NAME¶

Read - Read a Display.

DESCRIPTION¶

Read a Display, Version 1.3.5 Author: Graeme W. Gill, licensed under the AGPL Version 3 Diagnostic: Usage requested usage: dispread [options] outfile

-v

Verbose mode

-d n[,m]

Choose the display n from the following list (default 1) Optionally choose different display m for VideoLUT access

XRandR 1.2 is faulty - falling back to older extensions

1 = 'Hitachi/HINT W240D DVI at 0, 0, width 1920, height 1200' 2 = 'ProView/EMC/PTS at 0, 0, width 1280, height 1024'

-c listno

Set communication port from the following list (default 1)

1 = '/dev/ttyS0' 2 = '/dev/ttyS1' 3 = '/dev/ttyS2' 4 = '/dev/ttyS3'

-p

Use projector mode (if available)

-y c|l

Display type, c = CRT, l = LCD

-k file.cal

Load calibration file into display while reading

-K file.cal

Apply calibration file to test values while reading

-s

Save spectral information (default don't save)

-P ho,vo,ss

Position test window and scale it ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.

-F

Fill whole screen with black background

-n

Don't set override redirect on test window

-J

Run instrument calibration first (used rarely)

-N

Disable auto calibration of instrument

-H

Use high resolution spectrum mode (if available)

-V

Use adaptive measurement mode (if available)

-w

Disable normalisation of white to Y = 100

-X file.ccmx

Apply Colorimeter Correction Matrix

-X file.ccss

Use Colorimeter Calibration Spectral Samples for calibration

-Q observ

Choose CIE Observer for spectrometer or CCSS colorimeter data: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c

-I b|w

Drift compensation, Black: -Ib, White: -Iw, Both: -Ibw

-C "command"

Invoke shell "command" each time a color is set

-M "command"

Invoke shell "command" each time a color is measured

-W n|h|x

Override serial port flow control: n = none, h = HW, x = Xon/Xoff

-D [level]

Print debug diagnostics to stderr

outfile

Base name for input[ti1]/output[ti3] file

Author: Graeme W. Gill, licensed under the AGPL Version 3 Diagnostic: Usage requested usage: dispread [options] outfile

-v

Verbose mode

-d n[,m]

Choose the display n from the following list (default 1) Optionally choose different display m for VideoLUT access

XRandR 1.2 is faulty - falling back to older extensions

1 = 'Hitachi/HINT W240D DVI at 0, 0, width 1920, height 1200' 2 = 'ProView/EMC/PTS at 0, 0, width 1280, height 1024'

-c listno

Set communication port from the following list (default 1)

1 = '/dev/ttyS0' 2 = '/dev/ttyS1' 3 = '/dev/ttyS2' 4 = '/dev/ttyS3'

-p

Use projector mode (if available)

-y c|l

Display type, c = CRT, l = LCD

-k file.cal

Load calibration file into display while reading

-K file.cal

Apply calibration file to test values while reading

-s

Save spectral information (default don't save)

-P ho,vo,ss

Position test window and scale it ho,vi: 0.0 = left/top, 0.5 = center, 1.0 = right/bottom etc. ss: 0.5 = half, 1.0 = normal, 2.0 = double etc.

-F

Fill whole screen with black background

-n

Don't set override redirect on test window

-J

Run instrument calibration first (used rarely)

-N

Disable auto calibration of instrument

-H

Use high resolution spectrum mode (if available)

-V

Use adaptive measurement mode (if available)

-w

Disable normalisation of white to Y = 100

-X file.ccmx

Apply Colorimeter Correction Matrix

-X file.ccss

Use Colorimeter Calibration Spectral Samples for calibration

-Q observ

Choose CIE Observer for spectrometer or CCSS colorimeter data: 1931_2 (def), 1964_10, S&B 1955_2, shaw, J&V 1978_2, 1964_10c

-I b|w

Drift compensation, Black: -Ib, White: -Iw, Both: -Ibw

-C "command"

Invoke shell "command" each time a color is set

-M "command"

Invoke shell "command" each time a color is measured

-W n|h|x

Override serial port flow control: n = none, h = HW, x = Xon/Xoff

-D [level]

Print debug diagnostics to stderr

outfile

Base name for input[ti1]/output[ti3] file