NAME¶

sudoreplay — replay sudo session logs

SYNOPSIS¶

DESCRIPTION¶

sudoreplay plays back or lists the output logs created by sudo. When replaying, sudoreplay can play the session back in real-time, or the playback speed may be adjusted (faster or slower) based on the command line options.

The ID should either be a six character sequence of digits and upper case letters, e.g., “0100A5” or a path name. The ID may include an optional @offset suffix which may be used to start replaying at a specific time offset. The @offset is specified as a number in seconds since the start of the session with an optional decimal fraction.

Path names may be relative to the I/O log directory /var/log/sudo-io (unless overridden by the -d option) or fully qualified, beginning with a ‘/’ character. When a command is run via sudo with log_output enabled in the sudoers file, a “TSID=ID” string is logged via syslog(3) or to the sudo log file. The ID may also be determined using sudoreplay's list mode.

In list mode, sudoreplay can be used to find the ID of a session based on a number of criteria such as the user, tty, or command run.

In replay mode, if the standard input and output are connected to a terminal and the -n option is not specified, sudoreplay will operate interactively. In interactive mode, sudoreplay will attempt to adjust the terminal size to match that of the session and write directly to the terminal (not all terminals support this). Additionally, it will poll the keyboard and act on the following keys:

‘\n’ or ‘\r’

Skip to the next replay event; useful for long pauses.

‘ ’ (space)

Pause output; press any key to resume.

‘<’

Reduce the playback speed by one half.

‘>’

Double the playback speed.

The session can be interrupted via control-C. When the session has finished, the terminal is restored to its original size if it was changed during playback.

The options are as follows:

-d dir, --directory=dir

Store session logs in dir instead of the default, /var/log/sudo-io.

-f filter, --filter=filter

Select which I/O type(s) to display. By default, sudoreplay will display the command's standard output, standard error, and tty output. The filter argument is a comma-separated list, consisting of one or more of following: stdin, stdout, stderr, ttyin, and ttyout.

-F, --follow

Enable “follow mode”. When replaying a session, sudoreplay will ignore end-of-file and keep replaying until the log is complete. This can be used to replay a session that is still in progress, similar to “tail -f”. An I/O log file is considered to be complete when the write bits have been cleared on the session's timing file. Versions of sudo prior to 1.9.1 do not clear the write bits upon completion.

-h, --help

Display a short help message to the standard output and exit.

-l, --list [search expression]

Enable “list mode”. In this mode, sudoreplay will list available sessions in a format similar to the sudo log file format, sorted by file name (or sequence number). Any control characters present in the log data are formatted in octal with a leading ‘#’ character. For example, a horizontal tab is displayed as ‘#011’ and an embedded carriage return is displayed as ‘#015’. Space characters in the command name and arguments are also formatted in octal.

If a search expression is specified, it will be used to restrict the IDs that are displayed. An expression is composed of the following predicates:

command pattern

Evaluates to true if the command run matches the POSIX extended regular expression pattern.

cwd directory

Evaluates to true if the command was run with the specified current working directory.

fromdate date

Evaluates to true if the command was run on or after date. See Date and time format for a description of supported date and time formats.

group runas_group

Evaluates to true if the command was run with the specified runas_group. Unless a runas_group was explicitly specified when sudo was run this field will be empty in the log.

host hostname

Evaluates to true if the command was run on the specified hostname.

runas runas_user

Evaluates to true if the command was run as the specified runas_user. By default, sudo runs commands as the root user.

todate date

Evaluates to true if the command was run on or prior to date. See Date and time format for a description of supported date and time formats.

tty tty name

Evaluates to true if the command was run on the specified terminal device. The tty name should be specified without the /dev/ prefix, e.g., tty01 instead of /dev/tty01.

user user name

Evaluates to true if the ID matches a command run by user name.

Predicates may be abbreviated to the shortest unique string.

