table of contents
- bullseye 1:4.10.0-1
- bullseye-backports 1:4.14.0-4~bpo11+1
- testing 1:4.14.0-4
- unstable 1:4.14.0-4
SCP(1) | General Commands Manual | SCP(1) |
NAZWA¶
scp
— OpenSSH
secure file copy
SKŁADNIA¶
scp
[-346ABCOpqRrsTv
] [-c
cipher] [-D
sftp_server_path] [-F
ssh_config] [-i
identity_file] [-J
destination] [-l
limit] [-o
ssh_option] [-P
port] [-S
program] source ... target
OPIS¶
scp
copies files between hosts on a
network.
It uses ssh(1) for data transfer, and uses the same authentication and provides the same security as a login session.
scp
will ask for passwords or passphrases
if they are needed for authentication.
The source and target
may be specified as a local pathname, a remote host with optional path in
the form [user@]host:[path], or a URI in the form
scp://[user@]host[:port][/path]. Local file names
can be made explicit using absolute or relative pathnames to avoid
scp
treating file names containing ‘:’
as host specifiers.
When copying between two remote hosts, if the URI format is used,
a port cannot be specified on the
target if the -R
option is
used.
Dostępne są następujące opcje:
-3
- Copies between two remote hosts are transferred through the local host.
Without this option the data is copied directly between the two remote
hosts. Note that, when using the legacy SCP protocol (via the
-O
flag), this option selects batch mode for the second host asscp
cannot ask for passwords or passphrases for both hosts. This mode is the default. -4
- Wymusza na
scp
używanie tylko adresów IPv4. -6
- Wymusza na
scp
używanie tylko adresów IPv6. -A
- Allows forwarding of ssh-agent(1) to the remote system. The default is not to forward an authentication agent.
-B
- Wybiera tryb wsadowy (nie pyta o hasła i frazy kodujące).
-C
- Włączenie kompresji. Przekazuje flagę
-C
do programu ssh(1), włączającą kompresję danych. -c
szyfr- Wybiera szyfr używany do kodowania danych. Opcja ta jest przekazywana bezpośrednio do ssh(1).
-D
sftp_server_path- When using the SFTP protocol support via
-M
, connect directly to a local SFTP server program rather than a remote one via ssh(1). This option may be useful in debugging the client and server. -F
plik_konfig_ssh- Określa alternatywny plik konfiguracyjny
ssh
. Ta opcja jest bezpośrednio przekazywana do ssh(1). -i
plik_tożsamości- Wybiera plik, z którego odczytywana jest tożsamość (klucz prywatny) dla uwierzytelnienia za pomocą klucza publicznego. Opcja ta jest przekazywana bezpośrednio do ssh(1).
-J
destination- Connect to the target host by first making an
scp
connection to the jump host described by destination and then establishing a TCP forwarding to the ultimate destination from there. Multiple jump hops may be specified separated by comma characters. This is a shortcut to specify aProxyJump
configuration directive. This option is directly passed to ssh(1). -l
limit- Określa maksymalną prędkość transferu danych podaną w Kbit/s.
-O
- Use the legacy SCP protocol for file transfers instead of the SFTP protocol. Forcing the use of the SCP protocol may be necessary for servers that do not implement SFTP, for backwards-compatibility for particular filename wildcard patterns and for expanding paths with a ‘~’ prefix for older SFTP servers.
