Moose-like¶

The following types are similar to those described in Moose::Util::TypeConstraints.

• Any

  Absolutely any value passes this type constraint (even undef).

• Item

  Essentially the same as Any. All other type constraints in this library inherit directly or indirectly from Item.

• Bool

  Values that are reasonable booleans. Accepts 1, 0, the empty string and undef.

  Other customers also bought: BoolLike from Types::TypeTiny.

• Maybe[`a]

  Given another type constraint, also accepts undef. For example, Maybe[Int] accepts all integers plus undef.

• Undef

  Only undef passes this type constraint.

• Defined

  Only undef fails this type constraint.

• Value

  Any defined, non-reference value.

• Str

  Any string.

  (The only difference between Value and Str is that the former accepts typeglobs and vstrings.)

  Other customers also bought: StringLike from Types::TypeTiny.

• Num

  See LaxNum and StrictNum below.

• Int

  An integer; that is a string of digits 0 to 9, optionally prefixed with a hyphen-minus character.

  Expect inconsistent results for dualvars, and numbers too high (or negative numbers too low) for Perl to safely represent as an integer.

• ClassName

  The name of a loaded package. The package must have @ISA or $VERSION defined, or must define at least one sub to be considered a loaded package.

• RoleName

  Like ClassName, but the package must not define a method called "new". This is subtly different from Moose's type constraint of the same name; let me know if this causes you any problems. (I can't promise I'll change anything though.)

• Ref[`a]

  Any defined reference value, including blessed objects.

  Unlike Moose, Ref is a parameterized type, allowing Scalar::Util::reftype checks, a la

     Ref["HASH"]  # hashrefs, including blessed hashrefs
      

• ScalarRef[`a]

  A value where "ref($value) eq "SCALAR" or ref($value) eq "REF"".

  If parameterized, the referred value must pass the additional constraint. For example, ScalarRef[Int] must be a reference to a scalar which holds an integer value.

• ArrayRef[`a]

  A value where "ref($value) eq "ARRAY"".

  If parameterized, the elements of the array must pass the additional constraint. For example, ArrayRef[Num] must be a reference to an array of numbers.

  As an extension to Moose's ArrayRef type, a minimum and maximum array length can be given:

     ArrayRef[CodeRef, 1]        # ArrayRef of at least one CodeRef
     ArrayRef[FileHandle, 0, 2]  # ArrayRef of up to two FileHandles
     ArrayRef[Any, 0, 100]       # ArrayRef of up to 100 elements
      

  Other customers also bought: ArrayLike from Types::TypeTiny.

• HashRef[`a]

  A value where "ref($value) eq "HASH"".

  If parameterized, the values of the hash must pass the additional constraint. For example, HashRef[Num] must be a reference to an hash where the values are numbers. The hash keys are not constrained, but Perl limits them to strings; see Map below if you need to further constrain the hash values.

  Other customers also bought: HashLike from Types::TypeTiny.

• CodeRef

  A value where "ref($value) eq "CODE"".

  Other customers also bought: CodeLike from Types::TypeTiny.

• RegexpRef

  A reference where "re::is_regexp($value)" is true, or a blessed reference where "$value->isa("Regexp")" is true.

• GlobRef

  A value where "ref($value) eq "GLOB"".

• FileHandle

  A file handle.

• Object

  A blessed object.

  (This also accepts regexp refs.)

Structured¶

Okay, so I stole some ideas from MooseX::Types::Structured.

• Map[`k, `v]

  Similar to HashRef but parameterized with type constraints for both the key and value. The constraint for keys would typically be a subtype of Str.

• Tuple[...]

  Subtype of ArrayRef, accepting a list of type constraints for each slot in the array.

  Tuple[Int, HashRef] would match "[1, {}]" but not "[{}, 1]".

• Dict[...]

  Subtype of HashRef, accepting a list of type constraints for each slot in the hash.

  For example Dict[name => Str, id => Int] allows "{ name => "Bob", id => 42 }".

• Optional[`a]

  Used in conjunction with Dict and Tuple to specify slots that are optional and may be omitted (but not necessarily set to an explicit undef).

  Dict[name => Str, id => Optional[Int]] allows "{ name => "Bob" }" but not "{ name => "Bob", id => "BOB" }".

  Note that any use of Optional[`a] outside the context of parameterized Dict and Tuple type constraints makes little sense, and its behaviour is undefined. (An exception: it is used by Type::Params for a similar purpose to how it's used in Tuple.)

