Scroll to navigation

STRUCT CFG80211_OPS(9) Actions and configuration STRUCT CFG80211_OPS(9)

NAME

struct_cfg80211_ops - backend description for wireless configuration

SYNOPSIS

struct cfg80211_ops {
  int (* suspend) (struct wiphy *wiphy, struct cfg80211_wowlan *wow);
  int (* resume) (struct wiphy *wiphy);
  void (* set_wakeup) (struct wiphy *wiphy, bool enabled);
  struct wireless_dev * (* add_virtual_intf) (struct wiphy *wiphy,const char *name,enum nl80211_iftype type,u32 *flags,struct vif_params *params);
  int (* del_virtual_intf) (struct wiphy *wiphy,struct wireless_dev *wdev);
  int (* change_virtual_intf) (struct wiphy *wiphy,struct net_device *dev,enum nl80211_iftype type, u32 *flags,struct vif_params *params);
  int (* add_key) (struct wiphy *wiphy, struct net_device *netdev,u8 key_index, bool pairwise, const u8 *mac_addr,struct key_params *params);
  int (* get_key) (struct wiphy *wiphy, struct net_device *netdev,u8 key_index, bool pairwise, const u8 *mac_addr,void *cookie,void (*callback);
  int (* del_key) (struct wiphy *wiphy, struct net_device *netdev,u8 key_index, bool pairwise, const u8 *mac_addr);
  int (* set_default_key) (struct wiphy *wiphy,struct net_device *netdev,u8 key_index, bool unicast, bool multicast);
  int (* set_default_mgmt_key) (struct wiphy *wiphy,struct net_device *netdev,u8 key_index);
  int (* start_ap) (struct wiphy *wiphy, struct net_device *dev,struct cfg80211_ap_settings *settings);
  int (* change_beacon) (struct wiphy *wiphy, struct net_device *dev,struct cfg80211_beacon_data *info);
  int (* stop_ap) (struct wiphy *wiphy, struct net_device *dev);
  int (* add_station) (struct wiphy *wiphy, struct net_device *dev,const u8 *mac,struct station_parameters *params);
  int (* del_station) (struct wiphy *wiphy, struct net_device *dev,const u8 *mac);
  int (* change_station) (struct wiphy *wiphy, struct net_device *dev,const u8 *mac,struct station_parameters *params);
  int (* get_station) (struct wiphy *wiphy, struct net_device *dev,const u8 *mac, struct station_info *sinfo);
  int (* dump_station) (struct wiphy *wiphy, struct net_device *dev,int idx, u8 *mac, struct station_info *sinfo);
  int (* add_mpath) (struct wiphy *wiphy, struct net_device *dev,const u8 *dst, const u8 *next_hop);
  int (* del_mpath) (struct wiphy *wiphy, struct net_device *dev,const u8 *dst);
  int (* change_mpath) (struct wiphy *wiphy, struct net_device *dev,const u8 *dst, const u8 *next_hop);
  int (* get_mpath) (struct wiphy *wiphy, struct net_device *dev,u8 *dst, u8 *next_hop, struct mpath_info *pinfo);
  int (* dump_mpath) (struct wiphy *wiphy, struct net_device *dev,int idx, u8 *dst, u8 *next_hop,struct mpath_info *pinfo);
  int (* get_mesh_config) (struct wiphy *wiphy,struct net_device *dev,struct mesh_config *conf);
  int (* update_mesh_config) (struct wiphy *wiphy,struct net_device *dev, u32 mask,const struct mesh_config *nconf);
  int (* join_mesh) (struct wiphy *wiphy, struct net_device *dev,const struct mesh_config *conf,const struct mesh_setup *setup);
