Scroll to navigation

OutgoingDataQueue(3) Library Functions Manual OutgoingDataQueue(3)

NAME

OutgoingDataQueue - A generic outgoing RTP data queue supporting multiple destinations.

SYNOPSIS

#include <oqueue.h>

Inherits OutgoingDataQueueBase, and DestinationListHandler.

Inherited by RTPDataQueue.

Classes


struct OutgoingRTPPktLink

Public Member Functions


bool addDestination (const InetHostAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
bool addDestination (const InetMcastAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
bool forgetDestination (const InetHostAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
bool forgetDestination (const InetMcastAddress &ia, tpport_t dataPort=DefaultRTPDataPort, tpport_t controlPort=0)
void addContributor (uint32 csrc)
Add csrc as the CSRC identifier of a new contributor. bool removeContributor (uint32 csrc)
Remove CSRC from the list of contributors. bool isSending () const
Determine if outgoing packets are waiting to send. void putData (uint32 stamp, const unsigned char *data=NULL, size_t len=0)
This is used to create a data packet in the send queue. void sendImmediate (uint32 stamp, const unsigned char *data=NULL, size_t len=0)
This is used to create a data packet and send it immediately. void setPadding (uint8 paddinglen)
Set padding. void setMark (bool mark)
Set marker bit for the packet in which the next data provided will be send. bool getMark () const
Get whether the mark bit will be set in the next packet. size_t setPartial (uint32 timestamp, unsigned char *data, size_t offset, size_t max)
Set partial data for an already queued packet. microtimeout_t getDefaultSchedulingTimeout () const
void setSchedulingTimeout (microtimeout_t to)
Set the default scheduling timeout to use when no data packets are waiting to be sent. microtimeout_t getDefaultExpireTimeout () const
void setExpireTimeout (microtimeout_t to)
Set the 'expired' timer for expiring packets pending in the send queue which have gone unsent and are already 'too late' to be sent now. microtimeout_t getExpireTimeout () const
uint32 getSendPacketCount () const
Get the total number of packets sent so far. uint32 getSendOctetCount () const
Get the total number of octets (payload only) sent so far. uint16 getSequenceNumber () const
Get the sequence number of the next outgoing packet. void setOutQueueCryptoContext (CryptoContext *cc)
Set output queue CryptoContext. void removeOutQueueCryptoContext (CryptoContext *cc)
Remove output queue CryptoContext. CryptoContext * getOutQueueCryptoContext (uint32 ssrc)
Get an output queue CryptoContext identified by SSRC.

Public Member Functions inherited from OutgoingDataQueueBase
size_t getDefaultMaxSendSegmentSize ()
void setMaxSendSegmentSize (size_t size)
Set maximum payload segment size before fragmenting sends. size_t getMaxSendSegmentSize ()

Public Member Functions inherited from RTPQueueBase
bool setPayloadFormat (const PayloadFormat &pf)
Set the payload format in use, for timing and payload type identification purposes. uint32 getLocalSSRC () const
uint32 getCurrentRTPClockRate () const
Get the clock rate in RTP clock units (for instance, 8000 units per second for PCMU, or 90000 units per second for MP2T). PayloadType getCurrentPayloadType () const
timeval getInitialTime () const

Protected Member Functions


OutgoingDataQueue ()
virtual ~OutgoingDataQueue ()
void dispatchImmediate (OutgoingRTPPkt *packet)
This is used to write the RTP data packet to one or more destinations. microtimeout_t getSchedulingTimeout ()
This computes the timeout period for scheduling transmission of the next packet at the 'head' of the send buffer. size_t dispatchDataPacket ()
This function is used by the service thread to process the next outgoing packet pending in the sending queue. void setNextSeqNum (uint32 seqNum)
For thoses cases in which the application requires a method to set the sequence number for the outgoing stream (such as for implementing the RTSP PLAY command). uint32 getCurrentSeqNum (void)
void setInitialTimestamp (uint32 ts)
uint32 getInitialTimestamp ()
void purgeOutgoingQueue ()
virtual void setControlPeer (const InetAddress &host, tpport_t port)

Protected Member Functions inherited from OutgoingDataQueueBase
OutgoingDataQueueBase ()
virtual ~OutgoingDataQueueBase ()

Protected Member Functions inherited from RTPQueueBase
RTPQueueBase (uint32 *ssrc=NULL)
void setLocalSSRC (uint32 ssrc)
uint32 getLocalSSRCNetwork () const
virtual ~RTPQueueBase ()
virtual size_t dispatchBYE (const std::string &)
A plugin point for posting of BYE messages. virtual void renewLocalSSRC ()

Protected Member Functions inherited from DestinationListHandler
void writeLockDestinationList () const
bool addDestinationToList (const InetAddress &ia, tpport_t data, tpport_t control)
Locks the object before modifying it. bool removeDestinationFromList (const InetAddress &ia, tpport_t dataPort, tpport_t controlPort)
Locks the object before modifying it.

