YADIFAD-CONF(5)

YADIFA

YADIFAD-CONF(5)

NAME¶

yadifad.conf - configuration file for yadifad(8).

SYNOPSIS¶

${SYSCONFDIR}/yadifa/yadifad.conf

DESCRIPTION¶

The configuration of yadifad is consistent in a text file that can optionally include others. The general structure is a sequence of containers: a sequence of lines of text starting with a <container-name> and ending with a </container-name>. Each line between these delimitters is in the form: variable-name value. The format of the value is determined by the type of the variable.

TYPES¶

There are 15 types:

ACL: A list of ACL descriptors. User-defined ACLs are found in the ACL section. The "any" and "none" descriptors are always defined. Elements of the list are separated by a "," or a ";".
DNSSECTYPE: A DNSSEC type name. It can be a DNSSEC-enabled value ("nsec", "nsec3" or "nsec3-optout") or a DNSSEC-disabled value ("none", "no", "off" or "0").
ENUM: A word from a specified set.
FLAG: A boolean value. It can be true ("1", "enable", "enabled", "on", "true", "yes") or false ("0", "disable", "disabled", "off", "false", "no").
FQDN: A fully-qualified domain name text string. e.g.: www.eurid.eu.
GID: Group ID. (Can be a number or a name)
HOST(S): A (list of) host(s). A host is defined by an IP (v4 or v6) and can be followed by the word `port' and a port number. Elements of the list are separated by a `,' or a `;'.
INTEGER / INT: A base-ten integer.
NETMOD: A word or integer that identifies the network model:
single or 0 Each working thread reads a single message, processes its answer and replies to it.
buffered or 1 Working threads are working by couple. One reads a single message and queues it, one de-queues it, processes its answer and replies to it.
multi or 2 Each working thread reads a multiple messages, processes their answers and replies to them.
PATH / FILE: A file or directory path. i.e.: "/var/zones".
STRING / STR: A text string. Double quotes can be used but are not mandatory. Without quotes the string will be taken from the first non-blank character to the last non-blank character.
HEXSTR: A hexadecimal even-length text string.
RELDATE: A cron-like date to be matched, relative to another. The columns are minutes [0;59], hours [0;23], days [0;31], months [1;12], weekdays [mon,tue,wed,thu,fri,sat,sun] and week-of-the-month [0;4]. Multiple values can be set in a column cell using ',' as a separator. The '*' character can be used to set all possible values of its column cell.
RELTIME: A time offset relative to another. It's written as +integer[unit-character] (e.g.: +24h) where the unit character can be seconds, minutes, hours, days or weeks.
SECONDS: A base-ten integer.
HOURS: A base-ten integer.
DAYS: A base-ten integer.
UID: User ID. (Can be a number or a name)

CONTAINERS¶

The configuration of yadifad has several containers:

<main>: General container
<key>: TSIG keys
<acl>: Access lists
<nsid>: NameServer IDentifier
<rrl>: Response Rate Limiting directives
<zone>: Description of the domain name in specific attributes.
<channels>: Description of the logger outputs.
<dnssec-policy>: Description of dnssec policies.
<key-suite>: Description of the key-suites needed if 'dnssec policies' are used.
<key-roll>: Description of the key-rolls needed if 'dnssec policies' are used.
<key-template>: Description of the key-templates needed if 'dnssec policies' are used.
<denial>: Description of 'denial', this can be used in certain 'dnssec policies'.

The configuration supports included files.
example: include /etc/yadifa/conf.d/local.conf

The configuration files can be nested.

The configuration consists of:

*: Container, which starts with <container name> and ends with </container name>
*: Variable name
*: 1 or 2 arguments
*: Arguments can contain 1 or more comma separated values.

STANDARD SECTIONS¶

<main>: General container, contains all the configuration parameters needed to start up yadifad.

