) objects are drawn with the stroke color and filled (solid) ones shaded with the fill color. These are independent properties; if you want a filled, stroked figure, you must draw the same figure twice using each drawing command. A filled figure is always smaller than a stroked one because the former is drawn only within its defined area, whereas strokes have a line thickness (set with another new drawing command, \D't').

Escape sequences¶

groff introduces several new escape sequences and extends the syntax of a few AT&T troff escape sequences (namely, \D, \f, \k, \n, \s, \$, and \*). In the following list, escape sequences are collated alphabetically at first, and then by symbol roughly in Unicode code point order.

\A'anything'

Interpolate 1 if anything is a valid identifier, and 0 otherwise. Because invalid input characters are removed, invalid identifiers are empty or contain spaces, tabs, or newlines. You can employ \A to validate a macro argument before using it to construct another escape sequence or identifier.

\B'anything'

Interpolate 1 if anything is a valid numeric expression, and 0 otherwise. You might use \B along with the “if” request to filter out invalid macro arguments.

\D'C d'

Draw filled circle of diameter d with its leftmost point at the drawing position.

\D'E h v'

Draw filled ellipse with h and v as the axes and the leftmost point at the drawing position.

\D'p h1 v1 ... hn vn'

Draw polygon with vertices at drawing position and each point in sequence. GNU troff closes the polygon by drawing a line from (hn, vn) back to the initial drawing position; DWB and Heirloom troffs do not. Afterward, the drawing position is left at (hn, vn).

\D'P h1 v1 ... hn vn'

As \D'p', but the polygon is filled.

\D't n'

Set line thickness of geometric objects to to n basic units. A zero n selects the minimal supported thickness. A negative n selects a thickness proportional to the type size; this is the default.

\E

Embed an escape character that is not interpreted in copy mode (compare with \a and \t). You can use it to ease the writing of nested macro definitions. It is also convenient to define strings containing escape sequences that need to work when used in copy mode (for example, as macro arguments), or which will be interpolated at varying macro nesting depths.

\f[font]

Select font, which may be a mounting position, abstract style, or font name, to choose the typeface. \f[] and \fP are synonyms; we recommend the former.

\Ff

\F(fm

\F[family]

Select default font family. \F[] makes the previous font family the default. \FP is unlike \fP; it selects font family “P” as the default. See the fam request below.

\k(rg

\k[reg]

Mark horizontal drawing position in two-character register name rg or arbitrary register name reg.

\mc

\m(cl

\m[col]

Set the stroke color. \m[] restores the previous stroke color, or the default if there is none.

\Mc

\M(cl

\M[col]

Set the fill color. \M[] restores the previous fill color, or the default if there is none.

\n[reg]

Interpolate register reg.

\On

\O[n]

Suppress troff output of glyphs and geometric objects. The sequences \O2, \O3, \O4, and \O5 are intended for internal use by grohtml(1).

\R'name ±n'

Synonymous with “.nr name ±n”.

\s[±n]

\s±[n]

\s'±n'

\s±'n'

Set the type size to, or increment or decrement it by, n scaled points.

\Ve

\V(ev

\V[env]

Interpolate contents of the environment variable env, as returned by getenv(3). \V is interpreted even in copy mode.

\X'anything'

Within \X arguments, the escape sequences \&, \), \%, and \: are ignored; \space and \~ are converted to single space characters; and \\ is reduced to \. So that the basic Latin subset of the Unicode character set (that is, ISO 646:1991-IRV or, popularly, “US-ASCII”) can be reliably encoded in anything, the special character escape sequences \-, \[aq], \[dq], \[ga], \[ha], \[rs], and \[ti] are mapped to basic Latin characters; see groff_char(7). For this transformation, character translations and definitions are ignored. Other escape sequences are not supported.

If the use_charnames_in_special directive appears in the output device's DESC file, the use of special character escape sequences is not an error; they are simply output verbatim (with the exception of the seven mapped to Unicode basic Latin characters, discussed above). use_charnames_in_special is currently employed only by grohtml(1).

\Ym

\Y(ma

\Y[mac]

Interpolate a macro as a device control command. This is similar to \X'\*[mac]', except the contents of mac are not interpreted, and mac can be a macro and thus contain newlines, whereas the argument to \X cannot. This inclusion of newlines requires an extension to the AT&T troff output format, and will confuse postprocessors that do not know about it.

\Z'anything'

Save the drawing position, format anything, then restore it. Tabs and leaders in the argument are ignored with an error diagnostic.

\#

Everything up to and including the next newline is ignored. This escape sequence is interpreted even in copy mode. \# is like \", except that \" does not ignore a newline; the latter therefore cannot be used by itself for a whole-line comment—it leaves a blank line on the input stream.

\$0

Interpolate the name by which the macro being interpreted was called. In GNU troff this name can vary; see the als request.

\$(nn

\$[nnn]

In a macro or string definition, interpolate the nnth or nnnth argument. Macros and strings can have an unlimited number of arguments.

\$*

In a macro or string definition, interpolate the catenation of all arguments, separated by spaces.

\$@

In a macro or string definition, interpolate the catenation of all arguments, with each surrounded by double quotes and separated by spaces.

\$^

In a macro or string definition, interpolate the catenation of all arguments constructed in a form suitable for passage to the ds request.

\)

Interpolate a transparent dummy character—one that is ignored by end-of-sentence detection. It behaves as \&, except that \& is treated as letters and numerals normally are after “.”, “?”, and “!”; \& cancels end-of-sentence detection, and \) does not.

\*[string [arg ...]]

Interpolate string, passing it arg ... as arguments.

\/

Apply an italic correction: modify the spacing of the preceding glyph so that the distance between it and the following glyph is correct if the latter is of upright shape. For example, if an italic “f” is followed immediately by a roman right parenthesis, then in many fonts the top right portion of the “f” overlaps the top left of the right parenthesis, which is ugly. Inserting \/ between them avoids this problem. Use this escape sequence whenever an oblique glyph is immediately followed by an upright glyph without any intervening space.

