Scroll to navigation

ULP(1) Libpulp Tools ULP(1)

NAME

ulp - Userspace Livepatching Tool

SYNOPSIS

ulp command [SWITCHES]... [ARGUMENTS] file

INTRODUCTION

ulp consists of a set of tools used in the userspace livepatching process. Those include querying patch status, libpulp messages, applying and removing patches, and checking for livepatch capabilities within a process.

list running programs that have livepatching capabilities loaded, as well the libraries that are livepatchable and the list of loaded patches.
check if a certain livepatch (.so) is applied to a running process.
print the content of a livepatch (.so) in human-readable form.
compile the livepatch descriptor (.dsc file) into a livepatch (.ulp file). The later can be used to apply a livepatch to a running process using trigger.
apply or remove a list of livepatches to a list of running processes.
apply any post-processing needed to livepatch containers (.so files).
querry the libpulp internal message queue in a running process. This can be used to diagnose livepaching errors that occured internally in the target process.
sections.

PATCHES

NAME

ulp patches - Show active live patches and libraries

SYNOPSIS

ulp patches -pwildcard

DESCRIPTION

ulp patches show which libraries are livepatchable and which livepatches are loaded in process that matches either wildcard as name or with pid = wildcard.

OPTIONS

wildcard Show processes which name matches the wildcard, or with pid = wildcard.

EXIT STATUS

exits 0 on success, anything else on error.

CHECK

NAME

ulp check - Apply a live patch

SYNOPSIS

ulp check [OPTION]... -ppid file

DESCRIPTION

ulp check attaches to the target process specified by pid and checks whether the live patch described by the metadata file that it takes as argument has already been applied or not.

Only relevant processes can be inspected with ulpcheck. More specifically, the following conditions must be met:

Libpulp uses ptrace to attach to target processes, thus only the owner of a process (or root) can apply a live patch to it. Moreover, on systems that have Linux Security Modules (LSM) enabled, some extra convincing might be required (see Ptrace access mode checking in ptrace(2)). When ulp check is unable to attach to the target process, it exits in error.
Applying a live patch requires functions from libpulp.so, which must have been loaded into the address space of the target process. Typically, this is accomplished with LD_PRELOAD (see libpulp(7)).

FATAL ERRORS

If a problem happens during the execution of functions from libpulp.so, the target process might end up in an inconsistent state. When that happens ulp check exits with error code -1, and the user is advised to kill the process.

OPTIONS

Do not produce any output.
Produce verbose output.
-?, --help
Display a lengthy usage message.
Display a brief usage message.
Print program version and exit.

BUGS

also returns -1 on non-fatal errors.

EXIT STATUS

exits 0 on success, 1 on error, and -1 on fatal errors. A fatal error is an indication that the target process should be killed, because it was probably left in an inconsistent state.

DUMP

NAME

ulp dump - Prints metadata information in human-readable format

SYNOPSIS

file

DESCRIPTION

parses the metadata file that it takes as argument, which is in binary format, then prints its content to the standard output in human-readable format.

EXIT STATUS

exits 0 on success and 1 on error.

PACKER

NAME

ulp packer - Create live patch metadata

SYNOPSIS

ulp packer [OPTION]... file_wildcard

DESCRIPTION

ulp packer creates a live patch metadata file based on the live patch description file that it takes as argument. After parsing the description file, ulp packer validates that the target library and live patch objects referred to exist, then produces the metadata file required by live patching tools, such as ulp trigger(1) and ulp check(1).

The syntax of the description file is described in libpulp(7).

By default, the output is written to stdout, but it can be optionally redirected to a specified file. See OPTIONS below.

OPTIONS

Instead of printing the results to the standard output, write them to FILENAME.
Patch any process which name matches the WILDCARD. A single PID is also supported by passing WILDCARD=PID of the target process.

-l, --livepatch=FILENAME Instead of getting the path to the live patch object from the description file, use FILENAME.

Instead of getting the path to the target library from the description file, use FILENAME.
Do not produce any output.
Produce verbose output.
-?, --help
Display a lengthy usage message.
Display a brief usage message.
Print program version and exit.
Append PREFIX to the path to the livepatch .so file when it is send to the target process. This is useful if ulp is running inside a chroot.

EXIT STATUS

ulp packer exits 0 on success and 1 on error.

