Scroll to navigation

Smokeping_probes_WebProxyFilter(3) SmokePing Smokeping_probes_WebProxyFilter(3)

NAME

Smokeping::probes::WebProxyFilter - tests webproxy filter performance and function.

OVERVIEW

This probe tests if your filtering webproxy is working properly. Drawing from a list of forbidden websites, it tries to establish a connection to each one of them and registers a 'loss' when it succeeds.

If you want to test availability of a website, use the EchoPingHttp probe.

SYNOPSIS

 *** Probes ***
 +WebProxyFilter
 forks = 5
 maxsize = 2000
 min_interval = 0.1
 offset = 50%
 step = 300
 timeout = 15
 useragent = SmokePing/2.x (WebProxyFilter Probe)
 # The following variables can be overridden in each target section
 /^influx_.+/ = influx_location = In the basement
 deny_re = Access Prohibited
 more_hosts = www.playboy.com, www.our-competition.com
 pings = 5
 timeout = 2
 # [...]
 *** Targets ***
 probe = WebProxyFilter # if this should be the default probe
 # [...]
 + mytarget
 # probe = WebProxyFilter # if the default probe is something else
 host = my.host
 /^influx_.+/ = influx_location = In the basement
 deny_re = Access Prohibited
 more_hosts = www.playboy.com, www.our-competition.com
 pings = 5
 timeout = 2

DESCRIPTION

The probe uses the LWP::UserAgent module to retrieve a series of webpages. It expects to get the firewalls 'site-prohibited' page. Any other response (or a real loss) gets logged as a loss and can be used to trigger an alarm.

The probe tries to be nice to the firewall and waits at least X seconds between starting filetransfers, where X is the value of the probe specific `min_interval' variable (1 by default).

Many variables can be specified either in the probe or in the target definition, the target-specific variable will override the prove-specific variable.

VARIABLES

Supported probe-specific variables:

Run this many concurrent processes at maximum

Example value: 5

Default value: 5

How much of the webpage should be retrieved.

Default value: 2000

The minimum interval between each starting GETs in seconds.

Example value: 0.1

Default value: 1

If you run many probes concurrently you may want to prevent them from hitting your network all at the same time. Using the probe-specific offset parameter you can change the point in time when each probe will be run. Offset is specified in % of total interval, or alternatively as 'random', and the offset from the 'General' section is used if nothing is specified here. Note that this does NOT influence the rrds itself, it is just a matter of when data acquisition is initiated. (This variable is only applicable if the variable 'concurrentprobes' is set in the 'General' section.)

Example value: 50%

Duration of the base interval that this probe should use, if different from the one specified in the 'Database' section. Note that the step in the RRD files is fixed when they are originally generated, and if you change the step parameter afterwards, you'll have to delete the old RRD files or somehow convert them. (This variable is only applicable if the variable 'concurrentprobes' is set in the 'General' section.)

Example value: 300

How long a single 'ping' takes at maximum

Example value: 15

Default value: 5

The web browser we claim to be, just in case the FW is interested

Default value: SmokePing/2.x (WebProxyFilter Probe)

Supported target-specific variables:

/^influx_.+/
This is a tag that will be sent to influxdb and has no impact on the probe measurement. The tag name will be sent without the "influx_" prefix, which will be replaced with "tag_" instead. Tags can be used for filtering.

Example value: influx_location = In the basement

Regular expression, matching the 'deny' response from the firewall

Example value: Access Prohibited

A comma separated list of banned websites to test in addition to the one specified in the host variable. The websites will be tested one after the other in one round, this means that while normal probes do run the same test several times in a row, this one will alter the webpage with each round. The reason for this is, that even though we try to retrieve remote webpages, the answer will come from the firewall every time, so we kill two birds in one go. First we test the firewalls latency and second we make sure its filter works properly.

Example value: www.playboy.com, www.our-competition.com

How many pings should be sent to each target, if different from the global value specified in the Database section. Note that the number of pings in the RRD files is fixed when they are originally generated, and if you change this parameter afterwards, you'll have to delete the old RRD files or somehow convert them.

Example value: 5

Timeout in seconds for the test complete.

Example value: 2

Default value: 2

AUTHORS

Tobias Oetiker <tobi@oetiker.ch> sponsored by Virtela

BUGS

This probe is somewhat unortodox, since it regards the successful retrieval of a banned webpage as a loss.

2024-02-04 2.8.2