\,

Apply a left italic correction: modify the spacing of the following glyph so that the distance between it and the preceding glyph is correct if the latter is of upright shape. For example, if a roman left parenthesis is immediately followed by an italic “f”, then in many fonts the bottom left portion of the “f” overlaps the bottom of the left parenthesis, which is ugly. Inserting \, between them avoids this problem. Use this escape sequence whenever an upright glyph is followed immediately by an oblique glyph without any intervening space.

\:

Insert a non-printing break point. That is, a word can break there, but the soft hyphen character does not mark the break point if it does (in contrast to “\%”). This escape sequence is an input word boundary, so the remainder of the word is subject to hyphenation as normal.

\?anything\?

When used in a diversion, this transparently embeds anything in the diversion. anything is read in copy mode. When the diversion is reread, anything is interpreted. anything may not contain newlines; use \! if you want to embed newlines in a diversion. The escape sequence \? is also recognized in copy mode and becomes an internal code; it is this code that terminates anything. Thus

prints 4.

\[char]

Typeset the special character char.

\[base-char combining-component ...]

Typeset a composite glyph consisting of base-char overlaid with one or more combining-components. For example, “\[A ho]” is a capital letter “A” with a “hook accent” (ogonek). See the composite request below; Groff: The GNU Implementation of troff, the groff Texinfo manual, for details of composite glyph name construction; and groff_char(7) for a list of components used in composite glyph names.

\~

Insert an unbreakable space that is adjustable like an ordinary space. It is discarded from the end of an output line if a break is forced.

Restricted requests¶

To mitigate risks from untrusted input documents, the pi and sy requests are disabled by default. troff(1)'s -U option enables the formatter's “unsafe mode”, restoring their function (and enabling additional groff extension requests, open, opena, and pso).

New requests¶

.aln new old

Create alias new for existing register named old, causing the names to refer to the same stored value. If old is undefined, a warning in category “reg” is generated and the request is ignored. To remove a register alias, invoke rr on its name. A register's contents do not become inaccessible until it has no more names.

.als new old

Create alias new for existing request, string, macro, or diversion named old, causing the names to refer to the same stored object. If old is undefined, a warning in category “mac” is produced, and the request is ignored. The “am”, “as”, da, de, di, and ds requests (together with their variants) create a new object only if the name of the macro, diversion, or string is currently undefined or if it is defined as a request; normally, they modify the value of an existing object. To remove an alias, invoke rm on its name. The object itself is not destroyed until it has no more names.

When a request, macro, string, or diversion is aliased, redefinitions and appendments “write through” alias names. To replace an alias with a separately defined object, you must use the rm request on its name first.

.am1 name [end-name]

As “am”, but compatibility mode is disabled while the appendment to name is interpreted: a “compatibility save” token is inserted at its beginning, and a “compatibility restore” token at its end. As a consequence, the requests “am”, am1, de, and de1 can be intermixed freely since the compatibility save/restore tokens affect only the parts of the macro populated by am1 and de1.

.ami name [end-name]

Append to macro indirectly. See dei below.

.ami1 name [end-name]

As ami, but compatibility mode is disabled during interpretation of the appendment.

.as1 name [contents]

As “as”, but compatibility mode is disabled while the appendment to name is interpreted: a “compatibility save” token is inserted at the beginning of contents, and a “compatibility restore” token after it. As a consequence, the requests “as”, as1, ds, and ds1 can be intermixed freely since the compatibility save/restore tokens affect only the portions of the strings populated by as1 and ds1.

.asciify div

Unformat the diversion div in a way such that Unicode basic Latin (ASCII) characters, characters translated with the trin request, space characters, and some escape sequences, that were formatted in the diversion div are treated like ordinary input characters when div is reread. Doing so can be useful in conjunction with the writem request. asciify can be also used for gross hacks; for example, the following sets register n to 1.

asciify cannot return all items in a diversion to their source equivalent: nodes such as those produced by \N[...] will remain nodes, so the result cannot be guaranteed to be a pure string. See section “Copy mode” in groff(7). Glyph parameters such as the type face and size are not preserved; use unformat to achieve that.

.backtrace

Write backtrace of input stack to the standard error stream. See the -b option of troff(1).

.blm [name]

Set a blank line macro (trap). If a blank line macro is thus defined, groff executes macro when a blank line is encountered in the input file, instead of the usual behavior. A line consisting only of spaces is also treated as blank and subject to this trap. If no argument is supplied, the default blank line behavior is (re-)established.

.box [name]

.boxa [name]

Divert (or append) output to name, similarly to the di and da requests, respectively. Any pending output line is not included in the diversion. Without an argument, stop diverting output; any pending output line inside the diversion is discarded.

.break

Exit a “while” loop. Do not confuse this request with a typographical break or the br request. See “continue”.

.brp

Break and adjust line; this is the AT&T troff escape sequence \p in request form.

.cflags n c1 c2 ...

Assign properties encoded by the number n to characters c1, c2, and so on. Ordinary and special characters have certain associated properties. (Glyphs don't: to GNU troff, like AT&T device-independent troff, a glyph is an identifier corresponding to a rectangle with some metrics; see groff_font(5).) The first argument is the sum of the desired flags and the remaining arguments are the characters to be assigned those properties. Spaces between the cn arguments are optional. Any argument cn can be a character class defined with the class request rather than an individual character.

The non-negative integer n is the sum of any of the following. Some combinations are nonsensical, such as “33” (1 + 32).

.cflags 68 \[en]

In contrast to values 2 and 4, the values 128, 256, and 512 work pairwise. If, for example, the left character has value 512, and the right character 128, no break will be automatically inserted between them. If we use value 6 instead for the left character, a break after the character can't be suppressed since the neighboring character on the right doesn't get examined.

.char c contents

Define the ordinary or special character c as contents, which can be empty. More precisely, char defines a groff object (or redefines an existing one) that is accessed with the name c on input, and produces contents on output. Every time c is to be formatted, contents is processed in a temporary environment and the result is wrapped up into a single object. Compatibility mode is turned off and the escape character is set to \ while contents is processed. Any emboldening, constant spacing, or track kerning is applied to this object as a whole, not to each character in contents.

An object defined by this request can be used just like a glyph provided by the output device. In particular, other characters can be translated to it with the tr request; it can be made the tab or leader fill character with the tc and lc requests; sequences of it can be drawn with the \l and \L escape sequences; and, if the hcode request is used on c, it is subject to automatic hyphenation.

