NAME¶

adelsystem_cbi - Driver for the ADELSYSTEM CB/CBI DC-UPS

SYNOPSIS¶

adelsystem_cbi -h

adelsystem_cbi -a DEVICE_NAME [OPTIONS]

SUPPORTED HARDWARE¶

This is the driver for the adelsystem cb/cbi dc-ups devices.

The driver has been tested against CBI2801224A, all in one 12/24Vdc DC-UPS.

More information about this UPS can be found here:

EXTRA ARGUMENTS¶

This driver supports the following optional settings in the ups.conf(5) file:

CONFIGURATION¶

Here is an example of adelsystem_cbi driver configuration in ups.conf file:

[adelsystem_cbi]


  driver = adelsystem_cbi


  port = /dev/ttyUSB0


  desc = "adelsystem cb/cbi ups driver"


  # serial settings


  ser_baud_rate = 9600


  ser_parity = N


  ser_data_bit = 8


  ser_stop_bit = 1


  # modbus slave id


  dev_slave_id = 5

INSTANT COMMANDS¶

This driver support the following instant commands:

load.off

INSTALLATION¶

This driver is not built by default. You can build it by installing libmodbus and running configure --with-modbus=yes.

You also need to give proper permissions on the local serial device file (/dev/ttyUSB0 for example) to allow the run-time NUT driver user account to access it.

AUTHOR¶

Dimitris Economou <dimitris.s.economou@gmail.com>

SEE ALSO¶