allow-control ACL: default: none
Default server-control access control list. Only the sources matching the ACL are accepted.
allow-notify ACL: default: any
Default notify access control list. Only the servers matching the ACL will be handled.
allow-query ACL: default: any
Default query access control list. Only the clients matching the ACL will be replied to.
allow-transfer ACL: default: none
Default transfer access control list. Only the clients matching the ACL will be allowed to transfer a zone (axfr/ixfr).
allow-update ACL: default: none
Default update access control list. Only the clients matching the ACL will be allowed to update a zone.
allow-update-forwarding ACL: default: none
Default update-forwarding access control list. Only the sources matching the ACL are accepted.
answer-formerr-packets FLAG: default: true
If this flag is disabled; the server will not reply to badly formatted packets.
axfr-compress-packets FLAG: default: true
Enables the dns packet compression of each axfr packet.
axfr-max-packet-size INT: default: 4096 bytes
The maximum size of an axfr packet. (MIN: 512; MAX: 65535)
axfr-max-record-by-packet INT: default: 0
The maximum number of records in each axfr packet. Older name servers can only handle 1. Set to 0 to disable the limit. (MIN: 0; MAX: 65535)
axfr-retry-delay SECONDS: default: 600
Number of seconds between each retry for the first transfer from the primary name server. (MIN: 60; MAX: 86400)
axfr-retry-jitter SECONDS: default: 180
Jitter applied to axfr-retry-delay. (MIN: 60; MAX: axfr-retry-delay)
axfr-retry-failure-delay-multiplier INT: default: 5
Linear back-off multiplier. The multiplier times the number of failures is added to the xfr-retry-delay. (MIN: 0; MAX: 86400)
axfr-retry-failure-delay-max SECONDS: default: 3600
Maximum delay added for the back-off. (MIN: 0; MAX: 604800)
axfr-strict-authority FLAG: default: yes (unless --enable-non-aa-axfr-support was used)
Tells yadifad to be strict with the AA flag in AXFR answers
chroot FLAG: default: off
Enabling this flag will make the server jail itself in the chroot-path directory.
chroot-path; chrootpath PATH: default: /
The directory used for the jail.
cpu-count-override INT: default: 0
Overrides the detected number of logical cpus. Set to 0 for automatic. (MIN: 0; MAX: 256)
daemon; daemonize FLAG: default: false
Enabling this flag will make the server detach from the console and work in background.
data-path; datapath PATH: default: zones
The base path were lies the data (zone file path; journaling data; temporary files; etc.)
do-not-listen HOSTS: default: -
An exclusion list of addresses to never listen to. If set, 0.0.0.0 and ::0 will always be split by interface to isolate the address.
edns0-max-size INT: default: 4096
edns0 packets size. (MIN: 512; MAX: 65535)
gid; group GID: default: 0 (or root)
The group ID that the server will use.
hidden-primary; hidden-master FLAG: default: no
As a hidden primary more CPU will be used for various maintenance tasks.
hostname-chaos; hostname STR: default: the host name
The string returned by a hostname-chaos TXT CH query.
keys-path; keyspath PATH: default: zones/keys
The base path of the dnssec keys.
listen HOSTS: default: 0.0.0.0,::0
The list of interfaces to listen to.
log-files-disabled FLAG: default: no
If set, disables checking the log-path directory for existence and writing rights.
log-path; logpath PATH: default: log
The base path where the log files are written.
log-unprocessable FLAG: default: off
Enabling this flag will make the server log unprocessable queries.
max-tcp-queries; max-tcp-connections INT: default: 16
The maximum number of parallel tcp queries; allowed. (MIN: 1; MAX: 255)
network-model NETMOD: default: multi
Sets the networking model of yadifa.
pid-file; pidfile STR: default: run/yadifad.pid
The pid file name.
queries-log-type INT: default: 1
Query log format. (0: none; 1: yadifa format; 2: BIND format; 3: yadifa and BIND format at once)
serverid-chaos; serverid STR: default: -
The string returned by a id.server. TXT CH query. If not set; REFUSED is answered.
server-port; port INT: default: 53
The default dns port. (MIN: 1; MAX: 65535)
sig-validity-interval DAYS: default: 30
The number of days for which an automatic signature is valid. (MIN: 7 days; MAX: 30 days)
sig-validity-jitter; sig-jitter SECONDS: default: 3600
The signature expiration validity jitter in seconds (1 hour). (MIN: 0 sec; MAX: 86400 sec)
sig-validity-regeneration HOURS: default: automatic
Signatures expiring in less than the indicated amount of hours will be recomputed. The default will be chosen by yadifa. (MIN: 24 hours; MAX: 168 hours)
statistics FLAG: default: true
The server will log a report line about some internal statistics.
statistics-max-period SECONDS: default: 60
The period in seconds between two statistics log lines. (MIN: 1 sec; MAX: 31 * 86400 seconds (31 days))
tcp-query-min-rate INT: default: 512 bytes/second
The minimum transfer rate required in a tcp connection (read and write). Slower connections are closed. The units are bytes per second. (MIN: 0; MAX: 4294967295
thread-affinity-base INT: default: 0
Sets the first CPU to set affinity for. Set it to the real CPU of a core. (MIN: 0; MAX: 3)
thread-affinity-multiplier INT: default: 0
Sets the multiplier choosing CPU to set affinity for. Allows avoiding hyperthread cores. Set to 0 for automatic avoiding. (MIN: 0; MAX: 4)
thread-count-by-address INT: default: -1
Number of independent threads used to process each listening address. Set to -1 for automatic. Set to 0 for single threaded. (MIN: -1; MAX: number of CPU's)
uid; user UID: default: 0 (or root)
The user ID that the server will use.
version-chaos; version STR: default: yadifa version#
The text to include in the version TXT CH query.
xfr-connect-timeout SECONDS: default: 5
Timeout for establishing a connection for axfr and ixfr transfers. Set to 0 to disable. (MIN: 0; MAX: 4294967295)
xfr-path; xfrpath PATH: default: zones/xfr
The base path used for axfr and journal storage.
zone-download-thread-count INT: default: 4
Number of independent threads used to download the zones. (MIN: 0; MAX: 255)
zone-load-thread-count INT: default: 1
Number of independent threads used to process loading of the zones. (MIN: 0; MAX: 255)
zone-store-thread-count INT: default: 1
Sets the number of threads used to store a zone on disk (MIN: 1, MAX: 4).
zone-unload-thread-count INT: default: 1
Sets the number of threads used to delete a zone from memory (MIN: 1, MAX: 4).
worker-backlog-queue-size INT: default: 16384
For network-model 1, sets the size of the backlog queue (MIN: 4096, MAX: 1048576).