To prevent infinite recursion, occurrences of c within its own definition are treated normally (as if it were not being defined with char). The tr and trin requests take precedence if char both apply to c. A character definition can be removed with the rchar request.

.chop object

Remove the last character from the macro, string, or diversion object. This is useful for removing the newline from the end of a diversion that is to be interpolated as a string. This request can be used repeatedly on the same object; see section “gtroff Internals” in Groff: The GNU Implementation of troff, the groff Texinfo manual, for discussion of nodes inserted by groff.

.class name c1 c2 ...

Define a character class (or simply “class”) name comprising the characters or range expressions c1, c2, and so on.

A class thus defined can then be referred to in lieu of listing all the characters within it. Currently, only the cflags request can handle references to character classes.

In the request's simplest form, each cn is a character (or special character).

.class [quotes] ' \[aq] \[dq] \[oq] \[cq] \[lq] \[rq]

Since class and special character names share the same name space, we recommend starting and ending the class name with “[” and “]”, respectively, to avoid collisions with existing character names defined by groff or the user (with char and related requests). This practice applies the presence of “]” in the class name to prevent the usage of the special character escape form “\[...]”, thus you must use the \C escape to access a class with such a name.

You can also use a character range expression consisting of a start character followed by “-” and then an end character. Internally, GNU troff converts these two character names to Unicode code points (according to the groff glyph list [GGL]), which determine the start and end values of the range. If that fails, the class definition is skipped. Furthermore, classes can be nested.

.class [prepunct] , : ; > }
.class [prepunctx] \C'[prepunct]' \[u2013]-\[u2016]

If you want to include “-” in a class, it must be the first character value in the argument list, otherwise it gets misinterpreted as part of the range syntax.

It is not possible to use class names as end points of range definitions.

A typical use of the class request is to control line-breaking and hyphenation rules as defined by the cflags request. For example, to inhibit line breaks before the characters belonging to the “[prepunctx]” class defined in the previous example, you can write the following.

.cflags 2 \C'[prepunctx]'

.close stream

Close the stream named stream, invalidating it as an argument to the write request. See open.

.composite c1 c2

Map character name c1 to character name c2 when c1 is a combining component in a composite glyph. Typically, this remaps a spacing glyph to a combining one.

.continue

Skip the remainder of a “while” loop's body, immediately starting the next iteration. See break.

.color n

If n is non-zero or missing, enable colors (the default), otherwise disable them.

.cp n

If n is non-zero or missing, enable compatibility mode, otherwise disable it. In compatibility mode, long names are not recognized, and the incompatibilities they cause do not arise.

.defcolor ident scheme color-component 

... Define a color named ident. scheme identifies a color space and determines the number of required color-components; it must be one of “rgb” (three components), “cmy” (three components), “cmyk” (four components), or “gray” (one component). “grey” is accepted as a synonym of “gray”. The color components can be encoded as a hexadecimal value starting with # or ##. The former indicates that each component is in the range 0–255 (0–FF), the latter the range 0–65535 (0–FFFF). Alternatively, each color component can be specified as a decimal fraction in the range 0–1, interpreted using a default scaling unit of “f”, which multiplies its value by 65,536 (but clamps it at 65,535).

Each output device has a color named “default”, which cannot be redefined. A device's default stroke and fill colors are not necessarily the same.

.de1 name [end-name]

Define a macro to be interpreted with compatibility mode disabled. When name is called, compatibility mode enablement status is saved; it is restored when the call completes.

.dei name [end-name]

Define macro indirectly, with the name of the macro to be defined in string name and the name of the end macro terminating its definition in string end-name.

.dei1 name [end-name]

As dei, but compatibility mode is disabled while the definition of the macro named in string name is interpreted.

.device anything

Write anything, read in copy mode, to troff output as a device control command. An initial neutral double quote is stripped to allow the embedding of leading spaces.

.devicem name

Write contents of macro or string name to troff output as a device control command.

.do name [arg ...]

Interpret the string, request, diversion, or macro name (along with any arguments) with compatibility mode disabled. Compatibility mode is restored (only if it was active) when the expansion of name is interpreted; that is, the restored compatibility state applies to the contents of the macro, string, or diversion name as well as data read from files or pipes if name is any of the so, soquiet, mso, msoquiet, or pso requests.

For example,

.de mac1
FOO
..
.de1 mac2
groff
.mac1
..
.de mac3
compatibility
.mac1
..
.de ma
\\$1
..
.cp 1
.do mac1
.do mac2 \" mac2, defined with .de1, calls "mac1"
.do mac3 \" mac3 calls "ma" with argument "c1"
.do mac3 \[ti] \" groff syntax accepted in .do arguments

FOO groff FOO compatibility c1 ~

.ds1 name contents

As ds, but compatibility mode is disabled while name is interpreted: a “compatibility save” token is inserted at the beginning of contents, and a “compatibility restore” token after it.

.ecr

Restore the escape character saved with ecs, or set escape character to “\” if none has been saved.

.ecs

Save the current escape character.

.evc env

Copy the properties of environment env to the current environment, except for the following data.

.fam [family]

Set default font family to family. If no argument is given, the previous font family is selected, or the formatter's default family if there is none. The formatter's default font family is “T” (Times), but it can be overridden by the output device—see groff_font(5). The default font family is associated with the environment. See \F.

.fchar c contents

Define fallback character c as contents. The syntax of this request is the same as the char request; the difference is that a character defined with char hides a glyph with the same name in the selected font, whereas characters defined with fchar are checked only if c isn't found in the selected font. This test happens before special fonts are searched.

.fcolor color

Set the fill color to color. Without an argument, the previous fill color is selected.

.fschar f c contents

Define fallback special character c for font f as contents. A character defined by fschar is located after the list of fonts declared with fspecial is searched but before those declared with the “special” request.

.fspecial f s1 s2 ...

When font f is selected, fonts s1, s2, ... are treated as special; that is, they are searched for glyphs not found in f. Any fonts specified in the “special” request are searched after s1, s2, and so on. Without s arguments, fspecial clears the list of fonts treated as special when f is selected.

