Scroll to navigation

passwd(1) User Commands passwd(1)

НАЗВА

passwd - зміна пароля користувача

КОРОТКИЙ ОГЛЯД

passwd [options] [LOGIN]

ОПИС

The passwd command changes passwords for user accounts. A regular user can only change the password for their own account, while the superuser can change the password for any account. The passwd also changes the account or associated password validity period.

Зміни паролів

If the account has a non-empty password, the user is first prompted to enter their current password. The entered password is encrypted and compared to the stored value. The user has only one attempt to enter the correct password. The superuser can bypass this step to allow changing forgotten passwords.

After the password has been entered, password aging information is checked to determine if the user is permitted to change the password at this time. If not, passwd refuses to change the password and exits.

The user is then prompted twice for a replacement password. The second entry is compared against the first and both are required to match for the password to be changed.

Then, the password is tested for complexity. passwd rejects passwords that do not meet the complexity requirements. Do not include the system default erase or kill characters.

Підказки для паролів користувача

The security of a password depends on the strength of the encryption algorithm and the size of the key space. The legacy UNIX System encryption method is based on the NBS DES algorithm. More recent methods are now recommended (see ENCRYPT_METHOD). The size of the key space depends on the randomness of the selected password.

Compromises in password security normally result from careless password selection or handling. For this reason, you should not select a password which appears in a dictionary or one that must be written down. The password should also not be a proper name, your license number, birth date, or street address. Any of these may be used as guesses to violate system security.

As a general guideline, passwords should be long and random. It's fine to use simple character sets, such as passwords consisting only of lowercase letters, if that helps memorizing longer passwords. For a password consisting only of lowercase English letters randomly chosen, and a length of 32, there are 26^32 (approximately 2^150) different possible combinations. Being an exponential equation, it's apparent that the exponent (the length) is more important than the base (the size of the character set).

You can find advice on how to choose a strong password on https://en.wikipedia.org/wiki/Password_strength

ПАРАМЕТРИ

The options which apply to the passwd command are:

-a, --all

This option can be used only with -S and causes show status for all users.

-d, --delete

Deletes a user's password, making it empty. This command sets the account to be passwordless.

-e, --expire

Негайно завершити строк дії пароля облікового запису. Результатом є те, що система вимагатиме від користувача змінити пароль під час наступного входу до системи.

-h, --help

Показати довідкове повідомлення і завершити роботу.

-i, --inactive INACTIVE

This option is used to disable an account after the password has been expired for a number of days. After a user account has had an expired password for INACTIVE days, the user may no longer sign on to the account.

-k, --keep-tokens

Вказати, що зміну пароля має бути виконано лише для жетонів (паролів) розпізнавання, строк дії яких вичерпано. Користувач бажає зберегти попередню дію жетонів, строк дії яких не вичерпано.

-l, --lock

Заблокувати пароль іменованого облікового запису. За допомогою цього параметра можна вимкнути пароль, змінивши його на значення, яке не відповідає зашифрованому значенню (буде додано ´!´ на початку пароля).

Note that this does not disable the account. The user may still be able to login using another authentication token (e.g. an SSH key). To disable the account, administrators should use usermod --expiredate 1 (this sets the account's expire date to 1970-01-02).

Користувачі із заблокованим паролем не зможуть змінювати власний пароль.

-n, --mindays MIN_DAYS

Set the minimum number of days between password changes to MIN_DAYS. A value of zero for this field indicates that the user may change their password at any time.

-q, --quiet

Режим без повідомлень.

-r, --repository REPOSITORY

change password in REPOSITORY repository

-R, --root CHROOT_DIR

Apply changes in the CHROOT_DIR directory and use the configuration files from the CHROOT_DIR directory. Only absolute paths are supported.

-P, --prefix PREFIX_DIR

Apply changes to configuration files under the root filesystem found under the directory PREFIX_DIR. This option does not chroot and is intended for preparing a cross-compilation target. Some limitations: NIS and LDAP users/groups are not verified. No PAM support. No SELINUX support.

-S, --status

Вивести дані щодо стану облікового запису. Дані щодо стану складаються з 7 полів. Першим полем є назва облікового запису користувача. Друге поле вказує на те, чи є обліковий запис таким, для якого заблоковано пароль (L), немає пароля (NP) або має придатний до користування пароль (P). Третє поле задає дату останньої зміни пароля. Наступними чотирма полями є мінімальний вік, максимальний вік, період попередження та період неактивності для пароля. Ці значення віку виражаються у днях.

-u, --unlock

Unlock the password of the named account. This option re-enables a password by changing the password back to its previous value (to the value before using the -l option).

-w, --warndays WARN_DAYS

Set the number of days of warning before a password change is required. The WARN_DAYS option is the number of days prior to password expiration during which the user is warned that their password is about to expire.

-x, --maxdays MAX_DAYS

Set the maximum number of days a password remains valid. After MAX_DAYS, the password is required to be changed.

Passing the number -1 as MAX_DAYS will remove checking a password's validity.

-s, --stdin

This option is used to indicate that passwd should read the new password from standard input, which can be a pipe.

ЗАСТЕРЕЖЕННЯ

Перевірка складності пароля може бути різною у різних системах. Система вимагатиме вибрати пароль, який буде достатньо складним на думку її розробників.

Можливо, користувачі не зможуть змінити свій пароль у системі, якщо увімкнено NIS, і користувачі не увійшли до сервера NIS.

passwd uses PAM to authenticate users and to change their passwords.

ФАЙЛИ

/etc/passwd

Відомості щодо облікових записів користувача.

/etc/shadow

Відомості щодо захищених облікових записів користувачів.

/etc/pam.d/passwd

PAM configuration for passwd.

ЗНАЧЕННЯ ВИХОДУ

The passwd command exits with the following values:

0

success

1

permission denied

2

invalid combination of options

3

unexpected failure, nothing done

4

unexpected failure, passwd file missing

5

passwd file busy, try again

6

invalid argument to option

10

an error was returned by pam(3)

ДИВ. ТАКОЖ

chpasswd(8), makepasswd(1), passwd(5), shadow(5), usermod(8).

The following web page comically (yet correctly) compares the strength of two different methods for choosing a password: "https://xkcd.com/936/"

16/09/2025 shadow-utils 4.18.0