Predicates may be combined using and, or, and ! operators as well as ‘(’ and ‘)’ grouping (parentheses must generally be escaped from the shell). The and operator is optional, adjacent predicates have an implied and unless separated by an or.

-m, --max-wait max_wait

Specify an upper bound on how long to wait between key presses or output data. By default, sudoreplay will accurately reproduce the delays between key presses or program output. However, this can be tedious when the session includes long pauses. When the -m option is specified, sudoreplay will limit these pauses to at most max_wait seconds. The value may be specified as a floating point number, e.g., 2.5. A max_wait of zero or less will eliminate the pauses entirely.

-n, --non-interactive

Do not prompt for user input or attempt to re-size the terminal. The session is written to the standard output, not directly to the user's terminal.

-R, --no-resize

Do not attempt to re-size the terminal to match the terminal size of the session.

-S, --suspend-wait

Wait while the command was suspended. By default, sudoreplay will ignore the time interval between when the command was suspended and when it was resumed. If the -S option is specified, sudoreplay will wait instead.

-s, --speed speed_factor

This option causes sudoreplay to adjust the number of seconds it will wait between key presses or program output. This can be used to slow down or speed up the display. For example, a speed_factor of 2 would make the output twice as fast whereas a speed_factor of .5 would make the output twice as slow.

-V, --version

Print the sudoreplay versions version number and exit.

FILES¶

/etc/sudo.conf

Debugging framework configuration

/var/log/sudo-io

The default I/O log directory.

/var/log/sudo-io/00/00/01/log

Example session log info.

/var/log/sudo-io/00/00/01/log.json

Example session log info (JSON format).

/var/log/sudo-io/00/00/01/stdin

Example session standard input log.

/var/log/sudo-io/00/00/01/stdout

Example session standard output log.

/var/log/sudo-io/00/00/01/stderr

Example session standard error log.

/var/log/sudo-io/00/00/01/ttyin

Example session tty input file.

/var/log/sudo-io/00/00/01/ttyout

Example session tty output file.

/var/log/sudo-io/00/00/01/timing

Example session timing file.

The stdin, stdout and stderr files will be empty unless sudo was used as part of a pipeline for a particular command.

EXAMPLES¶

List sessions run by user millert:

# sudoreplay -l user millert

List sessions run by user bob with a command containing the string vi:

# sudoreplay -l user bob command vi

List sessions run by user jeff that match a regular expression:

# sudoreplay -l user jeff command '/bin/[a-z]*sh'

List sessions run by jeff or bob on the console:

# sudoreplay -l ( user jeff or user bob ) tty console

SEE ALSO¶

script(1), sudo.conf(5), sudo(8)

AUTHORS¶

Many people have worked on sudo over the years; this version consists of code written primarily by:

See the CONTRIBUTORS.md file in the sudo distribution (https://www.sudo.ws/about/contributors/) for an exhaustive list of people who have contributed to sudo.

BUGS¶

If you believe you have found a bug in sudoreplay, you can either file a bug report in the sudo bug database, https://bugzilla.sudo.ws/, or open an issue at https://github.com/sudo-project/sudo/issues. If you would prefer to use email, messages may be sent to the sudo-workers mailing list, https://www.sudo.ws/mailman/listinfo/sudo-workers (public) or <sudo@sudo.ws> (private).

Please not report security vulnerabilities through public GitHub issues, Bugzilla or mailing lists. Instead, report them via email to <Todd.Miller@sudo.ws>. You may encrypt your message with PGP if you would like, using the key found at https://www.sudo.ws/dist/PGPKEYS.

SUPPORT¶

Limited free support is available via the sudo-users mailing list, see https://www.sudo.ws/mailman/listinfo/sudo-users to subscribe or search the archives.

DISCLAIMER¶

sudoreplay is provided “AS IS” and any express or implied warranties, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose are disclaimed. See the LICENSE.md file distributed with sudo or https://www.sudo.ws/about/license/ for complete details.