.ftr f g

Translate font f to g. Whenever a font named f is referred to in an \f escape sequence, in the F and S conditional expression operators, or in the ft, ul, bd, cs, tkf, special, fspecial, fp, or sty requests, font g is used. If g is missing or identical to f, then font f is not translated.

.fzoom f zoom

Set zoom factor zoom for font f. zoom must a non-negative integer multiple of 1/1000th. If it is missing or is equal to zero, it means the same as 1000, namely no magnification. f must be a resolved font name, not an abstract style.

.gcolor color

Set the stroke color to color. Without an argument, the previous stroke color is selected.

.hcode c1 code1 [c2 code2] ...

Set the hyphenation code of character c1 to code1, that of c2 to code2, and so on. A hyphenation code must be an ordinary character (not a special character escape sequence) other than a digit. The request is ignored if given no arguments.

For hyphenation to work, hyphenation codes must be set up. At startup, groff assigns hyphenation codes to the letters “a–z” (mapped to themselves), to the letters “A–Z” (mapped to “a–z”), and zero to all other characters. Normally, hyphenation patterns contain only lowercase letters which should be applied regardless of case. In other words, they assume that the words “ABBOT” and “Abbot” should be hyphenated exactly as “abbot” is. hcode extends this principle to letters outside the Unicode basic Latin alphabet; without it, words containing such letters won't be hyphenated properly even if the corresponding hyphenation patterns contain them.

.hla lang

Set the hyphenation language to lang. Hyphenation exceptions specified with the hw request and hyphenation patterns and exceptions specified with the hpf and hpfa requests are associated with the hyphenation language. The hla request is usually invoked by a localization file, which is in turn loaded by the troffrc or troffrc-end file; see the hpf request below. The hyphenation language is associated with the environment.

.hlm [n]

Set the maximum number of consecutive hyphenated lines to n. If n is negative, there is no maximum. If omitted, n is -1. This value is associated with the environment. Only lines output from a given environment count towards the maximum associated with that environment. Hyphens resulting from \% are counted; explicit hyphens are not.

.hpf pattern-file

Read hyphenation patterns from pattern-file. This file is sought in the same way that macro files are with the mso request or the -mname command-line option to groff(1) and troff(1).

The pattern-file should have the same format as (simple) TeX pattern files. The following scanning rules are implemented.

Use the hpfcode request (see below) to map the encoding used in hyphenation pattern files to groff's input encoding.

The set of hyphenation patterns is associated with the hyphenation language set by the hla request. The hpf request is usually invoked by a localization file loaded by the troffrc file. By default, troffrc loads the localization file for English. (As of groff 1.23.0, localization files for Czech (cs), German (de), English (en), French (fr), Japanese (ja), Swedish (sv), and Chinese (zh) exist.) For Western languages, the localization file sets the hyphenation mode and loads hyphenation patterns and exceptions.

A second call to hpf (for the same language) replaces the old patterns with the new ones.

Invoking hpf causes an error if there is no hyphenation language.

If no hpf request is specified (either in the document, in a file loaded at startup, or in a macro package), GNU troff won't automatically hyphenate at all.

.hpfa pattern-file

As hpf, except that the hyphenation patterns and exceptions from pattern-file are appended to the patterns already applied to the hyphenation language of the environment.

.hpfcode a b [c d] ...

Define mapping values for character codes in pattern files. This is an older mechanism no longer used by groff's own macro files; for its successor, see hcode above. hpf or hpfa apply the mapping after reading or appending to the active list of patterns. Its arguments are pairs of character codes—integers from 0 to 255. The request maps character code a to code b, code c to code d, and so on. Character codes that would otherwise be invalid in groff can be used. By default, every code maps to itself except those for letters “A” to “Z”, which map to those for “a” to “z”.

.hym [length]

Set the (right) hyphenation margin to length. If the adjustment mode is not “b” or “n”, the line is not hyphenated if it is shorter than length. Without an argument, the default hyphenation margin is reset to its default value, 0. The default scaling unit is “m”. The hyphenation margin is associated with the environment. A negative argument resets the hyphenation margin to zero, emitting a warning in category “range”.

.hys [hyphenation-space]

Suppress hyphenation of the line in adjustment modes “b” or “n”, if it can be justified by adding no more than hyphenation-space extra space to each inter-word space. Without an argument, the hyphenation space adjustment threshold is set to its default value, 0. The default scaling unit is “m”. The hyphenation space adjustment threshold is associated with the current environment. A negative argument resets the hyphenation space adjustment threshold to zero, emitting a warning in category “range”.

.itc n name

As “it”, but lines interrupted with the \c escape sequence are not applied to the line count.

.kern n

If n is non-zero or missing, enable pairwise kerning (the default), otherwise disable it.

.length reg anything

Compute the number of characters in anything and return the count in the register reg. If reg doesn't exist, it is created. anything is read in copy mode.

.linetabs n

.ds x a\t\c
.ds y b\t\c
.ds z c
.ta 1i 3i
\*x
\*y
\*z

a         b         c

a         b                   c

.lsm [name]

Set the leading space macro (trap) to name. If there are leading space characters on an input line, name is invoked in lieu of the usual roff behavior; the leading spaces are removed. The count of leading spaces on an input line is stored in \n[lsn], and the amount of corresponding horizontal motion in \n[lss], irrespective of whether a leading space trap is set. When it is, the leading spaces are removed from the input line, and no motion is produced before calling name. If no argument is supplied, the default leading space behavior is (re-)established.

.mso file

As “so”, except that file is sought in the same directories as arguments to the groff(1) and troff(1) -m command-line option are (the “tmac path”). If the file name to be interpolated has the form name.tmac and it isn't found, mso tries to include tmac.name instead and vice versa. If file does not exist, a warning in category “file” is emitted and the request has no other effect.

.msoquiet file

As mso, but no warning is emitted if file does not exist.

.nop anything

Interpret anything as if it were an input line. nop resembles “.if 1”; it puts a break on the output if anything is empty. Unlike “if”, it cannot govern conditional blocks. Its application is to maintain consistent indentation within macro definitions even when producing text lines.

.nroff

Make the n conditional expression evaluate true and t false. See troff.

.open stream file

Open file for writing and associate stream with it. See write and close.