  int (* leave_mesh) (struct wiphy *wiphy, struct net_device *dev);
  int (* change_bss) (struct wiphy *wiphy, struct net_device *dev,struct bss_parameters *params);
  int (* set_txq_params) (struct wiphy *wiphy, struct net_device *dev,struct ieee80211_txq_params *params);
  int (* libertas_set_mesh_channel) (struct wiphy *wiphy,struct net_device *dev,struct ieee80211_channel *chan);
  int (* set_monitor_channel) (struct wiphy *wiphy,struct cfg80211_chan_def *chandef);
  int (* scan) (struct wiphy *wiphy,struct cfg80211_scan_request *request);
  int (* auth) (struct wiphy *wiphy, struct net_device *dev,struct cfg80211_auth_request *req);
  int (* assoc) (struct wiphy *wiphy, struct net_device *dev,struct cfg80211_assoc_request *req);
  int (* deauth) (struct wiphy *wiphy, struct net_device *dev,struct cfg80211_deauth_request *req);
  int (* disassoc) (struct wiphy *wiphy, struct net_device *dev,struct cfg80211_disassoc_request *req);
  int (* connect) (struct wiphy *wiphy, struct net_device *dev,struct cfg80211_connect_params *sme);
  int (* disconnect) (struct wiphy *wiphy, struct net_device *dev,u16 reason_code);
  int (* join_ibss) (struct wiphy *wiphy, struct net_device *dev,struct cfg80211_ibss_params *params);
  int (* leave_ibss) (struct wiphy *wiphy, struct net_device *dev);
  int (* set_mcast_rate) (struct wiphy *wiphy, struct net_device *dev,int rate[IEEE80211_NUM_BANDS]);
  int (* set_wiphy_params) (struct wiphy *wiphy, u32 changed);
  int (* set_tx_power) (struct wiphy *wiphy, struct wireless_dev *wdev,enum nl80211_tx_power_setting type, int mbm);
  int (* get_tx_power) (struct wiphy *wiphy, struct wireless_dev *wdev,int *dbm);
  int (* set_wds_peer) (struct wiphy *wiphy, struct net_device *dev,const u8 *addr);
  void (* rfkill_poll) (struct wiphy *wiphy);
#ifdef CONFIG_NL80211_TESTMODE
  int (* testmode_cmd) (struct wiphy *wiphy, struct wireless_dev *wdev,void *data, int len);
  int (* testmode_dump) (struct wiphy *wiphy, struct sk_buff *skb,struct netlink_callback *cb,void *data, int len);
#endif
  int (* set_bitrate_mask) (struct wiphy *wiphy,struct net_device *dev,const u8 *peer,const struct cfg80211_bitrate_mask *mask);
  int (* dump_survey) (struct wiphy *wiphy, struct net_device *netdev,int idx, struct survey_info *info);
  int (* set_pmksa) (struct wiphy *wiphy, struct net_device *netdev,struct cfg80211_pmksa *pmksa);
  int (* del_pmksa) (struct wiphy *wiphy, struct net_device *netdev,struct cfg80211_pmksa *pmksa);
  int (* flush_pmksa) (struct wiphy *wiphy, struct net_device *netdev);
  int (* remain_on_channel) (struct wiphy *wiphy,struct wireless_dev *wdev,struct ieee80211_channel *chan,unsigned int duration,u64 *cookie);
  int (* cancel_remain_on_channel) (struct wiphy *wiphy,struct wireless_dev *wdev,u64 cookie);
  int (* mgmt_tx) (struct wiphy *wiphy, struct wireless_dev *wdev,struct cfg80211_mgmt_tx_params *params,u64 *cookie);
  int (* mgmt_tx_cancel_wait) (struct wiphy *wiphy,struct wireless_dev *wdev,u64 cookie);