DestinationListHandler ()
~DestinationListHandler ()
bool isSingleDestination () const
Get whether there is only a destination in the list. TransportAddress * getFirstDestination () const
void lockDestinationList () const
void unlockDestinationList () const

Protected Attributes


Mutex cryptoMutex
std::list< CryptoContext * > cryptoContexts

Protected Attributes inherited from DestinationListHandler
std::list< TransportAddress * > destList

Detailed Description

A generic outgoing RTP data queue supporting multiple destinations.

Author

Federico Montesino Pouzols fedemp@altern.org

Constructor & Destructor Documentation

OutgoingDataQueue::OutgoingDataQueue () [protected]

virtual OutgoingDataQueue::~OutgoingDataQueue () [inline], [protected], [virtual]

Member Function Documentation

void OutgoingDataQueue::addContributor (uint32 csrc)

Add csrc as the CSRC identifier of a new contributor. This method adds the CSRC identifier to a list of contributors that will be inserted in every packet enqueued from now on.

bool OutgoingDataQueue::addDestination (const InetHostAddress & ia, tpport_t dataPort = DefaultRTPDataPort, tpport_t controlPort = 0)

Examples
audiorx.cpp, audiotx.cpp, rtphello.cpp, and rtpsend.cpp.

bool OutgoingDataQueue::addDestination (const InetMcastAddress & ia, tpport_t dataPort = DefaultRTPDataPort, tpport_t controlPort = 0)

size_t OutgoingDataQueue::dispatchDataPacket () [protected]

This function is used by the service thread to process the next outgoing packet pending in the sending queue.

Returns

number of bytes sent. 0 if silent, <0 if error.

void OutgoingDataQueue::dispatchImmediate (OutgoingRTPPkt * packet) [protected]

This is used to write the RTP data packet to one or more destinations. It is used by both sendImmediate and by dispatchDataPacket.

Parameters

RTP packet to send.

bool OutgoingDataQueue::forgetDestination (const InetHostAddress & ia, tpport_t dataPort = DefaultRTPDataPort, tpport_t controlPort = 0)

bool OutgoingDataQueue::forgetDestination (const InetMcastAddress & ia, tpport_t dataPort = DefaultRTPDataPort, tpport_t controlPort = 0)

uint32 OutgoingDataQueue::getCurrentSeqNum (void) [inline], [protected]

microtimeout_t OutgoingDataQueue::getDefaultExpireTimeout () const [inline]

microtimeout_t OutgoingDataQueue::getDefaultSchedulingTimeout () const [inline]

microtimeout_t OutgoingDataQueue::getExpireTimeout () const [inline]

uint32 OutgoingDataQueue::getInitialTimestamp () [inline], [protected]

bool OutgoingDataQueue::getMark () const [inline]

Get whether the mark bit will be set in the next packet.

CryptoContext * OutgoingDataQueue::getOutQueueCryptoContext (uint32 ssrc)

Get an output queue CryptoContext identified by SSRC.

Parameters

ssrc Request CryptoContext for this incoming SSRC

Returns

Pointer to CryptoContext of the SSRC of NULL if no context available for this SSRC.

microtimeout_t OutgoingDataQueue::getSchedulingTimeout () [protected]

This computes the timeout period for scheduling transmission of the next packet at the 'head' of the send buffer. If no packets are waiting, a default timeout is used. This actually forms the 'isPending()' timeout of the rtp receiver in the service thread.

Returns

timeout until next packet is scheduled to send.

uint32 OutgoingDataQueue::getSendOctetCount () const [inline]

Get the total number of octets (payload only) sent so far.

Returns

total number of payload octets sent in RTP packets.

uint32 OutgoingDataQueue::getSendPacketCount () const [inline]

Get the total number of packets sent so far.

Returns

total number of packets sent

uint16 OutgoingDataQueue::getSequenceNumber () const [inline]

Get the sequence number of the next outgoing packet.

Returns

the 16 bit sequence number.

bool OutgoingDataQueue::isSending () const

Determine if outgoing packets are waiting to send.

Returns

true if there are packets waiting to be send.

void OutgoingDataQueue::purgeOutgoingQueue () [protected]

void OutgoingDataQueue::putData (uint32 stamp, const unsigned char * data = NULL, size_t len = 0)

This is used to create a data packet in the send queue. Sometimes a 'NULL' or empty packet will be used instead, and these are known as 'silent' packets. 'Silent' packets are used simply to 'push' the scheduler along more accurately by giving the appearance that a next packet is waiting to be sent and to provide a valid timestamp for that packet.