<key>: TSIG keys

algorithm ENUM

default: -

Mandatory. Sets the algorithm of the key.

Supported values are:

hmac-md5
hmac-sha1
hmac-sha224
hmac-sha256
hmac-sha384
hmac-sha512

(the algorithm names are case insensitive)}

name FQDN: default: -
Mandatory. Sets the name of the key.
secret TEXT: default: -
Mandatory. Sets the value of the key. BASE64 encoded.

<acl>: Access lists

Each entry of the acl section defines a rule of access. Each rule is a name (a single user-defined word) followed by a rule in the form of a list of statements. The separator can be "," or ";". The "any" and "none" names are reserved. A statement tells if a source is accepted or rejected. Reject statements are prefixed with "!". Statements are evaluated in the following order: first from more specific to less specific, then from reject to accept. If a statement matches, the evaluation will stop and accordingly accept or reject the source. If no statement matches, then the source is rejected.

A statement can be either:

*: An IPv4 or an IPv6 address followed (or not) by a mask.
[!]ipv4 |ipv6 [/mask]

For example:

*: internal-network 192.0.2.128/26;2001:DB8::/32

*: The word `key' followed by the name of a TSIG key.
key key-name

For example:

*: slaves key public-slave;key hidden-slave

*: An ACL statement name from the acl section. Note that negation and recursion are forbidden and duly rejected.
acl-name

For example:

*: who-can-ask-for-an-ixfr primary;secondaries;127.0.0.1

<nsid>: NameServer IDentifier

ascii STR: default: ""
The string can be 512 characters long.
hex: default: ""

<rrl>: Response Rate Limiting directives

responses-per-second INT: default: 5
Allowed response rate.
errors-per-second INT: default: 5
Allowed error rate.
slip INT: default: 2
Random slip parameter.
log-only FLAG: default: false
If set to true, logs what it should do without doing it.
ipv4-prefix-length INT: default: 24
Mask applied to group the IPv4 clients.
ipv6-prefix-length INT: default: 56
Mask applied to group the IPv6 clients.
exempt-clients ACL: default: none
Clients matching this rule are not subject to the RRL.
enabled FLAG: default: false
Enables the RRL
min-table-size INT: default: 1024
RRL buffer minimum size
max-table-size INT: default: 16384
RRL buffer maximum size
window INT: default: 15
RRL sliding window size in seconds

<zone>: Description of the domain name in specific attributes.