.opena stream file

As open, but if file exists, append to it instead of truncating it.

.output contents

Emit contents, which are read in copy mode, to the formatter output; this is similar to \! used in the top-level diversion. An initial neutral double quote in contents is stripped to allow the embedding of leading spaces.

.pev

Report the state of the current environment followed by that of all other environments to the standard error stream.

.pnr

Write the names and values of all currently defined registers to the standard error stream.

.psbb file

Get the bounding box of a PostScript image file. This file must conform to Adobe's Document Structuring Conventions; the request attempts to extract the bounding box values from a %%BoundingBox comment. After invocation, the x and y coordinates (in PostScript units) of the lower left and upper right corners can be found in the registers \n[llx], \n[lly], \n[urx], and \n[ury], respectively. If an error occurs, these four registers are set to zero.

.pso command

As “so”, except that input comes from the standard output stream of command.

.ptr

Report the names and vertical positions of all page location traps to the standard error stream. Empty slots in the list are shown as well, because they can affect the visibility of subsequently planted traps.

.pvs ±n

Set the post-vertical line spacing to n; default scaling unit is “p”. With no argument, the post-vertical line space is set to its previous value.

In GNU troff, the distance between text baselines consists of the extra pre-vertical line spacing set by the most negative \x argument on the pending output line, the vertical spacing (vs), the extra post-vertical line spacing set by the most positive \x argument on the pending output line, and the post-vertical line spacing set by this request.

.rchar c ...

Remove definition of each ordinary or special character c, undoing the effect of a char, fchar, or schar request. Glyphs, which are defined by font description files, cannot be removed. Spaces and tabs may separate c arguments.

.return

Within a macro, return immediately. If called with an argument, return twice, namely from the current macro and from the macro one level higher. No effect otherwise.

.rfschar f c ...

Remove each fallback special character c for font f. Spaces and tabs may separate c arguments. See fschar.

.rj [n]

Right-align the next n input lines. Without an argument, right-align the next input line. rj implies “.ce 0”, and ce implies “.rj 0”.

.rnn r1 r2

Rename register r1 to r2. If r1 doesn't exist, the request is ignored.

.schar c contents

Define global fallback character c as contents. See char; the distinction is that a character defined with schar is located after the list of fonts declared with the special request but before any mounted special fonts.

.shc [c]

Set the soft hyphen character, inserted when a word is hyphenated automatically or at a hyphenation character, to c. If c is omitted, the soft hyphen character is set to the default, \[hy]. If the selected glyph does not exist in the font in use at a potential hyphenation point, then the line is not broken at that point. Neither character definitions (char and similar) nor translations (tr and similar) are considered when assigning the soft hyphen character.

.shift n

In a macro, shift the arguments by n positions: argument i becomes argument i-n; arguments 1 to n are no longer available. If n is missing, arguments are shifted by 1. No effect otherwise.

.sizes s1 s2 ... sn [0]

Set the available type sizes to s1, s2, ... sn scaled points. The list of sizes can be terminated by an optional “0”. Each si can also be a range m–n. In contrast to the device description file directive of the same name (see groff_font(5)), the argument list can't extend over more than one line.

.soquiet file

As “so”, but no warning is emitted if file does not exist.

.special f ...

Declare each font f as special, searching it for glyphs not found in the selected font. Without arguments, this list of special fonts is made empty.

.spreadwarn [limit]

Emit a break warning if the additional space inserted for each space between words in an output line adjusted to both margins with “.ad b” is larger than or equal to limit. A negative value is treated as zero; an absent argument toggles the warning on and off without changing limit. The default scaling unit is m. At startup, spreadwarn is inactive and limit is 3 m.

For example, “.spreadwarn 0.2m” causes a warning if break warnings are not suppressed and troff must add 0.2 m or more for each inter-word space in a line.

.stringdown str

.stringup str

Alter the string named str by replacing each of its bytes with its lowercase (down) or uppercase (up) version (if one exists). Special characters (see groff_char(7)) will often transform in the expected way due to the regular naming convention for accented characters. When they do not, use substrings and/or catenation.

.ds resume R\['e]sum\['e]\"
\*[resume]
.stringdown resume
\*[resume]
.stringup resume
\*[resume]
Résumé résumé RÉSUMÉ

.sty n s

Associate abstract style s with font mounting position n.

.substring string start [end]

Replace the string named string with its substring bounded by the indices start and end, inclusively. The first character in the string has index 0. If end is omitted, it is implicitly set to the largest valid value (the string length minus one). Negative indices count backwards from the end of the string: the last character has index -1, the character before the last has index -2, and so on.

.tkf f s1 n1 s2 n2

Enable track kerning for font f. When the current font is f the width of every glyph is increased by an amount between n1 and n2; when the current type size is less than or equal to s1 the width is increased by n1; when it is greater than or equal to s2 the width is increased by n2; when the type size is greater than or equal to s1 and less than or equal to s2 the increase in width is a linear function of the type size.

.tm1 message

As tm request, but strips a leading neutral double quote from message to allow the embedding of leading spaces.

.tmc message

As tm1 request, but does not append a newline.

.trf file

Transparently output the contents of file file. Each line is output as if preceded by \!; however, the lines are not subject to copy-mode interpretation. If the file does not end with a newline, then a newline is added. Unlike cf, file cannot contain characters that are invalid as input to GNU troff.

For example, you can define a macro x containing the contents of file f, using

.trin abcd

This is the same as the tr request except that the asciify request uses the character code (if any) before the character translation. Example:

The result is “x a”. Using tr, the result would be “x x”.

.trnt abcd

This is the same as the tr request except that the translations do not apply to text that is transparently throughput into a diversion with \!. For example,

prints b; if trnt is used instead of tr it prints a.

.troff

Make the t conditional expression evaluate true and n false. See nroff.

.unformat div

Unformat the diversion div. Unlike asciify, unformat handles only tabs and spaces between words, the latter usually arising from spaces or newlines in the input. Tabs are treated as input tokens, and spaces become adjustable again. The vertical sizes of lines are not preserved, but glyph information (font, type size, space width, and so on) is retained.

.vpt n

If n is non-zero or missing, enable vertical position traps (the default), otherwise disable them. Vertical position traps are those set by the ch, wh, and dt requests.

