Data Structures¶

struct globus_i_ftp_client_range_t
Byte range report.

Typedefs¶

typedef struct globus_i_ftp_client_operationattr_t * globus_ftp_client_operationattr_t
Operation Attributes.

Plugin Management¶

globus_result_t globus_ftp_client_operationattr_init (globus_ftp_client_operationattr_t *attr)
globus_result_t globus_ftp_client_operationattr_destroy (globus_ftp_client_operationattr_t *attr)

Storage Module¶

globus_result_t globus_ftp_client_operationattr_set_storage_module (globus_ftp_client_operationattr_t *attr, const char *module_name, const char *module_args)

Custom Data Channel Driver Stack¶

globus_result_t globus_ftp_client_operationattr_set_net_stack (globus_ftp_client_operationattr_t *attr, const char *driver_list)

Custom Server File Driver Stack¶

globus_result_t globus_ftp_client_operationattr_set_disk_stack (globus_ftp_client_operationattr_t *attr, const char *driver_list)

Parallelism¶

globus_result_t globus_ftp_client_operationattr_set_parallelism (globus_ftp_client_operationattr_t *attr, const globus_ftp_control_parallelism_t *parallelism)

allocate¶

globus_result_t globus_ftp_client_operationattr_set_allocate (globus_ftp_client_operationattr_t *attr, const globus_off_t allocated_size)

authz_assert¶

globus_result_t globus_ftp_client_operationattr_set_authz_assert (globus_ftp_client_operationattr_t *attr, const char *authz_assert, globus_bool_t cache_authz_assert)

Striped Data Movement¶

globus_result_t globus_ftp_client_operationattr_set_striped (globus_ftp_client_operationattr_t *attr, globus_bool_t striped)

Striped File Layout¶

globus_result_t globus_ftp_client_operationattr_set_layout (globus_ftp_client_operationattr_t *attr, const globus_ftp_control_layout_t *layout)

TCP Buffer¶

globus_result_t globus_ftp_client_operationattr_set_tcp_buffer (globus_ftp_client_operationattr_t *attr, const globus_ftp_control_tcpbuffer_t *tcp_buffer)

File Type¶

globus_result_t globus_ftp_client_operationattr_set_type (globus_ftp_client_operationattr_t *attr, globus_ftp_control_type_t type)

Transfer Mode¶

globus_result_t globus_ftp_client_operationattr_set_mode (globus_ftp_client_operationattr_t *attr, globus_ftp_control_mode_t mode)
globus_result_t globus_ftp_client_operationattr_set_list_uses_data_mode (const globus_ftp_client_operationattr_t *attr, globus_bool_t list_uses_data_mode)
globus_result_t globus_ftp_client_operationattr_set_delayed_pasv (const globus_ftp_client_operationattr_t *attr, globus_bool_t delayed_pasv)

Authorization¶

globus_result_t globus_ftp_client_operationattr_set_authorization (globus_ftp_client_operationattr_t *attr, gss_cred_id_t credential, const char *user, const char *password, const char *account, const char *subject)

Data Channel Authentication¶

globus_result_t globus_ftp_client_operationattr_set_dcau (globus_ftp_client_operationattr_t *attr, const globus_ftp_control_dcau_t *dcau)

Data Channel Protection¶

globus_result_t globus_ftp_client_operationattr_set_data_protection (globus_ftp_client_operationattr_t *attr, globus_ftp_control_protection_t protection)

Data Channel Security Context¶

globus_result_t globus_ftp_client_operationattr_set_data_security (globus_ftp_client_operationattr_t *attr, int type, void *credential)

Control Channel Protection¶

globus_result_t globus_ftp_client_operationattr_set_control_protection (globus_ftp_client_operationattr_t *attr, globus_ftp_control_protection_t protection)

Append¶

globus_result_t globus_ftp_client_operationattr_set_append (globus_ftp_client_operationattr_t *attr, globus_bool_t append)

