PACKAGE METHODS¶

new Net::Radius::Packet $dictionary, $data

Returns a new Net::Radius::Packet object. $dictionary is an optional reference to a Net::Radius::Dictionary object. If not supplied, you must call set_dict.

If $data is supplied, unpack will be called for you to initialize the object.

Proxy-State, RFC specification¶

From RFC-2865:

  2. Operation
  
  If any Proxy-State attributes were present in the Access-Request,
  they MUST be copied unmodified and in order into the response packet.
  Other Attributes can be placed before, after, or even between the
  Proxy-State attributes.
  
  2.3 Proxy
  
  The forwarding server MUST treat any Proxy-State attributes already
  in the packet as opaque data.  Its operation MUST NOT depend on the
  content of Proxy-State attributes added by previous servers.
  
  If there are any Proxy-State attributes in the request received from
  the client, the forwarding server MUST include those Proxy-State
  attributes in its reply to the client.  The forwarding server MAY
  include the Proxy-State attributes in the access-request when it
  forwards the request, or MAY omit them in the forwarded request.  If
  the forwarding server omits the Proxy-State attributes in the
  forwarded access-request, it MUST attach them to the response before
  sending it to the client.

Proxy-State, Implementation¶

"->pack()" and "->dump()" now work properly with multiple atributes, in particular the Proxy-State attribute - This means that the packet will be encoded with the multiple attributes present. This change makes Net::Radius::PacketOrdered likely redundant.

"->attr()" method always return the last attribute inserted.

"->set_attr()" and "->set_vsattr()" methods push either the attribute or the vendor-specific attribute, onto the Attributes stack, or overwrites it in specific circumnstances, as described in method documentation. The "->unset_attr()" and "->unset_vsattr()" perform the opposite function.

OBJECT METHODS¶

There are actually two families of object methods. The ones described below deal with standard RADIUS attributes. An additional set of methods handle the Vendor-Specific attributes as defined in the RADIUS protocol. Those methods behave in much the same way as the ones below with the exception that the prefix vs must be applied before the attr in most of the names. The vendor code must also be included as the first parameter of the call.

The vsattr and set_vsattr methods, used to query and set Vendor-Specific attributes return an array reference with the values of each instance of the particular attribute in the packet. This difference is required to support multiple VSAs with different parameters in the same packet.

->set_dict($dictionary)

Net::Radius::Packet needs access to a Net::Radius::Dictionary object to do packing and unpacking. set_dict must be called with an appropriate dictionary reference (see Net::Radius::Dictionary) before you can use ->pack or ->unpack.

->unpack($data)

Given a raw RADIUS packet $data, unpacks its contents so that they can be retrieved with the other methods (code, attr, etc.).

->pack

Returns a raw RADIUS packet suitable for sending to a RADIUS client or server.

->code

Returns the Code field as a string. As of this writing, the following codes are defined:

    Access-Request
    Access-Accept
    Access-Reject
    Accounting-Request
    Accounting-Response
    Accounting-Status
    Interim-Accounting
    Password-Request
    Password-Ack
    Password-Reject
    Accounting-Message
    Access-Challenge
    Status-Server
    Status-Client
    Resource-Free-Request
    Resource-Free-Response
    Resource-Query-Request
    Resource-Query-Response
    Alternate-Resource-Reclaim-Request
    NAS-Reboot-Request
    NAS-Reboot-Response
    Next-Passcode
    New-Pin
    Terminate-Session
    Password-Expired
    Event-Request
    Event-Response
    Disconnect-Request
    Disconnect-ACK
    Disconnect-NAK
    CoA-Request
    CoA-ACK
    CoA-NAK
    IP-Address-Allocate
    IP-Address-Release
    

->set_code($code)

Sets the Code field to the string supplied.

->identifier()

Returns the one-byte Identifier used to match requests with responses, as a character value.

->set_identifier($id)

Sets the Identifier byte to the character supplied.

->authenticator()

Returns the 16-byte Authenticator field as a character string.

->set_authenticator($authenticator)

Sets the Authenticator field to the character string supplied.

->attr($name)

Retrieves the value of the named Attribute. Attributes will be converted automatically based on their dictionary type:

        STRING     Returned as a string.
        INTEGER    Returned as a Perl integer.
        IPADDR     Returned as a string (a.b.c.d)
        TIME       Returned as an integer
    

The following types are simply mapped to other types until correct encoding is implemented:

->set_attr($name, $val, $rewrite_flag)

Sets the named Attributes to the given value. Values should be supplied as they would be returned from the attr method. If rewrite_flag is set, and a single attribute with such name already exists on the Attributes stack, its value will be overwriten with the supplied one. In all other cases (if there are more than one attributes with such name already on the stack, there are no attributes with such name, rewrite_flag is omitted) name/pair array will be pushed onto the stack.

->set_vsattr($vendor, $name, $val, $rewrite_flag)

Analogous to "->set_attr()", but operates on vendor-specific attributes for vendor $vendor.

->unset_attr($name)

Sets the named Attribute to the given value. Values should be supplied as they would be returned from the attr method.

->unset_vsattr($vendor, $name)

Analogous to "->unset_attr()", but operates on vendor-specific attributes for vendor $vendor.

->attr_slot($integer)

Deprecated synonym for "->attr_slot_val()".

->attr_slots()

Return the number of attribute slots in the packet.

->attr_slot_name($integer)

Retrieves the attribute name of the given slot number from the Attributes stack. Returns undef when the slot is vacant.

->attr_slot_val($integer)

Retrieves the attribute value of the given slot number from the Attributes stack. Returns undef when the slot is vacant.

->unset_attr_slot($integer)

Removes given stack position from the Attributes stack.

->password($secret, [$attr])

The RADIUS User-Password attribute is encoded with a shared secret. Use this method to return the decoded version. By default, the password will be looked for in the User-Password attribute. You can specify an alternate RADIUS attribute, by using the second argument.

->set_password($passwd, $secret, [$attribute])

The RADIUS User-Password attribute is encoded with a shared secret. Use this method to prepare the encoded version. The encoded password will be stored in the attribute $attribute, which defaults to 'User-Password'.

Some servers have been reported on insisting on this attribute to be 'Password' instead. You may have to tweak this call or the dictionary accordingly.

->dump()

Prints the content of the packet to STDOUT.

->show_unknown_entries($bool)

Controls the generation of a "warn()" whenever an unknown tuple is seen.

EXPORTED SUBROUTINES¶

auth_resp($packed_packet, $secret [, accounting])

Given a (packed) RADIUS packet and a shared secret, returns a new packet with the Authenticator field changed in accordace with RADIUS protocol requirements.

If the third optional parameter is true, the Authenticator is encoded for an accounting packet, using 16 0x0 octets as the placeholder for the authenticator.

auth_acct_verify($packet, $secret)

Verifies the authenticator in an Accounting-Request packet as explained in RFC-2866. Returns 1 if the authenticator matches the packet and the secret, undef otherwise.

$packet is the packet data, as received. $secret is the corresponding shared secret.

auth_req_verify($packet, $secret, $prev_auth)

Verifies the authenticator in Access-Accept, Access-Reject, and Access-Challenge packets as explained in RFC-2865. Returns 1 if the authenticator matches the packet and the secret, undef otherwise.

$packet is the packet data, as received. $secret is the corresponding shared secret. $prev_auth is the authenticator taken from the corresponding Access-Accept packet.

It's the application's job to keep track of the authenticators in each request.