  int (* set_power_mgmt) (struct wiphy *wiphy, struct net_device *dev,bool enabled, int timeout);
  int (* set_cqm_rssi_config) (struct wiphy *wiphy,struct net_device *dev,s32 rssi_thold, u32 rssi_hyst);
  int (* set_cqm_txe_config) (struct wiphy *wiphy,struct net_device *dev,u32 rate, u32 pkts, u32 intvl);
  void (* mgmt_frame_register) (struct wiphy *wiphy,struct wireless_dev *wdev,u16 frame_type, bool reg);
  int (* set_antenna) (struct wiphy *wiphy, u32 tx_ant, u32 rx_ant);
  int (* get_antenna) (struct wiphy *wiphy, u32 *tx_ant, u32 *rx_ant);
  int (* set_ringparam) (struct wiphy *wiphy, u32 tx, u32 rx);
  void (* get_ringparam) (struct wiphy *wiphy,u32 *tx, u32 *tx_max, u32 *rx, u32 *rx_max);
  int (* sched_scan_start) (struct wiphy *wiphy,struct net_device *dev,struct cfg80211_sched_scan_request *request);
  int (* sched_scan_stop) (struct wiphy *wiphy, struct net_device *dev);
  int (* set_rekey_data) (struct wiphy *wiphy, struct net_device *dev,struct cfg80211_gtk_rekey_data *data);
  int (* tdls_mgmt) (struct wiphy *wiphy, struct net_device *dev,const u8 *peer, u8 action_code,  u8 dialog_token,u16 status_code, u32 peer_capability,const u8 *buf, size_t len);
  int (* tdls_oper) (struct wiphy *wiphy, struct net_device *dev,const u8 *peer, enum nl80211_tdls_operation oper);
  int (* probe_client) (struct wiphy *wiphy, struct net_device *dev,const u8 *peer, u64 *cookie);
  int (* set_noack_map) (struct wiphy *wiphy,struct net_device *dev,u16 noack_map);
  int (* get_et_sset_count) (struct wiphy *wiphy,struct net_device *dev, int sset);
  void (* get_et_stats) (struct wiphy *wiphy, struct net_device *dev,struct ethtool_stats *stats, u64 *data);
  void (* get_et_strings) (struct wiphy *wiphy, struct net_device *dev,u32 sset, u8 *data);
  int (* get_channel) (struct wiphy *wiphy,struct wireless_dev *wdev,struct cfg80211_chan_def *chandef);
  int (* start_p2p_device) (struct wiphy *wiphy,struct wireless_dev *wdev);
  void (* stop_p2p_device) (struct wiphy *wiphy,struct wireless_dev *wdev);
  int (* set_mac_acl) (struct wiphy *wiphy, struct net_device *dev,const struct cfg80211_acl_data *params);
  int (* start_radar_detection) (struct wiphy *wiphy,struct net_device *dev,struct cfg80211_chan_def *chandef,u32 cac_time_ms);
  int (* update_ft_ies) (struct wiphy *wiphy, struct net_device *dev,struct cfg80211_update_ft_ies_params *ftie);
  int (* crit_proto_start) (struct wiphy *wiphy,struct wireless_dev *wdev,enum nl80211_crit_proto_id protocol,u16 duration);
  void (* crit_proto_stop) (struct wiphy *wiphy,struct wireless_dev *wdev);
  int (* set_coalesce) (struct wiphy *wiphy,struct cfg80211_coalesce *coalesce);
  int (* channel_switch) (struct wiphy *wiphy,struct net_device *dev,struct cfg80211_csa_settings *params);
  int (* set_qos_map) (struct wiphy *wiphy,struct net_device *dev,struct cfg80211_qos_map *qos_map);
  int (* set_ap_chanwidth) (struct wiphy *wiphy, struct net_device *dev,struct cfg80211_chan_def *chandef);
};