This module also exports a Slurpy parameterized type, which can be used as follows.

It can cause additional trailing values in a Tuple to be slurped into a structure and validated. For example, slurping into an arrayref:

   my $type = Tuple[ Str, Slurpy[ ArrayRef[Int] ] ];
   
   $type->( ["Hello"] );                # ok
   $type->( ["Hello", 1, 2, 3] );       # ok
   $type->( ["Hello", [1, 2, 3]] );     # not ok

Or into a hashref:

   my $type2 = Tuple[ Str, Slurpy[ Map[Int, RegexpRef] ] ];
   
   $type2->( ["Hello"] );                               # ok
   $type2->( ["Hello", 1, qr/one/i, 2, qr/two/] );      # ok

It can cause additional values in a Dict to be slurped into a hashref and validated:

   my $type3 = Dict[ values => ArrayRef, Slurpy[ HashRef[Str] ] ];
   
   $type3->( { values => [] } );                        # ok
   $type3->( { values => [], name => "Foo" } );         # ok
   $type3->( { values => [], name => [] } );            # not ok

In either Tuple or Dict, Slurpy[Any] can be used to indicate that additional values are acceptable, but should not be constrained in any way.

Slurpy[Any] is an optimized code path. Although the following are essentially equivalent checks, the former should run a lot faster:

   Tuple[ Int, Slurpy[Any] ]
   Tuple[ Int, Slurpy[ArrayRef] ]

A function "slurpy($type)" is also exported which was historically how slurpy types were created.

Outside of Dict and Tuple, Slurpy[Foo] should just act the same as Foo. But don't do that.

Objects¶

Okay, so I stole some ideas from MooX::Types::MooseLike::Base.

• InstanceOf[`a]

  Shortcut for a union of Type::Tiny::Class constraints.

  InstanceOf["Foo", "Bar"] allows objects blessed into the "Foo" or "Bar" classes, or subclasses of those.

  Given no parameters, just equivalent to Object.

• ConsumerOf[`a]

  Shortcut for an intersection of Type::Tiny::Role constraints.

  ConsumerOf["Foo", "Bar"] allows objects where "$o->DOES("Foo")" and "$o->DOES("Bar")" both return true.

  Given no parameters, just equivalent to Object.

• HasMethods[`a]

  Shortcut for a Type::Tiny::Duck constraint.

  HasMethods["foo", "bar"] allows objects where "$o->can("foo")" and "$o->can("bar")" both return true.

  Given no parameters, just equivalent to Object.

More¶

There are a few other types exported by this module:

• Overload[`a]

  With no parameters, checks that the value is an overloaded object. Can be given one or more string parameters, which are specific operations to check are overloaded. For example, the following checks for objects which overload addition and subtraction.

     Overload["+", "-"]
      

• Tied[`a]

  A reference to a tied scalar, array or hash.

  Can be parameterized with a type constraint which will be applied to the object returned by the "tied()" function. As a convenience, can also be parameterized with a string, which will be inflated to a Type::Tiny::Class.

     use Types::Standard qw(Tied);
     use Type::Utils qw(class_type);
     
     my $My_Package = class_type { class => "My::Package" };
     
     tie my %h, "My::Package";
     \%h ~~ Tied;                   # true
     \%h ~~ Tied[ $My_Package ];    # true
     \%h ~~ Tied["My::Package"];    # true
     
     tie my $s, "Other::Package";
     \$s ~~ Tied;                   # true
     $s  ~~ Tied;                   # false !!
      

  If you need to check that something is specifically a reference to a tied hash, use an intersection:

     use Types::Standard qw( Tied HashRef );
     
     my $TiedHash = (Tied) & (HashRef);
     
     tie my %h, "My::Package";
     tie my $s, "Other::Package";
     
     \%h ~~ $TiedHash;     # true
     \$s ~~ $TiedHash;     # false
      

• StrMatch[`a]

  A string that matches a regular expression:

     declare "Distance",
        as StrMatch[ qr{^([0-9]+)\s*(mm|cm|m|km)$} ];
      

  You can optionally provide a type constraint for the array of subexpressions:

     declare "Distance",
        as StrMatch[
           qr{^([0-9]+)\s*(.+)$},
           Tuple[
              Int,
              enum(DistanceUnit => [qw/ mm cm m km /]),
           ],
        ];
      

  Here's an example using Regexp::Common:

     package Local::Host {
        use Moose;
        use Regexp::Common;
        has ip_address => (
           is         => 'ro',
           required   => 1,
           isa        => StrMatch[qr/^$RE{net}{IPv4}$/],
           default    => '127.0.0.1',
        );
     }
      

  On certain versions of Perl, type constraints of the forms StrMatch[qr/../ and StrMatch[qr/\A..\z/ with any number of intervening dots can be optimized to simple length checks.