TRIGGER

NAME

ulp trigger - Apply a live patch

SYNOPSIS

ulp trigger [OPTION]... -p process_wildcard file_wildcard

DESCRIPTION

ulp trigger attaches to the target process specified by a set of process in process_wildcard or a single process with pid equals to process_wildcard and applies a set of livepatches described by the metadata file_wildcard that it takes as argument. After parsing the metadata file, several checks are performed to verify that the target process can receive the specified live patch:

A live patch replaces functions belonging to a shared library, thus, ulp trigger searches the memory space of the target process for its presence. When the library is not present, ulp trigger exits in error.
The metadata file contains a list of replacement functions, which must be present in the live patch object (DSO). If all functions are present, the live patching operation can proceed, otherwise ulp trigger exits in error.
Libpulp uses ptrace to attach to target processes, thus only the owner of a process (or root) can apply a live patch to it. Moreover, on systems that have Linux Security Modules (LSM) enabled, some extra convincing might be required (see Ptrace access mode checking in ptrace(2)). When ulp trigger is unable to attach to the target process, it exits in error.
Applying a live patch requires functions from libpulp.so, which must have been loaded into the address space of the target process. Typically, this is accomplished with LD_PRELOAD (see libpulp(7)).
After attaching to the target process with ptrace, Libpulp calls functions from libpulp.so. The execution of these functions happens from the context of a signal handler, thus AS-Unsafe functions are not allowed (see attributes(7)). However, Libpulp requires the use of malloc(3), dlopen(3) and dlsym(3), which are all AS-Unsafe. In order to avoid deadlocks, libpulp.so checks that these functions are not in execution anywhere in the target process, before starting the live patching operation.

FATAL ERRORS

If a problem happens after Libpulp started replacing functions from the target process, the process might end up in an inconsistent state. When that happens ulp trigger exits with error code -1, and the user is advised to kill the process.

OPTIONS

To guarantee Forward Progress, Libpulp first checks whether trying to apply a live patch would cause a deadlock in the target process, or if it would be safe to do so. By default, ulp trigger performs this check a single time and exits in error if the check fails. However, the state of the relevant locks usually changes very quickly, thus, there is a high chance that trying again after a brief moment would allow the live patching operation to succeed without risk of deadlock. This option tells ulp trigger to try again N times.
Before applying the live patch to the target process, unwind the stacks of all threads and make sure that none of them have library calls in execution. If any thread is within the target library, ulp trigger aborts the live patching operation; on the other hand, if no threads are within the target library, the live patch can be applied with additional consistency guarantees.
Before applying the live patch to the target process, revert all livepatches applied to the library LIB. If LIB=target, then all patches to the target library of the livepatch will be removed.
Disable output summarization. This avoids suppression of output 'irrelevant output' with regard to skipped livepatches.
Wait N seconds for a reply from libpulp. Default is 100s. In cases where the system is busy running multiple tasks it may be worth increasing this number, once ulp will bail out to not hang a system update.
Look for livepatches recursively when a wildcard is passed.
Do not produce any output.
Produce verbose output.
-?, --help
Display a lengthy usage message.
Display a brief usage message.
Print program version and exit.

EXIT STATUS

ulp trigger exits 0 on success, 1 on error, and -1 on fatal errors. A fatal error is an indication that the target process should be killed, because it was probably left in an inconsistent state.

POST

NAME

ulp post - Post-process live patchable libraries

SYNOPSIS

ulp post file

DESCRIPTION

ulp post opens the library file passed as argument and replaces one-byte nops with multi-byte nop instructions at patchable function entries (see gcc(1)).

EXIT STATUS

ulp post exits 0 on success, and 1 on error.

REVERSE

NAME

ulp reverse - Create live patch metadata

SYNOPSIS

file

DESCRIPTION

creates a live patch metadata used to revert the effects of the metadata file that it takes as argument. Live patch reversal does not require a live patch object file, because it does not add new replacement functions; rather, it causes the reverse-patched process to fallback to the functions that had been previously replaced. These functions are already present in the memory space of the target process.

EXIT STATUS

exits 0 on success and a positive integer on error.

MESSAGES

NAME

ulp messages - Querry internal messages from libpulp

SYNOPSIS

-p pid

DESCRIPTION

print all internal messages from libpulp message queue in process running with pid = pid Those messages are useful to debug any problem that may happens when a livepatch is applied.

EXIT STATUS

exits 0 on success, anything else on error.

EXTRACT

NAME

ulp extract - Extract the relevant content from a livepatchable library

SYNOPSIS

livepatchable_library -o output_file

DESCRIPTION

livepatchable_library such as the library name, buildid, and symbols in the library; and write those informations into a JSON file specified by output_file.

EXIT STATUS

SET_PATCHABLE

NAME

ulp set_patchable - Enable/disable livepatching on target process

SYNOPSIS

enable/disable

DESCRIPTION

-p WILDCARD. If WILDCARD is a number, then it is assumed to be the PID of the process. The program will output which processes were modified.

EXIT STATUS