IPv6¶

globus_result_t globus_ftp_client_operationattr_set_allow_ipv6 (globus_ftp_client_operationattr_t *attr, globus_bool_t allow_ipv6)

Read into a Single Buffer¶

globus_result_t globus_ftp_client_operationattr_set_read_all (globus_ftp_client_operationattr_t *attr, globus_bool_t read_all, globus_ftp_client_data_callback_t intermediate_callback, void *intermediate_callback_arg)
globus_result_t globus_ftp_client_operationattr_copy (globus_ftp_client_operationattr_t *dst, const globus_ftp_client_operationattr_t *src)

typedef struct globus_i_ftp_client_operationattr_t* globus_ftp_client_operationattr_t¶

Operation Attributes. FTP Client attributes are used to control the parameters needed to access an URL using the FTP protocol. Attributes are created and manipulated using the functions in the attributes section of the library.

See also

globus_result_t globus_ftp_client_operationattr_copy (globus_ftp_client_operationattr_t * dst, const globus_ftp_client_operationattr_t * src)¶

Create a duplicate of an attribute set.

The duplicated attribute set has a deep copy of all data in the attribute set, so the original may be destroyed, while the copy is still valid.

Parameters

globus_result_t globus_ftp_client_operationattr_destroy (globus_ftp_client_operationattr_t * attr)¶

Destroy an FTP client attribute set.

Parameters

globus_result_t globus_ftp_client_operationattr_init (globus_ftp_client_operationattr_t * attr)¶

Initialize an FTP client attribute set.

Parameters

globus_result_t globus_ftp_client_operationattr_set_allocate (globus_ftp_client_operationattr_t * attr, const globus_off_t allocated_size)¶

Set/Get the allocate attribute for an ftp client attribute set.

This attribute lets the user set a size to be passed to the server before a put operation.

This attribute is ignored for get operations.

Parameters

globus_result_t globus_ftp_client_operationattr_set_allow_ipv6 (globus_ftp_client_operationattr_t * attr, globus_bool_t allow_ipv6)¶

Set/Get the allow ipv6 attribute for an ftp client attribute set.

This attribute allows client library to make use of ipv6 when possible.

Use of this is currently very experimental.

Parameters

globus_result_t globus_ftp_client_operationattr_set_append (globus_ftp_client_operationattr_t * attr, globus_bool_t append)¶

Set/Get the append attribute for an ftp client attribute set.

This attribute allows the user to append to a file on an FTP server, instead of replacing the existing file when doing a globus_ftp_client_put() or globus_ftp_client_transfer().

This attribute is ignored on the retrieving side of a transfer, or a globus_ftp_client_get().

Parameters

globus_result_t globus_ftp_client_operationattr_set_authorization (globus_ftp_client_operationattr_t * attr, gss_cred_id_t credential, const char * user, const char * password, const char * account, const char * subject)¶

Set/Get the authorization attribute for an ftp client attribute set.

This attribute allows the user to pass authentication information to the ftp client library. This information is used to authenticate with the ftp server.

The Globus FTP client library supports authentication using either the GSSAPI, or standard plaintext username and passwords. The type of authentication is determined by the URL scheme which is used for the individual get, put, or 3rd party transfer calls.

Parameters

globus_result_t globus_ftp_client_operationattr_set_authz_assert (globus_ftp_client_operationattr_t * attr, const char * authz_assert, globus_bool_t cache_authz_assert)¶

Set/Get the authz_assert attribute for an ftp client attribute set.

This attribute lets the user set an AUTHORIZATION assertion to be passed to the server

Parameters

globus_result_t globus_ftp_client_operationattr_set_control_protection (globus_ftp_client_operationattr_t * attr, globus_ftp_control_protection_t protection)¶

Set/Get the control channel protection attribute for an ftp client attribute set.