• Enum[`a]

  As per MooX::Types::MooseLike::Base:

     has size => (
        is     => "ro",
        isa    => Enum[qw( S M L XL XXL )],
     );
      

  You can enable coercion by passing "\1" before the list of values.

     has size => (
        is     => "ro",
        isa    => Enum[ \1, qw( S M L XL XXL ) ],
        coerce => 1,
     );
      

  This will use the "closest_match" method in Type::Tiny::Enum to coerce closely matching strings.

• OptList

  An arrayref of arrayrefs in the style of Data::OptList output.

• LaxNum, StrictNum

  In Moose 2.09, the Num type constraint implementation was changed from being a wrapper around Scalar::Util's "looks_like_number" function to a stricter regexp (which disallows things like "-Inf" and "Nan").

  Types::Standard provides both implementations. LaxNum is measurably faster.

  The Num type constraint is currently an alias for LaxNum unless you set the "PERL_TYPES_STANDARD_STRICTNUM" environment variable to true before loading Types::Standard, in which case it becomes an alias for StrictNum. The constant "Types::Standard::STRICTNUM" can be used to check if Num is being strict.

  Most people should probably use Num or StrictNum. Don't explicitly use LaxNum unless you specifically need an attribute which will accept things like "Inf".

• CycleTuple[`a]

  Similar to Tuple, but cyclical.

     CycleTuple[Int, HashRef]
      

  will allow "[1,{}]" and "[1,{},2,{}]" but disallow "[1,{},2]" and "[1,{},2,[]]".

  I think you understand CycleTuple already.

  Currently Optional and Slurpy parameters are forbidden. There are fairly limited use cases for them, and it's not exactly clear what they should mean.

  The following is an efficient way of checking for an even-sized arrayref:

     CycleTuple[Any, Any]
      

  The following is an arrayref which would be suitable for coercing to a hashref:

     CycleTuple[Str, Any]
      

  All the examples so far have used two parameters, but the following is also a possible CycleTuple:

     CycleTuple[Str, Int, HashRef]
      

  This will be an arrayref where the 0th, 3rd, 6th, etc values are strings, the 1st, 4th, 7th, etc values are integers, and the 2nd, 5th, 8th, etc values are hashrefs.

Coercions¶

Most of the types in this type library have no coercions. The exception is Bool as of Types::Standard 1.003_003, which coerces from Any via "!!$_".

Some standalone coercions may be exported. These can be combined with type constraints using the "plus_coercions" method.

• MkOpt

  A coercion from ArrayRef, HashRef or Undef to OptList. Example usage in a Moose attribute:

     use Types::Standard qw( OptList MkOpt );
     
     has options => (
        is     => "ro",
        isa    => OptList->plus_coercions( MkOpt ),
        coerce => 1,
     );
      

• Split[`a]

  Split a string on a regexp.

     use Types::Standard qw( ArrayRef Str Split );
     
     has name => (
        is     => "ro",
        isa    => ArrayRef->of(Str)->plus_coercions(Split[qr/\s/]),
        coerce => 1,
     );
      

• Join[`a]

  Join an array of strings with a delimiter.

     use Types::Standard qw( Str Join );
     
     my $FileLines = Str->plus_coercions(Join["\n"]);
     
     has file_contents => (
        is     => "ro",
        isa    => $FileLines,
        coerce => 1,
     );
      

Constants¶

"Types::Standard::STRICTNUM"

Indicates whether Num is an alias for StrictNum. (It is usually an alias for LaxNum.)

Environment¶

"PERL_TYPES_STANDARD_STRICTNUM"

Switches to more strict regexp-based number checking instead of using "looks_like_number".

"PERL_TYPE_TINY_XS"

If set to false, can be used to suppress the loading of XS implementions of some type constraints.

"PERL_ONLY"

If "PERL_TYPE_TINY_XS" does not exist, can be set to true to suppress XS usage similarly. (Several other CPAN distributions also pay attention to this environment variable.)