allow-control ACL: default: as main
Control commands control list. Only the matching sources are allowed.
allow-notify ACL: default: as main
Notify access control list. Only the servers matching the ACL will be handled.
allow-query ACL: default: as main
Query access control list. Only the clients matching the ACL will be replied to.
allow-transfer ACL: default: as main
Tansfer access control list. Only the clients matching the ACL will be allowed to transfer a zone (axfr/ixfr
allow-update ACL: default: as main
Update access control list. Only the clients matching the ACL will be allowed to update a zone.
allow-update-forwarding ACL: default: as main
Update forwarding control list. Only the matching sources are allowed.
dnssec-mode; dnssec DNSSEC-TYPE: default: off
Type of dnssec used for the zone. As primary name sever; yadifa will try to maintain that state.
dnssec-policy STR: default: -
Sets the dnssec-policy id to be used.
domain FQDN: default: -
Mandatory. Sets the domain of the zone (i.e.: eurid.eu).
drop-before-load FLAG: default: off
Enabling this flag will make the server drop the zone before loading the updated zone from disk. Use this on systems constrained for RAM.
file-name; file FILE: default: -
Sets the zone file name. Only mandatory for a primary zone.
journal-size-kb INT: default: 0
Puts a soft limit on the size of the journal; expressed in KB. (MIN: 0; MAX: 3698688 (3GB))
keys-path; keyspath PATH: default: as main
The base path of the dnssec keys.
maintain-dnssec FLAG: default: true
Enabling this flag will cause the server to try and maintain rrsig records
primaries; primary; masters; master HOSTS: default: -
Mandatory for a slave. Sets the primary server(s). Multiple primaries are supported.
multiprimary-retries; multimaster-retries INT: default: 0
The number of times the primary is unreachable before switching to a different primary (MIN: 0; MAX: 255)
no-primary-updates; no-master-updates FLAG: default: false
Enabling this flag will prevent the server from probing or downloading changes from the primary
notifies; also-notify; notify HOSTS: default: -
The list of servers to notify in the event of a change. Currently only used by primaries when a dynamic update occurs.
notify-auto FLAG: default: true
Enabling this flag will cause notify messages to be sent to all name servers in the APEX. Disabling this flags causes the content of APEX to be ignored (ns Records).
notify-retry-count INT: default: 5
Number of times yadifa tries to send a notify. (MIN: 0; MAX: 10)
notify-retry-period INT: default: 1
Time period in minutes between two notify attempts. (MIN: 1; MAX: 600)
notify-retry-period-increase INT: default: 0
Increase of the time period in minutes between two notify attempts. (MIN: 0; MAX: 600)
rrsig-nsupdate-allowed FLAG: default: false
If this flag is set the server allows one to edit RRSIG records using dynamic updates.
sig-validity-interval DAYS: default: as main
The number of days for which an automatic signature is valid. (MIN: 7 days; MAX: 30 days)
sig-validity-regeneration HOURS: default: as main
The signatures expiring in less than the indicated amount of hours will be recomputed. (MIN: 24 hours; MAX: 168 hours)
sig-validity-jitter SECONDS: default: as main
The signature expiration validity jitter in seconds. (MIN: 0 sec; MAX: 86400 sec)
true-multiprimary; true-multimaster FLAG: default: off
Enabling this flag will make the server use axfr when switching to a new primary
type ENUM: default: -
Mandatory. Sets the type of zone : either primary/master or secondary/slave.

<channels>: Description of the logger outputs.

It contains a list descriptions of user-defined outputs for the logger. Depending on the kind of output, the format is different.

The "name" is arbitrary and is used for identification in the <loggers>.
The "stream-name" defines the output type (ie: a file name, a program output or syslog).
The "arguments" are specific to the output type (ie: unix file access rights or syslog options and facilities).

*: file output stream channel-name file-name access-rights (octal).
*: pipe to a program channel-name "| shell command" channel-name "| path-to-program program arguments >> append-redirect"
*: STDOUT, STDERR output stream channel-name stdout channel-name stderr
*: syslog channel-name syslog syslog-facility

<loggers>: Description of the logger outputs sources.

Sets the output of a pre-defined logger from yadifad.

The format of the line is: logger-name output-filter comma-separated-channel-names

Filters are:
DEBUG7, DEBUG6, DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1, DEBUG, INFO, NOTICE, WARNING, ERR, CRIT, ALERT, EMERG

Additionally, there are:

*: ALL (or '*') meaning all the filters.
*: PROD means all but the DEBUG filters.