The control channel protection attribute allows the user to decide whether to encrypt or integrity check the command session between the client and the FTP server. This attribute is only relevant if used with a gsiftp URL.

Parameters

Note

globus_result_t globus_ftp_client_operationattr_set_data_protection (globus_ftp_client_operationattr_t * attr, globus_ftp_control_protection_t protection)¶

Set/Get the data channel protection attribute for an ftp client attribute set.

Parameters

Note

globus_result_t globus_ftp_client_operationattr_set_data_security (globus_ftp_client_operationattr_t * attr, int type, void * credential)¶

Set/Get the data channel security context type and credential.

Parameters

globus_result_t globus_ftp_client_operationattr_set_dcau (globus_ftp_client_operationattr_t * attr, const globus_ftp_control_dcau_t * dcau)¶

Set/Get the data channel authentication attribute for an ftp client attribute set.

Data channel authentication is a GridFTP extension, and may not be supported by all servers. If a server supports it, then the default is to delegate a credential to the server, and authenticate all data channels with that delegated credential.

Parameters

globus_result_t globus_ftp_client_operationattr_set_delayed_pasv (const globus_ftp_client_operationattr_t * attr, globus_bool_t delayed_pasv)¶

Set/Get whether or not delayed passive should be used

This attribute allows the user to enable delayed passive so the server can provide the passive address after it knows the filename to be transferred.

Parameters

Note

globus_result_t globus_ftp_client_operationattr_set_disk_stack (globus_ftp_client_operationattr_t * attr, const char * driver_list)¶

Set/Get the gridftp xio driver stack used for the file storage.

This attribute allows the user to control which xio drivers will be used for file DSI only. This is an experimental feature of the gridftp server. Only works for third party transfers.

Parameters

Note

globus_result_t globus_ftp_client_operationattr_set_layout (globus_ftp_client_operationattr_t * attr, const globus_ftp_control_layout_t * layout)¶

Set/Get the layout attribute for an ftp client attribute set.

This attribute allows the user to control the layout of a file being transferred to a striped Grid-FTP server. The striping layout defines what regions of a file will be stored on each stripe of a multiple-striped ftp server.

The layout attribute is used only when the data is being stored on the server (on a put or 3rd party transfer). This attribute is ignored for stream mode data transfers.

Parameters

See also

Note

globus_result_t globus_ftp_client_operationattr_set_list_uses_data_mode (const globus_ftp_client_operationattr_t * attr, globus_bool_t list_uses_data_mode)¶

Set/Get whether or not list data will use the current data mode

This attribute allows the user to allow list data to be transferred using the current data channel mode.

Parameters

Note

globus_result_t globus_ftp_client_operationattr_set_mode (globus_ftp_client_operationattr_t * attr, globus_ftp_control_mode_t mode)¶

Set/Get the file transfer mode attribute for an ftp client attribute set.

This attribute allows the user to choose the data channel protocol used to transfer a file. There are two modes supported by this library: stream mode and extended block mode.

Stream mode is a file transfer mode where all data is sent over a single TCP socket, without any data framing. In stream mode, data will arrive in sequential order. This mode is supported by nearly all FTP servers.

Extended block mode is a file transfer mode where data can be sent over multiple parallel connections and to multiple data storage nodes to provide a high-performance data transfer. In extended block mode, data may arrive out-of-order. ASCII type files are not supported in extended block mode.

Parameters

See also

Note

globus_result_t globus_ftp_client_operationattr_set_net_stack (globus_ftp_client_operationattr_t * attr, const char * driver_list)¶

Set/Get the gridftp xio driver stack used for the data channel.

This attribute allows the user to control which xio drivers will be used for data transport. The driver MUST be installed and allowed by the server or the transfer/get/put will result in an error.

Parameters

Note

globus_result_t globus_ftp_client_operationattr_set_parallelism (globus_ftp_client_operationattr_t * attr, const globus_ftp_control_parallelism_t * parallelism)¶

Set/Get the parallelism attribute for an ftp client attribute set.

