Choose the output mode, takes one of "classic", "friendly", "table", "json". If "classic", an output very close to the format of /etc/passwd or /etc/group is generated. If "friendly" a more comprehensive and user friendly, human readable output is generated; if "table" a minimal, tabular output is generated; if "json" a JSON formatted output is generated. Defaults to "friendly" if a user/group is specified on the command line, "table" otherwise.

Note that most output formats do not show all available information. In particular, "classic" and "table" show only the most important fields. Various modes also do not show password hashes. Use "json" to view all fields, including any authentication fields.

Added in version 245.

Selects JSON output mode (like --output=json) and selects the precise display mode. Takes one of "pretty" or "short". If "pretty", human-friendly whitespace and newlines are inserted in the output to make the JSON data more readable. If "short", all superfluous whitespace is suppressed.

Added in version 250.

Controls which services to query for users/groups. Takes a list of one or more service names, separated by ":". See below for a list of well-known service names. If not specified all available services are queried at once.

Added in version 245.

Controls whether to include classic glibc/NSS user/group lookups in the output. If --with-nss=no is used any attempts to resolve or enumerate users/groups provided only via glibc NSS is suppressed. If --with-nss=yes is specified such users/groups are included in the output (which is the default).

Added in version 245.

Controls whether to include Varlink user/group lookups in the output, i.e. those done via the User/Group Record Lookup API via Varlink[3]. If --with-varlink=no is used any attempts to resolve or enumerate users/groups provided only via Varlink are suppressed. If --with-varlink=yes is specified such users/groups are included in the output (which is the default).

Added in version 249.

Controls whether to include user/group lookups in the output that are defined using drop-in files in /etc/userdb/, /run/userdb/, /run/host/userdb/, /usr/lib/userdb/. If --with-dropin=no is used these records are suppressed. If --with-dropin=yes is specified such users/groups are included in the output (which is the default).

Added in version 249.

Controls whether to synthesize records for the root and nobody users/groups if they aren't defined otherwise. By default (or "yes") such records are implicitly synthesized if otherwise missing since they have special significance to the OS. When "no" this synthesizing is turned off.

Added in version 245.

This option is short for --with-nss=no --synthesize=no. Use this option to show only records that are natively defined as JSON user or group records, with all NSS/glibc compatibility and all implicit synthesis turned off.

Added in version 245.

Controls whether to do lookups via the multiplexer service (if specified as true, the default) or do lookups in the client (if specified as false). Using the multiplexer service is typically preferable, since it runs in a locked down sandbox.

Added in version 250.

When used with the ssh-authorized-keys command, this will allow passing an additional command line after the user name that is chain executed after the lookup completed. This allows chaining multiple tools that show SSH authorized keys.

Added in version 250.

When used with the user or group command, do a fuzzy string search. Any specified arguments will be matched against the user name, the real name of the user record, the email address, and other descriptive strings of the user or group record. Moreover, instead of precise matching, a substring match or a match allowing slight deviations in spelling is applied.

Added in version 257.

When used with the user or group command, filters by disposition of the record. Takes one of "intrinsic", "system", "regular", "dynamic", "container". May be used multiple times, in which case only users matching any of the specified dispositions are shown.

Added in version 257.

Shortcuts for --disposition=intrinsic, --disposition=system, --disposition=regular, respectively.

Added in version 257.

When used with the user or group command, filters the output by UID/GID ranges. Takes numeric minimum resp. maximum UID/GID values. Shows only records within the specified range. When applied to the user command matches against UIDs, when applied to the group command against GIDs (despite the name of the switch). If unspecified defaults to 0 (for the minimum) and 4294967294 (for the maximum), i.e. by default no filtering is applied as the whole UID/GID range is covered.

Added in version 257.

When used with the user or group command, controls whether to show relevant UID/GID range boundary information in the tabular output. Takes a boolean. Defaults to true.

Added in version 257.

Shortcut for --boundaries=no.

Added in version 257.

Do not pipe output into a pager.

Do not print the legend, i.e. column headers and the footer with hints.

Print a short help text and exit.

Print a short version string and exit.

List all known users records or show details of one or more specified user records. Use --output= to tweak output mode.

Added in version 245.

List all known group records or show details of one or more specified group records. Use --output= to tweak output mode.

Added in version 245.

List users that are members of the specified groups. If no groups are specified list all user/group memberships defined. Use --output= to tweak output mode.

Added in version 245.

List groups that the specified users are members of. If no users are specified list all user/group memberships defined (in this case groups-of-user and users-in-group are equivalent). Use --output= to tweak output mode.

Added in version 245.

List all services currently providing user/group definitions to the system. See below for a list of well-known services providing user information.

Added in version 245.

Show SSH authorized keys for this account. This command is intended to be used to allow the SSH daemon to pick up authorized keys from user records, see below.

Added in version 245.

This service is provided by the system service manager itself (i.e. PID 1) and makes all users (and their groups) synthesized through the DynamicUser= setting in service unit files available to the system (see systemd.exec(5) for details about this setting).

Added in version 245.

This service is provided by systemd-homed.service(8) and makes all users (and their groups) belonging to home directories managed by that service available to the system.

Added in version 245.

This service is provided by systemd-machined.service(8) and synthesizes records for all users/groups used by a container that employs user namespacing.

Added in version 246.

This service is provided by systemd-userdbd.service(8) and multiplexes user/group look-ups to all other running lookup services. This is the primary entry point for user/group record clients, as it simplifies client side implementation substantially since they can ask a single service for lookups instead of asking all running services in parallel. userdbctl uses this service preferably, too, unless --with-nss= or --service= are used, in which case finer control over the services to talk to is required.