The defined loggers are:

system: contains low level messages about the system such as memory allocation, threading, IOs, timers and cryptography, ...
database: It contains messages about most lower-level operations in the DNS database. ie: journal, updates, zone loading and sanitization, DNS message query resolution, ...)
dnssec: contains messages about lower-level dnssec operations in the DNS database. ie: status, maintenance, verification, ...
server: contains messages about operations in the DNS server. ie: start up, shutdown, configuration, transfers, various services status (database management, network management, DNS notification management, dynamic update management, resource rate limiting, ...)
zone: contains messages about the loading of a zone from a source (file parsing, transferred binary zone reading, ...)
stats: contains the statistics of the server.
queries: contains the queries on the server. Queries can be logged with the BIND and/or with the YADIFA format.
BIND format:
client sender-ip#port: query: fqdn class type +SETDC (listen-ip)
YADIFA format:
query [ id ] {+SETDC} fqdn class type (sender-ip#port)
where:

id: is the query message id
+: means the message has the Recursion Desired flag set
S: means the message is signed with a TSIG
E: means the message is EDNS
T: means the message was sent using TCP instead of UDP
D: means the message has the DNSSEC OK flag set
C: means the message has the Checking Disabled flag set
fqdn: is the queried FQDN
class: is the queried class
type: is the queried type
sender-ip: is the IP of the client that sent the query
port: is the port of the client that sent the query
listen-ip: is the listen network interface that received the message

Note that on YADIFA any unset flag is replaced by a '-', on BIND only the '+' follows that rule.

System operators will mostly be interested in the info and above messages of queries and stats, as well as the error and above messages of the other loggers.

DNSSEC-POLICY¶

There are 5 sections:

<dnssec-policy>: The dnssec-policy section binds up to four key suites and a denial mode. It is meant to be used as a dnssec-policy parameter in a zone section. Usually two key-suite will be given: one for a KSK and one for a ZSK. The denial mode can be either 'nsec' either the name of a denial section.

id STR: default: -
id of the dnssec-policy section.
description STR: default: -
Description for the dnssec-policy section.
key-suite STR: default: -
id of the key-suite to be used. Usually both a KSK and a ZSK suites are given.
denial STR: default: nsec
id of the denial to be used for nsec3 or the argument 'nsec' to use nsec.

<key-suite>: The key-suite section is used by dnssec policies and is meant to be referenced by a dnssec-policy section. A key-suite links a key definition (key-template) with a deployment calendar (key-roll).

id STR: default: -
id of the key-suite section.
key-template STR: default: -
id of the key-template to be used.
key-roll STR: default: -
id of the key-roll to be used.

<key-roll>: The key-roll section is used by dnssec policies and is meant to be referenced by a key-suite section. It's essentially a deployment calendar. Each event is computed relatively to another. Dates are chosen so that there is always a key in an active state. Please look at the examples as a misconfiguration could easily span the life of a key over several years. (e.g.: by too restrictive on the matching conditions) If the RELDATE format is being used, the first valid date matching the line is used. Usage of the RELDATE format is recommended over the RELTIME one.

id RELDATE|RELTIME: default: -
id of the key-roll section.
generate RELDATE|RELTIME: default: -
Time when the key must be generated. Pre-dated before so it's active right now if it's the first one. Always computed so that the next activation happens before the last deactivation.
publish RELDATE|RELTIME: default: -
Time when the key must be published in the zone. Relative to the generation.
activate RELDATE|RELTIME: default: -
Time when the key will be used for signing the zone or apex of the zone. Relative to the publication.
inactive RELDATE|RELTIME: default: -
Time when the key will not be used anymore for signing. Relative to the activation.
delete RELDATE|RELTIME: default: -
Time when the key will be removed out of the zone. Relative to the deactivation.

<key-template>: The key-template section is used by dnssec policies and is meant to be referenced by a key-suite section. It contains the various parameters of a key for its generation.

id STR: default: -
id of the key-template section.
ksk FLAG: default: false
When this flag is enabled a ksk will be generated. When disabled a zsk will be generated.
algorithm ENUM: default: 7
Sets the algorithm of the key. Supported values are: ’DSA’; 3; ’RSASHA1’; 5; ’NSEC3DSA’; 6; ’NSEC3RSASHA1’; 7; ’RSASHA256’; 8; ’RSASHA512’; 10; ’ECDSAP256SHA256’; 13; ’ECDSAP384SHA384’; 14.

size INT: default: 0
The length of the key in bits (incompatible sizes will be rejected). (MIN: 0; MAX: 4096)