.warn [n]

Select the categories, or “types”, of reported warnings. n is the sum of the numeric codes associated with each warning category that is to be enabled; all other categories are disabled. The categories and their associated codes are listed in section “Warnings” of troff(1). For example, “.warn 0” disables all warnings, and “.warn 1” disables all warnings except those about missing glyphs. If no argument is given, all warning categories are enabled.

.warnscale si

Set the scaling unit used in warnings to si. Valid values for si are u, i (the default), c, p, and P.

.while cond-expr anything

Evaluate the conditional expression cond-expr, and repeatedly execute anything unless and until cond-expr evaluates false. anything, which is often a conditional block, is referred to as the while request's body.

troff treats the body of a while request similarly to that of a de request (albeit one not read in copy mode), but stores it under an internal name and deletes it when the loop finishes. The operation of a macro containing a while request can slow significantly if the while body is large. Each time the macro is executed, the while body is parsed and stored again. An often better solution—and one that is more portable, since AT&T troff lacked the while request—is to instead write a recursive macro. It will be parsed only once (unless you redefine it). To prevent infinite loops, the default number of available recursion levels is 1,000 or somewhat less (because things other than macro calls can be on the input stack). You can disable this protective measure, or raise the limit, by setting the slimit register. See section “Debugging” below.

If a while body begins with a conditional block, its closing brace must end an input line.

The break and continue requests alter a while loop's flow of control.

.write stream anything

Write anything to stream, which must previously have been the subject of an open request, followed by a newline. anything is read in copy mode. An initial neutral double quote in anything is stripped to allow the embedding of leading spaces.

.writec stream anything

As write, but without a trailing newline.

.writem stream name

Write the contents of the macro or string name to stream, which must previously have been the subject of an open request. name is read in copy mode.

Extended requests¶

.cf file

In a diversion, embed an object which, when reread, will cause the contents of file to be copied verbatim to the output. In AT&T troff, the contents of file are immediately copied to the output regardless of whether a diversion is being written to; this behavior is so anomalous that it must be considered a bug.

.de name [end-name]

.am name [end-name]

.ds name [contents]

.as name [contents]

In compatibility mode, these requests behave similarly to de1, am1, ds1, and as1, respectively: a “compatibility save” token is inserted at the beginning, and a “compatibility restore” token at the end, with compatibility mode switched on during execution.

.hy n

New values 16 and 32 are available; the former enables hyphenation before the last character in a word, and the latter enables hyphenation after the first character in a word.

.ss word-space-size [additional-sentence-space-size]

A second argument sets the amount of additional space separating sentences on the same output line. If omitted, this amount is set to word-space-size. Both arguments are in twelfths of current font's space width (typically one-fourth to one-third em for Western scripts; see groff_font(5)). The default for both parameters is 12. Negative values are erroneous.

.ta [[n1 n2 ... nn ]T r1 r2 ... rn]

groff supports an extended syntax to specify repeating tab stops after the “T” mark. These values are always taken as relative distances from the previous tab stop. This is the idiomatic way to specify tab stops at equal intervals in groff.

The syntax summary above instructs groff to set tabs at positions n1, n2, ..., nn, then at nn+r1, nn+r2, ..., nn+rn, then at nn+rn+r1, nn+rn+r2, ..., nn+rn+rn, and so on.

New registers¶

GNU troff exposes more formatter state via many new read-only registers. Their names often correspond to the requests that affect them.

\n[.br]

Within a macro call, interpolate 1 if the macro is called with the “normal” control character (“.” by default), and 0 otherwise. This facility allows the reliable modification of requests. Using this register outside of a macro definition makes no sense.

\n[.C]

Interpolate 1 if compatibility mode is in effect, 0 otherwise. See cp.

\n[.cdp]

Interpolate depth of last glyph added to the environment. It is positive if the glyph extends below the baseline.

\n[.ce]

Interpolate number of input lines remaining to be centered.

\n[.cht]

Interpolate height of last glyph added to the environment. It is positive if the glyph extends above the baseline.

\n[.color]

Interpolate 1 if colors are enabled, 0 otherwise.

\n[.cp]

Within a “do” request, interpolate the saved value of compatibility mode (see \n[.C] above).

\n[.csk]

Interpolate skew of last glyph added to the environment. The skew of a glyph is how far to the right of the center of a glyph the center of an accent over that glyph should be placed.

\n[.ev]

Interpolate name of current environment. This is a string-valued register.

\n[.fam]

Interpolate name of default font family. This is a string-valued register.

\n[.fn]

Interpolate resolved name of the selected font. This is a string-valued register.

\n[.fp]

Interpolate next free font mounting position.

\n[.g]

Interpolate 1. Test with “if” or ie to check whether GNU troff is the formatter.

\n[.height]

Interpolate font height. See \H.

\n[.hla]

Interpolate hyphenation language of the environment. This is a string-valued register.

\n[.hlc]

Interpolate count of immediately preceding consecutive hyphenated lines in the environment.

\n[.hlm]

Interpolate maximum number of consecutive hyphenated lines allowed in the environment.

\n[.hy]

Interpolate hyphenation mode of the environment.

\n[.hym]

Inteprolate hyphenation margin of the environment.

\n[.hys]

Interpolate hyphenation space adjustment threshold of the environment.

\n[.in]

Interpolate indentation amount applicable to the pending output line.

\n[.int]

Interpolate 1 if the previous output line was interrupted (ended with \c), 0 otherwise.

\n[.kern]

Interpolate 1 if pairwise kerning is enabled, 0 otherwise.

\n[.lg]

Interpolate ligature mode.

\n[.linetabs]

Interpolate 1 if line-tabs mode is enabled, 0 otherwise.

\n[.ll]

Interpolate line length applicable to the pending output line.

\n[.lt]

Interpolate title line length.

\n[.m]

Interpolate name of the selected stroke color. This is a string-valued register.

\n[.M]

Interpolate name of the selected fill color. This is a string-valued register.

\n[.ne]

Interpolate amount of space demanded by the most recent ne request that caused a page location trap to be sprung. See \n[.trunc].

\n[.nm]

Interpolate 1 if output line numbering is enabled (even if temporarily suppressed), 0 otherwise.