This attribute allows the user to control the level of parallelism to be used on an extended block mode file transfer. Currently, only a 'fixed' parallelism level is supported. This is interpreted by the FTP server as the number of parallel data connections to be allowed for each stripe of data. Currently, only the 'fixed' parallelism type is

This attribute is ignored in stream mode.

Parameters

See also

Note

globus_result_t globus_ftp_client_operationattr_set_read_all (globus_ftp_client_operationattr_t * attr, globus_bool_t read_all, globus_ftp_client_data_callback_t intermediate_callback, void * intermediate_callback_arg)¶

Set/Get the read_all attribute for an ftp client attribute set.

This attribute allows the user to pass in a single buffer to receive all of the data for the current transfer. This buffer must be large enough to hold all of the data for the transfer. Only one buffer may be registered with globus_ftp_client_register_read() when this attribute is used for a get.

In extended block mode, this attribute will cause data to be stored directly into the buffer from multiple streams without any extra data copies.

If the user sets the intermediate callback to a non-null value, this function will be called whenever an intermediate sub-section of the data is received into the buffer.

This attribute is ignored for globus_ftp_client_put() or globus_ftp_client_third_party_transfer() operations.

Parameters

globus_result_t globus_ftp_client_operationattr_set_storage_module (globus_ftp_client_operationattr_t * attr, const char * module_name, const char * module_args)¶

Set/Get the gridftp storage module (DSI).

This attribute allows the user to control what backend module they use with the gridftp server. The module MUST be implemented by the server or the transfer/get/put will result in an error.

This attribute is ignored in stream mode.

Parameters

Note

globus_result_t globus_ftp_client_operationattr_set_striped (globus_ftp_client_operationattr_t * attr, globus_bool_t striped)¶

Set/Get the striped attribute for an ftp client attribute set.

This attribute allows the user to force the client library to used the FTP commands to do a striped data transfer, even when the user has not requested a specific file layout via the layout attribute. This is useful when transferring files between servers which use the server side processing commands ERET or ESTO to transform data and send it to particular stripes on the destination server.

The layout attribute is used only when the data is being stored the server (on a put or 3rd party transfer). This attribute is ignored for stream mode data transfers.

Parameters

See also

Note

globus_result_t globus_ftp_client_operationattr_set_tcp_buffer (globus_ftp_client_operationattr_t * attr, const globus_ftp_control_tcpbuffer_t * tcp_buffer)¶

Set/Get the TCP buffer attribute for an ftp client attribute set.

This attribute allows the user to control the TCP buffer size used for all data channels used in a file transfer. The size of the TCP buffer can make a significant impact on the performance of a file transfer. The user may set the buffer to either a system-dependent default value, or to a fixed value.

The actual implementation of this attribute is designed to be as widely interoperable as possible. In addition to supporting the SBUF command described in the GridFTP protocol extensions document, it also supports other commands and site commands which are used by other servers to set TCP buffer sizes. These are

• SITE RETRBUFSIZE
• SITE RBUFSZ
• SITE RBUFSIZ
• SITE STORBUFIZE
• SITE SBUFSZ
• SITE SBUFSIZ
• SITE BUFSIZE

This attribute is affects any type of data transfer done with the ftp client library.

Parameters

globus_result_t globus_ftp_client_operationattr_set_type (globus_ftp_client_operationattr_t * attr, globus_ftp_control_type_t type)¶

Set/Get the file representation type attribute for an ftp client attribute set.

This attribute allows the user to choose the file type used for an FTP file transfer. The file may be transferred as either ASCII or a binary image.

When transferring an ASCII file, the data will be transformed in the following way

• the high-order bit will be set to zero
• end-of line characters will be converted to a CRLF pair for the data transfer, and then converted to native format before being returned to the user's data callbacks.

The default type for the ftp client library is binary.

Parameters