<denial>: The denial section is used by dnssec policies and is meant to be referenced by a dnssec-policy section. It is used to define the NSEC3 denial parameters of a dnssec policy. Policies using a NSEC denial don't need to use this section.

id STR: default: -
id of the denial section.
salt HEXSTR: default: empty
A base16 encoded sequence of bytes used as the salt parameter of the NSEC3 chain.
salt-length INT: default: 0
If the salt parameter isn't set, generates a random salt parameter of that length. (MIN: 0; MAX: 255)
iterations INT: default: 1
Iteration parameter of the NSEC3 chain. (MIN: 0; MAX: 65535)
optout FLAG: default: false
Enables opt-out coverage in the NSEC3 chain. When this flag is enabled, delegations which do not have a DS record will not be covered by an NSEC3 record.

EXAMPLES¶

Examples of containers defined for a configuration file.

*: Main

1.: Main section example

<main>


    # Detach from the console (alias: daemonize)


    daemon                  off


    # Jail the application


    chroot                  off


    # The path of the log files (alias: chroot-path)


    chrootpath              "/chroot/yadifad"


    # The path of the log files (alias: log-path)


    logpath                 "/var/log/yadifa"


    # The location of the pid file (alias: pid-file)


    pidfile                 "/var/run/yadifa/yadifad.pid"


    # The path of the zone files (alias: data-path)


    datapath                "/var/lib/yadifa"


    # The path of the DNSSEC keys (alias: keys-path)


    keyspath                "/var/lib/yadifa/keys"


    # The path of the transfer and journaling files (AXFR & IXFR) (alias: xfr-path)


    xfrpath                 "/var/lib/yadifa/xfr"


    # A string returned by a query of hostname. CH TXT 


    # note: if you leave this out, the real hostname will be given back (alias: hostname-chaos)


    hostname                "server-yadifad"


    # An ID returned by a query to id.server. CH TXT (alias: serverid-chaos)


    serverid                "yadifad-01"


    # The version returned by a query to version.yadifa. CH TXT (alias: version-chaos)


    version                 2.5.0


    # Set the maximum UDP packet size.  


    # note: the packetsize cannot be less than 512 or more than 65535.


    #       Typical choice is 4096.


    edns0-max-size          4096


    # The maximum number of parallel TCP queries (max-tcp-connections)


    max-tcp-queries         100


    # The minimum data rate for a TCP query (in bytes per second)


    tcp-query-min-rate      512


    # The user id to use (alias: user)


    uid                     yadifa


    # The group id to use (alias: group)


    gid                     yadifa


    # The DNS port - any DNS query will use that port unless a specific value is used (alias: server-port)


    port                    53


    # The interfaces to listen to.


    listen                  127.0.0.1, 192.0.2.2, 192.0.2.130 port 8053, 2001:db8::2


    # Type of querylog to use


    #   0: none


    #   1: yadifa


    #   2: bind


    #   3: both yadifa and bind


    queries-log-type        1


    # Enable the collection and logging of statistics


    statistics              on


    # Maximum number of seconds between two statistics lines


    statistics-max-period   60


    # Drop queries with erroneous content


    #


    # answer-formerr-packets on


    answer-formerr-packets  off


    # Maximum number of records in an AXFR packet. Set to 1 for compatibility


    # with very old name servers (alias: axfr-max-record-by-packet)


    axfr-maxrecordbypacket  0


    # Global Access Control rules


    #


    # Rules can be defined on network ranges, TSIG signatures, and ACL rules


    # simple queries:


    #


    # allow-query any


    allow-query             !192.0.2.251,any


    # dynamic update of a zone


    #


    # allow-update none


    allow-update            admins


    # dynamic update of a slave (forwarded to the primary)


    #


    # allow-update-forwarding   none


    allow-update-forwarding admins,key abroad-admin-key


    # transfer of a zone (AXFR or IXFR)


    #


    # allow-transfer any


    allow-transfer          transferer


    # notify of a change in the primary


    #


    # allow-notify any


    allow-notify            primary,admins


    # If YADIFA has the controller enabled, allow control only for these


    # clients (none by default)


    allow-control           controller


    # overwrite the amount of CPUs detected by yadifad


    cpu-count-override 3


    # set the number of threads to serve queries


    thread-count-by-address 2
</main>

*: Key
TSIG-key configuration

1.: Admin-key key definition (the name is arbitrary)

