SYNOPSIS¶

C or C++:

#include <mpp/shmem.h>
void shmem_alltoall32(void *target, const void *source,


  size_t nelems, int PE_start, int logPE_stride,


  int PE_size, long *pSync)
void shmem_alltoall64(void *target, const void *source,


  size_t nelems, int PE_start, int logPE_stride,


  int PE_size, long *pSync)
void shmem_alltoalls32(void *target, const void *source,


  ptrdiff_t dst, ptrdiff_t sst,


  size_t nelems, int PE_start, int logPE_stride,


  int PE_size, long *pSync)
void shmem_alltoalls64(void *target, const void *source,


  ptrdiff_t dst, ptrdiff_t sst,


  size_t nelems, int PE_start, int logPE_stride,


  int PE_size, long *pSync)

Fortran:

INCLUDE "mpp/shmem.fh"
INTEGER dst, sst, nelems, PE_root, PE_start, logPE_stride, PE_size
INTEGER pSync(SHMEM_ALLTOALL_SYNC_SIZE)
CALL SHMEM_ALLTOALL32(target, source, nelems,
& PE_start, logPE_stride, PE_size, fIpSync)
CALL SHMEM_ALLTOALL64(target, source, nelems,
& PE_start, logPE_stride, PE_size, pSync)
CALL SHMEM_ALLTOALLS32(target, source, dst, sst, nelems,
& PE_start, logPE_stride, PE_size, pSync)
CALL SHMEM_ALLTOALLS64(target, source, dst, sst, nelems,
& PE_start, logPE_stride, PE_size, pSync)

DESCRIPTION¶

The shmem_alltoalls routines are collective routines. Each PE in the Active set exchanges nelems strided data elements of size 32 bits (for shmem_alltoalls32) or 64 bits (for shmem_alltoalls64) with all other PEs in the set. Both strides, dst and sst, must be greater than or equal to 1. The sst*jth block sent from PE i to PE j is placed in the dst*ith block of the dest data object on PE j. As with all OpenSHMEM collective routines, these routines assume that only PEs in the Active set call the routine. If a PE not in the Active set calls an OpenSHMEM collective routine, undefined behavior results. The values of arguments dst, sst, nelems, PE_start, logPE_stride, and PE_size must be equal on all PEs in the Active set. The same dest and source data objects, and the same pSync work array must be passed to all PEs in the Active set. Before any PE calls to a shmem_alltoalls routine, the following conditions must exist (synchronization via a barrier or some other method is often needed to ensure this): The pSync array on all PEs in the Active set is not still in use from a prior call to a shmem_alltoalls routine. The dest data object on all PEs in the Active set is ready to accept the shmem_alltoalls data. Upon return from a shmem_alltoalls routine, the following is true for the local PE: Its dest symmetric data object is completely updated and the data has been copied out of the source data object. The values in the pSync array are restored to the original values.

The arguments are as follows:

A symmetric data object with one of the following data types:

target A symmetric data object large enough to receive the combined total of nelems elements from each PE in the Active set.

Upon return from a shmem_alltoalls routine, the following is true for the local PE: Its dest symmetric data object is completely updated and the data has been copied out of the source data object. The values in the pSync array are restored to the original values.

The values of arguments PE_root, PE_start, logPE_stride, and PE_size must be equal on all PEs in the active set. The same target and source data objects and the same pSync work array must be passed to all PEs in the active set.

Before any PE calls a alltoall routine, you must ensure that the following conditions exist (synchronization via a barrier or some other method is often needed to ensure this): The pSync array on all PEs in the active set is not still in use from a prior call to a alltoall routine. The target array on all PEs in the active set is ready to accept the alltoall data.

NOTES¶

The terms collective and symmetric are defined in intro_shmem(3).

All SHMEM alltoall routines restore pSync to its original contents. Multiple calls to SHMEM routines that use the same pSync array do not require that pSync be reinitialized after the first call.

You must ensure the that the pSync array is not being updated by any PE in the active set while any of the PEs participates in processing of a SHMEM broadcast routine. Be careful to avoid these situations: If the pSync array is initialized at run time, some type of synchronization is needed to ensure that all PEs in the working set have initialized pSync before any of them enter a SHMEM routine called with the pSync synchronization array. A pSync array may be reused on a subsequent SHMEM broadcast routine only if none of the PEs in the active set are still processing a prior SHMEM alltoall routine call that used the same pSync array. In general, this can be ensured only by doing some type of synchronization. However, in the special case of SHMEM routines being called with the same active set, you can allocate two pSync arrays and alternate between them on successive calls.

EXAMPLES¶

C/C++ example:

#include <shmem.h>
#include <stdio.h>
long pSync[SHMEM_ALLTOALL_SYNC_SIZE];
int main(void)
{
int64_t *source, *dest;
int i, count, pe;
shmem_init();
count = 2;
dest = (int64_t*) shmem_malloc(count * shmem_n_pes() * sizeof(int64_t));
source = (int64_t*) shmem_malloc(count * shmem_n_pes() * sizeof(int64_t));
/* assign source values */
for (pe=0; pe <shmem_n_pes(); pe++){
for (i=0; i<count; i++){
source[(pe*count)+i] = shmem_my_pe() + pe;
dest[(pe*count)+i] = 9999;
}
}
for (i=0; i< SHMEM_ALLTOALLS_SYNC_SIZE; i++) {
pSync[i] = SHMEM_SYNC_VALUE;
}
/* wait for all PEs to initialize pSync */
shmem_barrier_all();
/* alltoalls on all PES */
shmem_alltoalls64(dest, source, 1, 1, count, 0, 0, shmem_n_pes(), pSync);
/* verify results */
for (pe=0; pe<shmem_n_pes(); pe++) {
for (i=0; i<count; i++){
if (dest[(pe*count)+i] != shmem_my_pe() + pe) {
printf("[%d] ERROR: dest[%d]=%ld, should be %d,
shmem_my_pe(),(pe*count)+i,dest[(pe*count)+i],
shmem_n_pes() + pe);
}
}
}
shmem_barrier_all();
shmem_free(dest);
shmem_free(source);
shmem_finalize();
return 0;
}

SEE ALSO:

COPYRIGHT¶

2003-2024, The Open MPI Community