MEMBERS

suspend
wiphy device needs to be suspended. The variable wow will be NULL or contain the enabled Wake-on-Wireless triggers that are configured for the device.
resume
wiphy device needs to be resumed
set_wakeup
Called when WoWLAN is enabled/disabled, use this callback to call device_set_wakeup_enable to enable/disable wakeup from the device.
add_virtual_intf
create a new virtual interface with the given name, must set the struct wireless_dev's iftype. Beware: You must create the new netdev in the wiphy's network namespace! Returns the struct wireless_dev, or an ERR_PTR. For P2P device wdevs, the driver must also set the address member in the wdev.
del_virtual_intf
remove the virtual interface
change_virtual_intf
change type/configuration of virtual interface, keep the struct wireless_dev's iftype updated.
add_key
add a key with the given parameters. mac_addr will be NULL when adding a group key.
get_key
get information about the key with the given parameters. mac_addr will be NULL when requesting information for a group key. All pointers given to the callback function need not be valid after it returns. This function should return an error if it is not possible to retrieve the key, -ENOENT if it doesn't exist.
del_key
remove a key given the mac_addr ( NULL for a group key) and key_index, return -ENOENT if the key doesn't exist.
set_default_key
set the default key on an interface
set_default_mgmt_key
set the default management frame key on an interface
start_ap
Start acting in AP mode defined by the parameters.
change_beacon
Change the beacon parameters for an access point mode interface. This should reject the call when AP mode wasn't started.
stop_ap
Stop being an AP, including stopping beaconing.
add_station
Add a new station.
del_station
Remove a station; mac may be NULL to remove all stations.
change_station
Modify a given station. Note that flags changes are not much validated in cfg80211, in particular the auth/assoc/authorized flags might come to the driver in invalid combinations -- make sure to check them, also against the existing state! Drivers must call cfg80211_check_station_change to validate the information.
get_station
get station information for the station identified by mac
dump_station
dump station callback -- resume dump at index idx
add_mpath
add a fixed mesh path
del_mpath
delete a given mesh path
change_mpath
change a given mesh path
get_mpath
get a mesh path for the given parameters
dump_mpath
dump mesh path callback -- resume dump at index idx
get_mesh_config
Get the current mesh configuration
update_mesh_config
Update mesh parameters on a running mesh. The mask is a bitfield which tells us which parameters to set, and which to leave alone.
join_mesh
join the mesh network with the specified parameters (invoked with the wireless_dev mutex held)
leave_mesh
leave the current mesh network (invoked with the wireless_dev mutex held)
change_bss
Modify parameters for a given BSS.
set_txq_params
Set TX queue parameters
libertas_set_mesh_channel
Only for backward compatibility for libertas, as it doesn't implement join_mesh and needs to set the channel to join the mesh instead.
set_monitor_channel
Set the monitor mode channel for the device. If other interfaces are active this callback should reject the configuration. If no interfaces are active or the device is down, the channel should be stored for when a monitor interface becomes active.
scan
Request to do a scan. If returning zero, the scan request is given the driver, and will be valid until passed to cfg80211_scan_done. For scan results, call cfg80211_inform_bss; you can call this outside the scan/scan_done bracket too.
auth
Request to authenticate with the specified peer (invoked with the wireless_dev mutex held)
assoc
Request to (re)associate with the specified peer (invoked with the wireless_dev mutex held)
deauth
Request to deauthenticate from the specified peer (invoked with the wireless_dev mutex held)
disassoc
Request to disassociate from the specified peer (invoked with the wireless_dev mutex held)
connect
Connect to the ESS with the specified parameters. When connected, call cfg80211_connect_result with status code WLAN_STATUS_SUCCESS. If the connection fails for some reason, call cfg80211_connect_result with the status from the AP. (invoked with the wireless_dev mutex held)
disconnect
Disconnect from the BSS/ESS. (invoked with the wireless_dev mutex held)
join_ibss
Join the specified IBSS (or create if necessary). Once done, call cfg80211_ibss_joined, also call that function when changing BSSID due to a merge. (invoked with the wireless_dev mutex held)
leave_ibss
Leave the IBSS. (invoked with the wireless_dev mutex held)
set_mcast_rate
Set the specified multicast rate (only if vif is in ADHOC or MESH mode)
set_wiphy_params
Notify that wiphy parameters have changed; changed bitfield (see enum wiphy_params_flags) describes which values have changed. The actual parameter values are available in struct wiphy. If returning an error, no value should be changed.
set_tx_power
set the transmit power according to the parameters, the power passed is in mBm, to get dBm use MBM_TO_DBM. The wdev may be NULL if power was set for the wiphy, and will always be NULL unless the driver supports per-vif TX power (as advertised by the nl80211 feature flag.)
get_tx_power
store the current TX power into the dbm variable; return 0 if successful
set_wds_peer
set the WDS peer for a WDS interface
rfkill_poll
polls the hw rfkill line, use cfg80211 reporting functions to adjust rfkill hw state