<key>


    name        abroad-admin-key


    algorithm   hmac-md5


    secret      WorthlessKeyForExample==
</key>

2.: primary-secondary key definition (the name is arbitrary)

<key>


    name        primary-secondary


    algorithm   hmac-md5


    secret      PrimaryAndSecondaryKey==
</key>

*: ACL
Access Control List definitions

1.: primary-secondary key use

<acl>


    transferer  key primary-secondary


    admins      192.0.2.0/24, 2001:db8::74


    primary     192.0.2.53


    localhost   127.0.0.0/8, ::1


    controller  key controller # the ACL for the controller MUST use a key
</acl>

*: NSID
DNS NameServer IDentifier

1.: Example with ascii

<nsid>


    ascii belgium-brussels-01
</nsid>

2.: Example with hex

<nsid>


    hex 00320201
</nsid>

*: RRL
Response Rate Limiting

1.: Example

<rrl>


    # Number of identical responses per second before responses are being limited


    responses-per-second    5


    # Number of errors per second before responses are being limited


    errors-per-second       5


    # Random slip parameter


    slip                    10


    # If enabled, the rate limits are only logged and not enforced


    log-only                off


    # Mask applied to group the IPv4 clients


    ipv4-prefix-length      24


    # Mask applied to group the IPv6 clients


    ipv6-prefix-length      56


    # Rate limits are not subject to the following clients (aka whitelist)


    exempt-clients          none


    # Enable or disable the rate limit capabilities


    enabled                 yes
</rrl>

*: Zone

1.: Primary domain zone config

<zone>


    # This server is primary for the zone (mandatory)


    type            primary


    # The domain name (mandatory)


    domain          mydomain.eu


    # The zone file, relative to 'datapath'  (mandatory for a primary) (alias: file-name)


    file            primaries/mydomain.eu


    # List of servers also notified of a change (beside the ones in the zone file) (alias: notifies, notify)


    also-notify     192.0.2.84, 192.0.2.149


    # Set the size of the journal file in KB (alias: journal-size-kb)


    journal-size    8192 


    # Allow dynupdate for these ACL entries


    allow-update    admins


    # Allow AXFR/IXFR for these ACL entries


    allow-transfer  transferer


    # Use DNSSEC policies otherwise remove or put in remark line below


    dnssec-policy   1
</zone>

2.: Slave domain zone config

<zone>


    # This server is slave for that zone (mandatory)


    type            slave


    # The domain name (mandatory)


    domain          myotherdomain.eu


    # The address of the primary (mandatory for a slave, forbidden for a primary) (alias: primary)


    primaries       191.0.2.53 port 4053 key primary-secondary


    # The zone file, relative to 'datapath'.


    file            slaves/myotherdomain.eu


    # Accept notifes from these ACL entries


    allow-notify    primary
</zone>

*: DNSSEC-Policy

DNSSEC-Policy needs some extra sections: key-suite, key-roll, key-template (and denial if NSEC3 is configured)

1.: dnssec-policy example with all the needed sections

example with NSEC3

<dnssec-policy>


    id              "1"


    description     "Example of ZSK and KSK"


    denial          "nsec3-with-salt-on"


    key-suite       "zsk-1024"


    key-suite       "ksk-2048"
</dnssec-policy>

example with NSEC

<dnssec-policy>


    id              "2"


    description     "Example of ZSK and KSK"


    denial          nsec


    key-suite       "zsk-1024"


    key-suite       "ksk-2048"
</dnssec-policy>

2.

key-suite

<key-suite>                     


    id              "ksk-2048"


    key-template    "ksk-2048"


    key-roll        "yearly-schedule"
</key-suite>                            
<key-suite>                     


    id              "zsk-1024"


    key-template    "zsk-1024"


    key-roll        "monthly-schedule"
</key-suite>

3.

key-roll

<key-roll>


    id                 "yearly-schedule"


    generate            5          0           15                  6            *                 * # this year   (2018) 15/06 at 00:05


    publish             10         0           15                  6            *                 * #                             00:10


    activate            15         0           16                  6            *                 * #                    16/06 at 00:15


    inactive            15         0           17                  6            *                 * #             (2019) 17/06 at 00:15


    remove              15        11           18                  6            *                 * #             (2019) 18/06 at 11:15
</key-roll>
<key-roll>


    id                 "monthly-schedule"


    generate            5          0           *                   *            tue               0 # 1 tuesday   of the month at 00:05


    publish             10         0           *                   *            tue               0 #                             00:10


    activate            15         0           *                   *            wed               0 # 1 wednesday of the month at 00:15


    inactive            15         0           *                   *            thu               0 # 1 thursday  of the month at 00:15


    remove              15        11           *                   *            fri               0 # 1 friday    of the month at 11:15
</key-roll>