\n[.ns]

Interpolate 1 if no-space mode is enabled, 0 otherwise.

\n[.O]

Interpolate output suppression level. See \O.

\n[.P]

Interpolate 1 if the current page is selected for output. See -o command-line option to troff(1).

\n[.pe]

Interpolate 1 during page ejection, 0 otherwise.

\n[.pn]

Interpolate next page number (either that set by pn, or that of the current page plus 1).

\n[.ps]

Interpolate type size in scaled points.

\n[.psr]

Interpolate most recently requested type size in scaled points.

\n[.pvs]

Interpolate post-vertical line spacing amount.

\n[.rj]

Interpolate number of input lines remaining to be right-aligned.

\n[.slant]

Interpolate font slant. See \S.

\n[.sr]

Interpolate most recently requested type size in points as a decimal fraction. This is a string-valued register.

\n[.ss]

\n[.sss]

Interpolate values of minimal inter-word space and additional inter-sentence space, respectively, in twelfths of the space width of the selected font.

\n[.sty]

Interpolate selected abstract font style, if any. This is a string-valued register.

\n[.tabs]

Interpolate representation of the tab stop settings in a form suitable for passage to the ta request.

\n[.trunc]

Interpolate amount of vertical space truncated by the most recently sprung page location trap, or, if the trap was sprung by an ne request, minus the amount of vertical motion produced by the ne request. In other words, at the point a trap is sprung, \n[.trunc] represents the difference of what the vertical position would have been but for the trap, and what the vertical position actually is. See \n[.ne].

\n[.U]

Interpolate 1 if in unsafe mode, 0 otherwise. See -U command-line option to troff(1).

\n[.vpt]

Interpolate 1 if vertical position traps are enabled, 0 otherwise.

\n[.warn]

Interpolate warning mode. See section “Warnings” of troff(1).

\n[.x]

Interpolate major version number of the running troff formatter. For example, if the version number is 1.23.0, then \n[.x] contains 1.

\n[.y]

Interpolate minor version number of the running troff formatter. For example, if the version number is 1.23.0, then \n[.y] contains 23.

\n[.Y]

Interpolate revision number of the running troff formatter. For example, if the version number is 1.23.0, then \n[.Y] contains 0.

\n[.zoom]

Interpolate magnification of font, in thousandths, or 0 if magnification unused. See fzoom.

The following (writable) registers are set by the psbb request.

\n[llx]

\n[lly]

\n[urx]

\n[ury]

Interpolate the (upper, lower, left, right) bounding box values (in PostScript units) of the most recently processed PostScript image.

The following (writable) registers are set by the \w escape sequence.

\n[rst]

\n[rsb]

Like \n[st] and \n[sb], but taking account of the heights and depths of glyphs. In other words, these registers store the highest and lowest vertical positions attained by the argument formatted by the \w escape sequence, doing what AT&T troff documented \n[st] and \n[sb] as doing.

\n[ssc]

The amount of horizontal space (possibly negative) that should be added to the last glyph before a subscript.

\n[skw]

How far to right of the center of the last glyph in the \w argument, the center of an accent from a roman font should be placed over that glyph.

Other writable registers are as follows. Those relating to date and time are initialized using localtime(3) at formatter startup.

\n[c.]

Interpolate input line number. \n[.c] is a read-only alias of this register.

\n[hours]

Interpolate number of hours elapsed since midnight.

\n[hp]

Interpolate horizontal position relative to that at the start of the input line.

\n[lsn]

\n[lss]

Interpolate count of leading spaces on input line and amount of corresponding horizontal motion, respectively.

\n[minutes]

Interpolate number of minutes elapsed in the hour.

\n[seconds]

Interpolate number of seconds elapsed in the minute.

\n[systat]

Interpolate return value of system(3) function executed by most recent sy request.

\n[slimit]

Interpolates maximum quantity of objects on troff's internal input stack (default: 1000). If non-positive, there is no limit: recursion can continue until program memory is exhausted.

\n[year]

Interpolate Gregorian year. AT&T troff's \[yr] interpolates the Gregorian year minus 1900.

Miscellaneous¶

GNU troff predefines one string, .T, containing the argument given to the -T command-line option, namely the output device (for example, pdf or utf8). The (read-only) register .T interpolates 1 if GNU troff is run with the -T command-line option, and 0 otherwise.

A font not listed in the output device's DESC file's fonts directive is automatically mounted at the next available font position when it is selected. If you mount a font explicitly with the fp request, you should do so on the first unused position, which can be found in the .fp register.

Unparameterized string interpolation does not conceal the arguments to a macro being interpreted. Thus, in a macro definition, the call of another macro with the existing argument list,

.xx \\$@

\\*[xx]\\

If a font description file contains pairwise kerning information, glyphs from that font are kerned. Kerning between two glyphs can be inhibited by placing a dummy character \& between them.

GNU troff keeps track of the nesting depth of escape sequence interpolations and other uses of delimiters, as in the tl request and the output comparison operator (that is, input like 'foo'bar' as a conditional expression), so the only characters you need to avoid using as delimiters are those that appear in the arguments you input, not any that result from interpolation. Typically, ' works fine. Use visible characters as delimiters in GNU troff, not “ASCII” controls like BEL (Control+G). The implementation of \$@ ensures that the double quotes surrounding an argument appear at an interpolation depth different from that of the arguments themselves. Similarly, in bracket-form escape sequences like \f[ZCMI], a right bracket ] does not end the sequence unless it occurs at the same interpolation depth as the opening [, so input like

\f[\*[my-family]\*[my-style]]

In GNU troff, the tr request can map characters to the unbreakable space escape sequence \~ as a special case (tr normally operates only on characters). This feature replaces the odd-parity tr mapping trick used in AT&T troff documents, where a character, often ~, was “sacrificed” by mapping it to “nothing”, drafting it into use as an unadjustable, unbreakable space. (This feature was gratuitous even in early AT&T troff, which supported the \space escape sequence by 1976.) Often, it makes more sense to use GNU troff's \~ escape sequence instead, which has been adopted by every other active troff implementation except that of Illumos, as well as by the non-troff mandoc. Translation of a character to \~ is unnecessary.

