Scroll to navigation

UPDATE_FLASH(8) PowerLinux Service Tools UPDATE_FLASH(8)

NAME

update_flash - manage system and service processor firmware

SYNOPSIS

/usr/sbin/update_flash [-v|-n] -f firmware.img
/usr/sbin/update_flash -h
/usr/sbin/update_flash -c
/usr/sbin/update_flash -r
/usr/sbin/update_flash -s

DESCRIPTION

The update_flash script is used to validate, update and manage firmware on an IBM Power Systems servers.

VALIDATION

    When used with the -v option, the script will ONLY perform validation
      of the image file. Regardless of the outcome of the validation, no actual
      flash will occur. This option is only useful on machines that support
      validation of firmware images.
UPDATE

    When used with only the -f option and an image file name, the script
      will attempt to update the system firmware with the given image. If the
      machine has the ability to pre-validate the image, this will be done
      automatically before the flash. If the machine is not capable of
      pre-validation, or if validation passes, this script will upload the
      firmware image into the kernel and will perform a shutdown -r now
      which will reboot the system. The flash will occur at the end of the
      reboot process.
    

WARNING: The system WILL be rebooted! Wait until the flash process has completed. This can be anywhere from 2 minutes to 20 minutes (or more) depending on the system. The control panel display will show that the system is flashing. Failure to wait may render a system inoperable.

NOTE: If machine supports two firmware image areas, update is always applied to the temporary image area. The -c option is the normal means by which a temporary image is committed to the permanent side (see MANAGEMENT). However, if a platform is running from a temporary image when an update is to be applied, then the platform may automatically commit the current temporary image to the permanent side to allow the new image to be updated to the temporary image area. The -v option can be used to determine what would result from an attempt to update a flash image.

The -n option will prevent the automatic overwrite of the permanent image area and abandon the update entirely.

To apply an update to the temporary image area without overwriting the permanent image area, the system must first be running with the permanent image. The temporary image can then be rejected (see MANAGEMENT). Subsequently, the update can be applied.

MANAGEMENT

    When used with the -c option, the script will commit the temporary
      image to the permanent side. In order to use this, the machine must be
      running on the temporary image. This option is only useful on machines
      supporting two firmware image areas.
    

When used with the -r option, the script will reject the temporary image. In order to use this, the machine must be running on the permanent image. To switch from the temporary image to the permanent image, you must reboot from the permanent image -- for example, using the ASMI or HMC. This option is only useful on machines supporting two firmware image areas.

OPTIONS

Print the usage message and exit.
Supply the filename to flash (required).
Validate ONLY with specified image file.
Do not overwrite permanent side image automatically.
Commit temporary image to permanent side.
Reject temporary image.
Determine if partition has access to perform flash image management.

EXAMPLES

To determine if partition has authority to flash image:

# update_flash -s

For a typical firmware update (this may commit temporary to permanent):

# update_flash -f 01AL740_100_042.img

To update only if permanent side will not be overwritten:

# update_flash -n -f 01AL740_100_042.img

To validate an image:

# update_flash -v -f 01AL740_100_042.img

To commit temporary image to permanent (note that the system must be running on temporary image):

# update_flash -c

To reject temporary image, and copy to permanent to temporary (note that the system must be running on permanent image):

# update_flash -r

EXIT STATUS

All cases:

3 - Usage error
4 - Permission error
6 - Unexpected problem with /proc filesystem access
7 - Error loading module
8 - RTAS(pSeries)/OPAL(PowerNV) call failed
9 - User aborted operation
Determine if partition has authority to manage image (-s):

0 - Flash image management is supported
1 - Flash image management is not supported on this system
Validation (-v):

0 - Validation successful
Update ([-n] -f):

5 - Image file error 10 - Auto overwrite permanent side image 15 - Update Access Key Expired
Manage (-c|-r):

0 - Temporary image commit/reject successful

FILES

pSeries

rtas_flash kernel module
/proc/ppc64/rtas/firmware_flash (provided by kernel module)
PowerNV

/sys/firmware/opal/image
/sys/firmware/opal/{validate/manage/update}_flash

NOTES

Download firmware
Firmware may be downloaded from the IBM website. Instructions for downloading and installing the firmware image are also there, and information there will be more up-to-date than this page.

Firmware update failure
Various conditions can lead to a firmware update failure. If you receive an authentication-related error, such as:

update_flash: RTAS: validate() Partition does not have authority
-or-
update_flash: System does not have authority to perform firmware update.

This can reflect either 1) That the permission is not set (correctable through the ASM interface, System -> Firmware Update Policy, or through an HMC if attached.

-or-

2) Firmware still believes an HMC is attached. This can be corrected by following the steps outlined here:

http://publib.boulder.ibm.com/infocenter/powersys/v3r1m5/index.jsp?topic=/p7hatl/iphblresetserverp6.htm

RPM format image
For "rpm format" images, the file will have a .rpm extension. It can be extracted using below command:


rpm2cpio <rpm filename> | cpio -idmv

This will extract files under current directory. Pass <image>.img file to this script.

AIX format image
For older "AIX format" images, the file will have a .BIN extension. This zip file happens to be an AIX binary, but it can be extracted with the unzip command (with password from the web page):


unzip 70286C4F.BIN

This should produce a file with a .img extension. This image file is what should be flashed.

8 May 2013 Linux