4.

key-template

<key-template>


    id              "ksk-2048"


    ksk             true


    algorithm       8


    size            2048
</key-template>
<key-template>


    id              "zsk-1024"


    ksk             false


    algorithm       8


    size            1024
</key-template>

5.

denial

<denial>                


    id              "nsec3-with-salt-on"


    salt            "ABCD"


    algorithm       1


    iterations      5


    optout          off             
</denial>

<denial>                


    id              "nsec3-with-salt-length-on"


    salt-length     4


    algorithm       1


    iterations      5


    optout          off             
</denial>

*: Channels

Logging output-channel configurations:

It contains a list of user-defined outputs for the logger.

1.: Example: YADIFA running as daemon channel definition.

<channels>
#   name        stream-name     arguments


    database    database.log    0644


    dnssec      dnssec.log      0644


    server      server.log      0644


    statistics  statistics.log  0644


    system      system.log      0644


    queries     queries.log     0644


    zone        zone.log        0644


    all         all.log         0644


    gziplog     "|/usr/bin/gzip \- >> /var/log/yadifa.log.gz"


    syslog      syslog          user
</channels>

2.: Example: YADIFA running in debug mode.
This example shows the "stderr" and "stdout" which can also be used in the first example, but will output to the console.

<channels>
#   name        stream-name     arguments


    syslog      syslog          user


    stderr      STDERR


    stdout      STDOUT
</channels>

*: Loggers

Logging input configurations:

The "bundle" is the name of the section of YADIDA being logged, sources are : database, dnssec, queries, server, stats, system, zone.
The "debuglevel" uses the same names as syslog.
Additionally, "*" or "all" means all the levels; "prod" means all but the debug levels.

The "channels" are a comma-separated list of channels.

1.: Example without syslog

<loggers>
#   bundle          debuglevel                          channels


    database        ALL                                 database,all


    dnssec          warning                             dnssec,all


    server          INFO,WARNING,ERR,CRIT,ALERT,EMERG   server,all


    stats           prod                                statistics


    system          *                                   system,all


    queries         *                                   queries


    zone            *                                   zone,all
</loggers>

2.: Example with syslog

<loggers>
#   bundle          debuglevel                          channels


    database        ALL                                 database,syslog


    dnssec          warning                             dnssec,syslog


    server          INFO,WARNING,ERR,CRIT,ALERT,EMERG   server,syslog


    stats           prod                                statistics, syslog


    system          *                                   system,syslog


    queries         *                                   queries,syslog


    zone            *                                   zone,syslog
</loggers>

NOTES¶

Since unquoted leading whitespace is generally ignored in the yadifad.conf you can indent everything to taste.

CHANGES¶

Please check the file README from the sources.

VERSION¶

Version: 2.6.7 of 2024-07-19.

MAILING LISTS¶

There exists a mailinglist for questions relating to any program in the yadifa package:

*: yadifa-users@mailinglists.yadifa.eu
for submitting questions/answers.
*: http://www.yadifa.eu/mailing-list-users
for subscription requests.

If you would like to stay informed about new versions and official patches send a subscription request to via:

*: http://www.yadifa.eu/mailing-list-announcements

(this is a readonly list).

LICENSE AND COPYRIGHT¶

AUTHORS¶

Gery Van Emelen
Email: Gery.VanEmelen@EURid.eu
Eric Diaz Fernandez
Email: Eric.DiazFernandez@EURid.eu

WWW: http://www.EURid.eu

2024-07-19

YADIFA

Source file:	yadifad.conf.5.en.gz (from yadifa 2.6.7-1)
Source last updated:	2024-09-05T17:57:51Z
Converted to HTML:	2024-10-21T18:48:08Z

NAME¶

SYNOPSIS¶

DESCRIPTION¶

TYPES¶

CONTAINERS¶

STANDARD SECTIONS¶

DNSSEC-POLICY¶

EXAMPLES¶

SEE ALSO¶

NOTES¶

CHANGES¶

VERSION¶

MAILING LISTS¶

LICENSE AND COPYRIGHT¶

AUTHORS¶