Added in version 245.

This service is (also) provided by systemd-userdbd.service(8) and converts classic NSS/glibc user and group records to JSON user/group records, providing full backwards compatibility. Use --with-nss=no to disable this compatibility, see above. Note that compatibility is actually provided in both directions: nss-systemd(8) will automatically synthesize classic NSS/glibc user/group records from all JSON user/group records provided to the system, thus using both APIs is mostly equivalent and provides access to the same data, however the NSS/glibc APIs necessarily expose a more reduced set of fields only.

Added in version 245.

This service is (also) provided by systemd-userdbd.service(8) and picks up JSON user/group records from /etc/userdb/, /run/userdb/, /run/host/userdb/, /usr/lib/userdb/.

Added in version 249.

...
AuthorizedKeysCommand /usr/bin/userdbctl ssh-authorized-keys %u
AuthorizedKeysCommandUser root
...

...
AuthorizedKeysCommand /usr/bin/userdbctl ssh-authorized-keys %u --chain /usr/bin/othertool %u
AuthorizedKeysCommandUser root
...

The maximum log level of emitted messages (messages with a higher log level, i.e. less important ones, will be suppressed). Takes a comma-separated list of values. A value may be either one of (in order of decreasing importance) emerg, alert, crit, err, warning, notice, info, debug, or an integer in the range 0...7. See syslog(3) for more information. Each value may optionally be prefixed with one of console, syslog, kmsg or journal followed by a colon to set the maximum log level for that specific log target (e.g. SYSTEMD_LOG_LEVEL=debug,console:info specifies to log at debug level except when logging to the console which should be at info level). Note that the global maximum log level takes priority over any per target maximum log levels.

A boolean. If true, messages written to the tty will be colored according to priority.

This setting is only useful when messages are written directly to the terminal, because journalctl(1) and other tools that display logs will color messages based on the log level on their own.

A boolean. If true, console log messages will be prefixed with a timestamp.

This setting is only useful when messages are written directly to the terminal or a file, because journalctl(1) and other tools that display logs will attach timestamps based on the entry metadata on their own.

A boolean. If true, messages will be prefixed with a filename and line number in the source code where the message originates.

Note that the log location is often attached as metadata to journal entries anyway. Including it directly in the message text can nevertheless be convenient when debugging programs.

A boolean. If true, messages will be prefixed with the current numerical thread ID (TID).

Note that the this information is attached as metadata to journal entries anyway. Including it directly in the message text can nevertheless be convenient when debugging programs.

The destination for log messages. One of console (log to the attached tty), console-prefixed (log to the attached tty but with prefixes encoding the log level and "facility", see syslog(3), kmsg (log to the kernel circular log buffer), journal (log to the journal), journal-or-kmsg (log to the journal if available, and to kmsg otherwise), auto (determine the appropriate log target automatically, the default), null (disable log output).

Whether to ratelimit kmsg or not. Takes a boolean. Defaults to "true". If disabled, systemd will not ratelimit messages written to kmsg.

Pager to use when --no-pager is not given; overrides $PAGER. If neither $SYSTEMD_PAGER nor $PAGER are set, a set of well-known pager implementations are tried in turn, including less(1) and more(1), until one is found. If no pager implementation is discovered no pager is invoked. Setting this environment variable to an empty string or the value "cat" is equivalent to passing --no-pager.

Note: if $SYSTEMD_PAGERSECURE is not set, $SYSTEMD_PAGER (as well as $PAGER) will be silently ignored.

Override the options passed to less (by default "FRSXMK").

Users might want to change two options in particular:

K

X

Note that setting the regular $LESS environment variable has no effect for less invocations by systemd tools.

See less(1) for more discussion.

Override the charset passed to less (by default "utf-8", if the invoking terminal is determined to be UTF-8 compatible).

Note that setting the regular $LESSCHARSET environment variable has no effect for less invocations by systemd tools.

Takes a boolean argument. When true, the "secure" mode of the pager is enabled; if false, disabled. If $SYSTEMD_PAGERSECURE is not set at all, secure mode is enabled if the effective UID is not the same as the owner of the login session, see geteuid(2) and sd_pid_get_owner_uid(3). In secure mode, LESSSECURE=1 will be set when invoking the pager, and the pager shall disable commands that open or create new files or start new subprocesses. When $SYSTEMD_PAGERSECURE is not set at all, pagers which are not known to implement secure mode will not be used. (Currently only less(1) implements secure mode.)

Note: when commands are invoked with elevated privileges, for example under sudo(8) or pkexec(1), care must be taken to ensure that unintended interactive features are not enabled. "Secure" mode for the pager may be enabled automatically as describe above. Setting SYSTEMD_PAGERSECURE=0 or not removing it from the inherited environment allows the user to invoke arbitrary commands. Note that if the $SYSTEMD_PAGER or $PAGER variables are to be honoured, $SYSTEMD_PAGERSECURE must be set too. It might be reasonable to completely disable the pager using --no-pager instead.

Takes a boolean argument. When true, systemd and related utilities will use colors in their output, otherwise the output will be monochrome. Additionally, the variable can take one of the following special values: "16", "256" to restrict the use of colors to the base 16 or 256 ANSI colors, respectively. This can be specified to override the automatic decision based on $TERM and what the console is connected to.

The value must be a boolean. Controls whether clickable links should be generated in the output for terminal emulators supporting this. This can be specified to override the decision that systemd makes based on $TERM and other conditions.