GNU troff permits tabs and spaces after the first dot on a control line that ends a macro definition.

.if t \{\
.  de bar
.    nop Hello, I'm 'bar'.
.  .
.\}

Units¶

The argument to the s command is in scaled points (units of points/n, where n is the argument to the sizescale command in the DESC file). The argument to the “x H” command is also in scaled points.

Simple commands¶

If the tcommand directive is present in the output device's DESC file, GNU troff employs the following two commands.

t xyz...

Typeset word xyz; that is, set a sequence of ordinary glyphs named x, y, z, ..., terminated by a space or newline; an optional second integer argument is ignored (this allows the formatter to generate an even number of arguments). Each glyph is set at the current drawing position, and the position is then advanced horizontally by the glyph's width. A glyph's width is read from its metrics in the font description file, scaled to the current type size, and rounded to a multiple of the horizontal motion quantum. Use the C command to emplace glyphs of special characters.

u n xyz...

Typeset word xyz with track kerning. As t, but after placing each glyph, the drawing position is further advanced horizontally by n basic units.

New commands implement color support.

mc cyan magenta yellow

md

mg gray

mk cyan magenta yellow black

mr red green blue

Set the components of the stroke color with respect to various color spaces. md resets the stroke color to the default value. The arguments are integers in the range 0 to 65535.

A new device control subcommand is available.

x u n

If n is 1, start underlining of spaces. If n is 0, stop underlining of spaces. This facility is needed for the cu request in nroff mode and is ignored otherwise.

Extended drawing commands¶

GNU pic does not produce troff escape sequences employing these extensions if its -n option is given.

Df n

Set the shade of gray used to fill geometric objects to n, which must be an integer. 0 corresponds to white and 1000 to black. A grayscale ramp spans the two. A value outside this range uses the stroke color as the fill color. The fill color is opaque. Normally the default is black, but some drivers may provide a way of changing this. Df is obsolete since 2002, superseded by DFg below.

The corresponding \D'f' escape sequence should not be used: its argument is rounded to an integer multiple of the horizontal motion quantum, which can limit the precision of n.

DC d

Draw a filled circle of diameter d with its leftmost point at the drawing position.

DE h v

Draw a filled ellipse, of horizontal axis h and vertical axis v, with its leftmost point at the drawing position.

Dp 

${\mathrm{dx}}_1{\mathrm{dy}}_1\mathrm{ldots}{\mathrm{dx}}_n{\mathrm{dy}}_n$ " Draw a polygon with, for $i=1,\mathrm{ldots},n+1$ , its ith vertex at the drawing position $+\sum _{j=1}^{i-1}({\mathrm{dx}}_j,{\mathrm{dy}}_j)$ . groff output drivers automatically close polygons, drawing a line from $({\mathrm{dx}}_n,{\mathrm{dy}}_n)$ back to $({\mathrm{dx}}_1,{\mathrm{dy}}_1)$ . The drawing position is left at the last specified vertex, but this may change in a future version of GNU troff. Heirloom Doctools troff, like DWB troff, by default does not close the polygon. In its groff compatibility mode, Heirloom closes the polygon but leaves the drawing position unchanged—that is, at the polygon's initial drawing position.

At the moment, GNU pic uses this command only to generate triangles and rectangles.

DP 

${\mathrm{dx}}_1{\mathrm{dy}}_1\mathrm{ldots}{\mathrm{dx}}_n{\mathrm{dy}}_n$ " As Dp, but draw a filled rather than a stroked polygon.

Dt n

Set the line thickness to n basic units. AT&T troff output drivers use a thickness proportional to the type size; this is the GNU troff default. A negative n requests this explicitly. An n of zero selects the smallest available line thickness.

A difficulty arises in how the drawing position should be changed after the execution of these commands. This has little importance to most users, since the output of GNU grn and pic does not depend on it. Given a drawing command of the form Dz $x_1{y}_1\mathrm{ldots}{x}_n{y}_n$ , where z is not c or e, AT&T troff treats each $x_i$ as a horizontal motion, each $y_i$ as a vertical one, and therefore assumes that the width of the drawn object is $\sum _{i=1}^n{x}_i$ , and its height is $\sum _{i=1}^n{y}_i$ . (Verify its assumption about height by examining the st and sb registers after using such a drawing command in a \w escape sequence). For the sake of compatibility, GNU troff also follows this rule, even though it frustrates extensions to the D command that set drawing parameters rather than rendering objects, producing ugly results in the case of Dt and Df, or otherwise don't parameterize objects as a series of vertices, as with GNU troff's filled ellipse, DE. Thus after executing a D command of the form Dz $x_1{y}_1\mathrm{ldots}{x}_n{y}_n$ , the drawing position should be increased by $(\sum _{i=1}^n{x}_i,\sum _{i=1}^n{y}_i)$ . In a future release, GNU troff and its output drivers may abandon the application of this assumption to drawing commands not explicitly specified in the AT&T “Troff User's Manual”.

Fill color selection is implemented with another set of extensions.

DFc cyan magenta yellow

DFd

DFg gray

DFk cyan magenta yellow black

DFr red green blue

Set the components of the fill color as described under the \M escape sequence above. DFd restores the device's default fill color. The drawing position is not updated, in contrast to Df.

Device control syntax extension¶

GNU troff introduces a line continuation convention, permitting the argument to the x X command to contain newlines. A newline in the input is transformed to the sequence “newline+”. When interpreting an x X command, a postprocessor should therefore be prepared for a plus sign after a newline; if it occurs, preserve the newline, discard the plus sign, and continue to collect the input into the argument of the x X command. A newline not followed by a plus sign terminates the x X command. An application of this feature is the embedding of PostScript or PDF language command streams into troff output.

GNU troff guarantees that the first three output commands it emits are as follows.

x T device
x res n h v
x init

Formatter output incompatibilities¶

Its extensions notwithstanding, the groff intermediate output format has some incompatibilities with that of AT&T troff, but better compatibility is sought; problem reports and patches are welcome. The following incompatibilities are known.

•

The drawing position after rendering polygons is inconsistent with AT&T troff practice. Other implementations have diverged on this point as well.

•

The output cannot be easily rescaled to other devices as AT&T troff's could.