-o
opcje_ssh- Może być użyte do przekazania opcji programowi
ssh
w formacie opisanym w ssh_config(5). Opcja ta jest użyteczna do przekazywania opcji, dla których nie ma osobnej flagi linii poleceń w programiescp
. Szczegółowe informacje o podanych niżej opcjach i ich możliwych wartościach można znaleźć w podręczniku ssh_config(5).- AddressFamily
- BatchMode
- BindAddress
- BindInterface
- CanonicalDomains
- CanonicalizeFallbackLocal
- CanonicalizeHostname
- CanonicalizeMaxDots
- CanonicalizePermittedCNAMEs
- CASignatureAlgorithms
- CertificateFile
- CheckHostIP
- Ciphers
- Compression
- ConnectionAttempts
- ConnectTimeout
- ControlMaster
- ControlPath
- ControlPersist
- GlobalKnownHostsFile
- GSSAPIAuthentication
- GSSAPIDelegateCredentials
- HashKnownHosts
- Host
- HostbasedAcceptedAlgorithms
- HostbasedAuthentication
- HostKeyAlgorithms
- HostKeyAlias
- Hostname
- IdentitiesOnly
- IdentityAgent
- IdentityFile
- IPQoS
- KbdInteractiveAuthentication
- KbdInteractiveDevices
- KexAlgorithms
- KnownHostsCommand
- LogLevel
- MACs
- NoHostAuthenticationForLocalhost
- NumberOfPasswordPrompts
- PasswordAuthentication
- PKCS11Provider
- Port
- PreferredAuthentications
- ProxyCommand
- ProxyJump
- PubkeyAcceptedAlgorithms
- PubkeyAuthentication
- RekeyLimit
- SendEnv
- ServerAliveInterval
- ServerAliveCountMax
- SetEnv
- StrictHostKeyChecking
- TCPKeepAlive
- UpdateHostKeys
- User
- UserKnownHostsFile
- VerifyHostKeyDNS
-P
port- Specifies the port to connect to on the remote host. Note that this option
is written with a capital ‘P’, because
-p
is already reserved for preserving the times and mode bits of the file. -p
- Preserves modification times, access times, and file mode bits from the source file.
-q
- Tryb cichy: wyłącza pasek postępu oraz ostrzeżenia i komunikaty diagnostyczne z programu ssh(1).
-R
- Copies between two remote hosts are performed by connecting to the origin
host and executing
scp
there. This requires thatscp
running on the origin host can authenticate to the destination host without requiring a password. -r
- Rekursywnie kopiuje całe katalogi. Proszę
zauważyć, że
scp
podąża za dowiązaniami symbolicznymi napotkanymi podczas przechodzenia po drzewie katalogów. -S
program- Nazwa programu używanego do tworzenia zakodowanego połączenia. Program ten musi przyjmować opcje ssh(1),
-T
- Disable strict filename checking. By default when copying files from a
remote host to a local directory
scp
checks that the received filenames match those requested on the command-line to prevent the remote end from sending unexpected or unwanted files. Because of differences in how various operating systems and shells interpret filename wildcards, these checks may cause wanted files to be rejected. This option disables these checks at the expense of fully trusting that the server will not send unexpected filenames. -v
- Tryb gadatliwy. Powoduje, że
scp
i ssh(1) drukują komunikaty debugowe o swoim działaniu. Jest to przydatne w diagnozowaniu problemów z połączeniem, autoryzacją i konfiguracją.
KOD ZAKOŃCZENIA¶
scp
kończy pracę z kodem 0,
jeżeli wszystko odbyło się pomyślnie, lub z
kodem >0 w razie wystąpienia błędu.
ZOBACZ TAKŻE¶
sftp(1), ssh(1), ssh-add(1), ssh-agent(1), ssh-keygen(1), ssh_config(5), sftp-server(8), sshd(8)
HISTORIA¶
scp
jest oparty na programie rcp o kodzie
źródłowym pochodzącym z
BSD, do którego prawa należą do
władz Uniwersytetu Kalifornijskiego.
Since OpenSSH 8.8, scp
has use the SFTP
protocol for transfers by default.
AUTORZY¶
Timo Rinne
<tri@iki.fi>,
Tatu Ylonen
<ylo@cs.hut.fi>
CAVEATS¶
The legacy SCP protocol (selected by the
-O
flag) requires execution of the remote user's
shell to perform glob(3) pattern matching. This requires
careful quoting of any characters that have special meaning to the remote
shell, such as quote characters.
TŁUMACZENIE¶
Autorami polskiego tłumaczenia niniejszej strony podręcznika są: Przemek Borys <pborys@dione.ids.pl> i Robert Luberda <robert@debian.org>
Niniejsze tłumaczenie jest wolną dokumentacją. Bliższe informacje o warunkach licencji można uzyskać zapoznając się z GNU General Public License w wersji 3 lub nowszej. Nie przyjmuje się ŻADNEJ ODPOWIEDZIALNOŚCI.
Błędy w tłumaczeniu strony podręcznika prosimy zgłaszać na adres listy dyskusyjnej manpages-pl-list@lists.sourceforge.net
February 23, 2022 | Debian |