| MINIUPNPD(8) | System Manager's Manual | MINIUPNPD(8) |
NAME¶
miniupnpd - UPnP Internet Gateway Device Daemon
SYNOPSIS¶
miniupnpd [--version] [-f config_file] [-i ext_ifname] [-I ext_ifname6] [-o ext_ip] [-a listening_ip] [-p port] [-d] [-U] [-S] [-N] [-u uuid] [-s serial] [-m model_number] [-t notify_interval] [-P pid_filename] [-B down up] [-w url] [-r clean_ruleset_interval] [-A permission rule] [-b BOOTID] [-1]
DESCRIPTION¶
miniupnpd act as a UPnP Internet Gateway Device. It is designed to run on the gateway between the internet and a NAT'ed LAN. It provides an interface, as defined in the UPnP standard, for enabling clients on the LAN to ask for port redirections.
OPTIONS¶
- -f config_file
- load the config from file.
- -i ext_ifname
- interface used to connect to the internet.
- -o ext_ip
- address used to connect to the internet. default address of the interface will be used if not specified.
- -a listening_ip
- address on the LAN. -a option can by used multiple time if LAN is subdivised in several subnetworks.
- -p port
- port used for HTTP.
- -d
- debug mode : do not go to background, output messages on console and do not filter out low priority messages.
- -U
- report system uptime instead of daemon uptime to clients.
- -S
- sets "secure" mode : clients can only add mappings to their own ip
- -N
- enables NAT-PMP functionality.
- -u uuid
- set the uuid of the UPnP Internet Gateway Device.
- -s serial
- serial number for the UPnP Internet Gateway Device.
- -m model_number
- model number for the UPnP Internet Gateway Device.
- -t notify_interval
- SSDP notify interval in seconds : SSDP announce messages will be broadcasted at this interval.
- -P pid_filename
- pid file. default is /var/run/miniupnpd.pid
- -B down up
- download and upload bitrates reported to clients.
- -w url
- presentation url. default is first address on LAN, port 80.
- -r clean_ruleset_interval
- (minimum) interval between unused rules cleaning checks.
- -A permission rule
- use following syntax for permission rules :
(allow|deny) (external port range) ip/mask (internal port range)
examples :
"allow 1024-65535 192.168.1.0/24 1024-65535"
"deny 0-65535 0.0.0.0/0 0-65535" - -b BOOTID
- sets the value of BOOTID.UPNP.ORG SSDP header
- -1
- force reporting IGDv1 in rootDesc when compiled as IGDv2 *use with care*