Parameters

stamp Timestamp for expected send time of packet.
data Value or NULL if special 'silent' packet.
len May be 0 to indicate a default by payload type.

Examples
audiotx.cpp, ccrtptest.cpp, rtpduphello.cpp, rtphello.cpp, and rtpsend.cpp.

bool OutgoingDataQueue::removeContributor (uint32 csrc)

Remove CSRC from the list of contributors.

void OutgoingDataQueue::removeOutQueueCryptoContext (CryptoContext * cc)

Remove output queue CryptoContext. The endQueue method (provided by RTPQueue) also deletes all registered CryptoContexts.

Parameters

cc Pointer to initialized CryptoContext to remove.

void OutgoingDataQueue::sendImmediate (uint32 stamp, const unsigned char * data = NULL, size_t len = 0)

This is used to create a data packet and send it immediately. Sometimes a 'NULL' or empty packet will be used instead, and these are known as 'silent' packets. 'Silent' packets are used simply to 'push' the scheduler along more accurately by giving the appearance that a next packet is waiting to be sent and to provide a valid timestamp for that packet.

Parameters

stamp Timestamp immediate send time of packet.
data Value or NULL if special 'silent' packet.
len May be 0 to indicate a default by payload type.

virtual void OutgoingDataQueue::setControlPeer (const InetAddress & host, tpport_t port) [inline], [protected], [virtual]

Reimplemented in RTPDuplex, TRTPSessionBase< RTPDataChannel, RTCPChannel, ServiceQueue >, and TRTPSessionBase< DualRTPUDPIPv4Channel, DualRTPUDPIPv4Channel, AVPQueue >.

void OutgoingDataQueue::setExpireTimeout (microtimeout_t to) [inline]

Set the 'expired' timer for expiring packets pending in the send queue which have gone unsent and are already 'too late' to be sent now.

Parameters

to timeout to expire unsent packets in milliseconds.

Examples
ccrtptest.cpp, rtpduphello.cpp, rtphello.cpp, rtplisten.cpp, and rtpsend.cpp.

void OutgoingDataQueue::setInitialTimestamp (uint32 ts) [inline], [protected]

void OutgoingDataQueue::setMark (bool mark) [inline]

Set marker bit for the packet in which the next data provided will be send. When transmitting audio, should be set for the first packet of a talk spurt. When transmitting video, should be set for the last packet for a video frame.

Parameters

mark Marker bit value for next packet.

void OutgoingDataQueue::setNextSeqNum (uint32 seqNum) [inline], [protected]

For thoses cases in which the application requires a method to set the sequence number for the outgoing stream (such as for implementing the RTSP PLAY command).

Parameters

seqNum next sequence number to be used for outgoing packets.

void OutgoingDataQueue::setOutQueueCryptoContext (CryptoContext * cc)

Set output queue CryptoContext. The endQueue method (provided by RTPQueue) deletes all registered CryptoContexts.

Parameters

cc Pointer to initialized CryptoContext.

void OutgoingDataQueue::setPadding (uint8 paddinglen) [inline]

Set padding. All outgoing packets will be transparently padded to a multiple of paddinglen.

Parameters

paddinglen pad packets to a length multiple of paddinglen.

size_t OutgoingDataQueue::setPartial (uint32 timestamp, unsigned char * data, size_t offset, size_t max)

Set partial data for an already queued packet. This is often used for multichannel data.

Parameters

timestamp Timestamp of packet.
data Buffer to copy from.
offset Offset to copy from.
max Maximum data size.

Returns

Number of packet data bytes set.

void OutgoingDataQueue::setSchedulingTimeout (microtimeout_t to) [inline]

Set the default scheduling timeout to use when no data packets are waiting to be sent.

Parameters

to timeout in milliseconds.

Examples
audiorx.cpp, audiotx.cpp, ccrtptest.cpp, rtpduphello.cpp, rtphello.cpp, and rtpsend.cpp.

Member Data Documentation

bool OutgoingDataQueue::complete

std::list<CryptoContext *> OutgoingDataQueue::cryptoContexts [protected]

Mutex OutgoingDataQueue::cryptoMutex [mutable], [protected]

bool OutgoingDataQueue::marked

uint32 OutgoingDataQueue::octetCount

timeval OutgoingDataQueue::overflowTime

uint32 OutgoingDataQueue::packetCount

uint8 OutgoingDataQueue::paddinglen

uint16 OutgoingDataQueue::sendCC

uint16 OutgoingDataQueue::sendSeq

uint32 OutgoingDataQueue::sendSources[16]

Author

Generated automatically by Doxygen for ccRTP from the source code.

ccRTP