testmode_cmd
run a test mode command; wdev may be NULL
testmode_dump
Implement a test mode dump. The cb->args[2] and up may be used by the function, but 0 and 1 must not be touched. Additionally, return error codes other than -ENOBUFS and -ENOENT will terminate the dump and return to userspace with an error, so be careful. If any data was passed in from userspace then the data/len arguments will be present and point to the data contained in NL80211_ATTR_TESTDATA.
set_bitrate_mask
set the bitrate mask configuration
dump_survey
get site survey information.
set_pmksa
Cache a PMKID for a BSSID. This is mostly useful for fullmac devices running firmwares capable of generating the (re) association RSN IE. It allows for faster roaming between WPA2 BSSIDs.
del_pmksa
Delete a cached PMKID.
flush_pmksa
Flush all cached PMKIDs.
remain_on_channel
Request the driver to remain awake on the specified channel for the specified duration to complete an off-channel operation (e.g., public action frame exchange). When the driver is ready on the requested channel, it must indicate this with an event notification by calling cfg80211_ready_on_channel.
cancel_remain_on_channel
Cancel an on-going remain-on-channel operation. This allows the operation to be terminated prior to timeout based on the duration value.
mgmt_tx
Transmit a management frame.
mgmt_tx_cancel_wait
Cancel the wait time from transmitting a management frame on another channel
set_power_mgmt
Configure WLAN power management. A timeout value of -1 allows the driver to adjust the dynamic ps timeout value.
set_cqm_rssi_config
Configure connection quality monitor RSSI threshold.
set_cqm_txe_config
Configure connection quality monitor TX error thresholds.
mgmt_frame_register
Notify driver that a management frame type was registered. Note that this callback may not sleep, and cannot run concurrently with itself.
set_antenna
Set antenna configuration (tx_ant, rx_ant) on the device. Parameters are bitmaps of allowed antennas to use for TX/RX. Drivers may reject TX/RX mask combinations they cannot support by returning -EINVAL (also see nl80211.h NL80211_ATTR_WIPHY_ANTENNA_TX).
get_antenna
Get current antenna configuration from device (tx_ant, rx_ant).
set_ringparam
Set tx and rx ring sizes.
get_ringparam
Get tx and rx ring current and maximum sizes.
sched_scan_start
Tell the driver to start a scheduled scan.
sched_scan_stop
Tell the driver to stop an ongoing scheduled scan. This call must stop the scheduled scan and be ready for starting a new one before it returns, i.e. sched_scan_start may be called immediately after that again and should not fail in that case. The driver should not call cfg80211_sched_scan_stopped for a requested stop (when this method returns 0.)
set_rekey_data
give the data necessary for GTK rekeying to the driver
tdls_mgmt
Transmit a TDLS management frame.
tdls_oper
Perform a high-level TDLS operation (e.g. TDLS link setup).
probe_client
probe an associated client, must return a cookie that it later passes to cfg80211_probe_status.
set_noack_map
Set the NoAck Map for the TIDs.
get_et_sset_count
Ethtool API to get string-set count. See ethtool_ops.get_sset_count
get_et_stats
Ethtool API to get a set of u64 stats. See ethtool_ops.get_ethtool_stats
get_et_strings
Ethtool API to get a set of strings to describe stats and perhaps other supported types of ethtool data-sets. See ethtool_ops.get_strings
get_channel
Get the current operating channel for the virtual interface. For monitor interfaces, it should return NULL unless there's a single current monitoring channel.
start_p2p_device
Start the given P2P device.
stop_p2p_device
Stop the given P2P device.
set_mac_acl
Sets MAC address control list in AP and P2P GO mode. Parameters include ACL policy, an array of MAC address of stations and the number of MAC addresses. If there is already a list in driver this new list replaces the existing one. Driver has to clear its ACL when number of MAC addresses entries is passed as 0. Drivers which advertise the support for MAC based ACL have to implement this callback.
start_radar_detection
Start radar detection in the driver.
update_ft_ies
Provide updated Fast BSS Transition information to the driver. If the SME is in the driver/firmware, this information can be used in building Authentication and Reassociation Request frames.
crit_proto_start
Indicates a critical protocol needs more link reliability for a given duration (milliseconds). The protocol is provided so the driver can take the most appropriate actions.
crit_proto_stop
Indicates critical protocol no longer needs increased link reliability. This operation can not fail.
set_coalesce
Set coalesce parameters.
channel_switch
initiate channel-switch procedure (with CSA)
set_qos_map
Set QoS mapping information to the driver
set_ap_chanwidth
Set the AP (including P2P GO) mode channel width for the given interface This is used e.g. for dynamic HT 20/40 MHz channel width changes during the lifetime of the BSS.

DESCRIPTION

This struct is registered by fullmac card drivers and/or wireless stacks in order to handle configuration requests on their interfaces.
All callbacks except where otherwise noted should return 0 on success or a negative error code.
All operations are currently invoked under rtnl for consistency with the wireless extensions but this is subject to reevaluation as soon as this code is used more widely and we have a first user without wext.

AUTHOR

Johannes Berg <johannes@sipsolutions.net>
Author.

COPYRIGHT

February 2017 Kernel Hackers Manual 3.16