Scroll to navigation

POSTQUEUE(1) General Commands Manual POSTQUEUE(1)

NAME

postqueue - Postfix queue control

SYNOPSIS

To flush the mail queue:
postqueue [-v] [-c config_dir] -f
postqueue [-v] [-c config_dir] -i queue_id
postqueue [-v] [-c config_dir] -s site
To list the mail queue:
postqueue [-v] [-c config_dir] -j
postqueue [-v] [-c config_dir] -p

DESCRIPTION


The postqueue(1) command implements the Postfix user interface for queue management. It implements operations that are traditionally available via the sendmail(1) command. See the postsuper(1) command for queue operations that require super-user privileges such as deleting a message from the queue or changing the status of a message.

The following options are recognized:

The main.cf configuration file is in the named directory instead of the default configuration directory. See also the MAIL_CONFIG environment setting below.
Flush the queue: attempt to deliver all queued mail.

This option implements the traditional "sendmail -q" command, by contacting the Postfix qmgr(8) daemon.

Warning: flushing undeliverable mail frequently will result in poor delivery performance of all other mail.

Schedule immediate delivery of deferred mail with the specified queue ID.

This option implements the traditional sendmail -qI command, by contacting the flush(8) server.

This feature is available with Postfix version 2.4 and later.

Produce a queue listing in JSON LINES format, based on output from the showq(8) daemon. See "JSON OBJECT FORMAT" below for details.

This feature is available in Postfix 3.1 and later.

Produce a traditional sendmail-style queue listing. This option implements the traditional mailq command, by contacting the Postfix showq(8) daemon.

Each queue entry shows the queue file ID, message size, arrival time, sender, and the recipients that still need to be delivered. If mail could not be delivered upon the last attempt, the reason for failure is shown. The queue ID string is followed by an optional status character:

*
The message is in the active queue, i.e. the message is selected for delivery.
!
The message is in the hold queue, i.e. no further delivery attempt will be made until the mail is taken off hold.
#
The message is forced to expire. See the postsuper(1) options -e or -f.

This feature is available in Postfix 3.5 and later.

Schedule immediate delivery of all mail that is queued for the named site. A numerical site must be specified as a valid RFC 5321 address literal enclosed in [], just like in email addresses. The site must be eligible for the "fast flush" service. See flush(8) for more information about the "fast flush" service.

This option implements the traditional "sendmail -qRsite" command, by contacting the Postfix flush(8) daemon.

Enable verbose logging for debugging purposes. Multiple -v options make the software increasingly verbose. As of Postfix 2.3, this option is available for the super-user only.

JSON OBJECT FORMAT



Each JSON object represents one queue file; it is emitted as a
    single text line followed by a newline character.


Object members have string values unless indicated otherwise.
    Programs should ignore object members that are not listed here; the list of
    members is expected to grow over time.



  

  
The name of the queue where the message was found. Note that the contents
      of the mail queue may change while it is being listed; some messages may
      appear more than once, and some messages may be missed.

  

  
The queue file name. The queue_id may be reused within a Postfix instance
      unless "enable_long_queue_ids = true" and time is monotonic.
      Even then, the queue_id is not expected to be unique between different
      Postfix instances. Management tools that require a unique name should
      combine the queue_id with the myhostname setting of the Postfix
    instance.

  

  
The number of seconds since the start of the UNIX epoch.

  

  
The number of bytes in the message header and body. This number does not
      include message envelope information. It is approximately equal to the
      number of bytes that would be transmitted via SMTP including the
      <CR><LF> line endings.

  

  
The message is forced to expire (true or false). See the
      postsuper(1) options -e or -f.
    
This feature is available in Postfix 3.5 and later.

  

  

  
The envelope sender address.

  

  
An array containing zero or more objects with members:







  

  
One recipient address.

  

  
If present, the reason for delayed delivery. Delayed recipients may have
      no delay reason, for example, while delivery is in progress, or after the
      system was stopped before it could record the reason.










SECURITY




This program is designed to run with set-group ID privileges, so
    that it can connect to Postfix daemon processes.






STANDARDS


RFC 7159 (JSON notation)






DIAGNOSTICS




Problems are logged to syslogd(8) or postlogd(8),
    and to the standard error stream.






ENVIRONMENT





  

  
Directory with the main.cf file. In order to avoid exploitation of
      set-group ID privileges, a non-standard directory is allowed only if:






    
  
  • The name is listed in the standard main.cf file with the
      alternate_config_directories configuration parameter.
    • 
  
  • The command is invoked by the super-user.
    • 









CONFIGURATION PARAMETERS




The following main.cf parameters are especially relevant to
    this program. The text below provides only a parameter summary. See
    postconf(5) for more details including examples.



  

  
A list of non-default Postfix configuration directories that may be
      specified with "-c config_directory" on the command line (in the
      case of sendmail(1), with the "-C" option), or via the
      MAIL_CONFIG environment parameter.

  

  
The default location of the Postfix main.cf and master.cf configuration
      files.

  

  
The location of all postfix administrative commands.

  

  
Optional list of destinations that are eligible for per-destination
      logfiles with mail that is queued to those destinations.

  

  
The list of environment variables that a privileged Postfix process will
      import from a non-Postfix parent process, or name=value environment
      overrides.

  

  
The location of the Postfix top-level queue directory.

  

  
The syslog facility of Postfix logging.

  

  
A prefix that is prepended to the process name in syslog records, so that,
      for example, "smtpd" becomes "prefix/smtpd".

  

  
The time limit for sending a trigger to a Postfix daemon (for example, the
      pickup(8) or qmgr(8) daemon).




Available in Postfix version 2.2 and later:



  

  
List of users who are authorized to flush the queue.

  

  
List of users who are authorized to view the queue.








FILES


/var/spool/postfix, mail queue






SEE ALSO


qmgr(8), queue manager
showq(8), list mail queue
flush(8), fast flush service
sendmail(1), Sendmail-compatible user interface
postsuper(1), privileged queue operations
postlogd(8), Postfix logging
syslogd(8), system logging






README FILES




Use "postconf readme_directory" or
    "postconf html_directory" to locate this information.


ETRN_README, Postfix ETRN howto






LICENSE




The Secure Mailer license must be distributed with this
  software.






HISTORY






The postqueue command was introduced with Postfix version 1.1.






AUTHOR(S)


Wietse Venema
IBM T.J. Watson Research
P.O. Box 704
Yorktown Heights, NY 10598, USA
Wietse Venema
Google, Inc.
111 8th Avenue
New York, NY 10011, USA