NAME¶

SYNOPSIS¶

DESCRIPTION¶

shell>  drizzle db_name

shell>  drizzle --user=user_name --password=your_password db_name

shell>  drizzle db_name < script.sql > output.tab

DRIZZLE OPTIONS¶

•

--help, -?

 

Display a help message and exit.

•

--auto-rehash

 

Enable automatic rehashing. This option is on by default, which enables database, table, and column name completion. Use --disable-auto-rehash to disable rehashing. That causes drizzle to start faster, but you must issue the rehash command if you want to use name completion.

 

To complete a name, enter the first part and press Tab. If the name is unambiguous, drizzle completes it. Otherwise, you can press Tab again to see the possible names that begin with what you have typed so far. Completion does not occur if there is no default database.

•

--auto-vertical-output

 

Causes result sets to be displayed vertically if they are too wide for the current window, and using normal tabular format otherwise. (This applies to statements terminated by ; or \G.) This option was added in Drizzle 6.0.4.

•

--batch, -B

 

Print results using tab as the column separator, with each row on a new line. With this option, drizzle does not use the history file.

 

Batch mode results in non-tabular output format and escaping of special characters. Escaping may be disabled by using raw mode; see the description for the --raw option.

•

--character-sets-dir=path

 

The directory where character sets are installed. See Section 9.2, “The Character Set Used for Data and Sorting”.

•

--column-names

 

Write column names in results.

•

--column-type-info, -m

 

Display result set metadata.

•

--comments, -c

 

Whether to preserve comments in statements sent to the server. The default is --skip-comments (discard comments), enable with --comments (preserve comments). This option was added in Drizzle 6.0.4.

•

--compress, -C

 

Compress all information sent between the client and the server if both support compression.

•

--database=db_name, -D db_name

 

The database to use. This is useful primarily in an option file.

•

--debug-check

 

Print some debugging information when the program exits.

•

--debug-info, -T

 

Print debugging information and memory and CPU usage statistics when the program exits.

•

--delimiter=str

 

Set the statement delimiter. The default is the semicolon character (“;”).

•

--disable-named-commands

 

Disable named commands. Use the \* form only, or use named commands only at the beginning of a line ending with a semicolon (“;”). drizzle starts with this option enabled by default. However, even with this option, long-format commands still work from the first line. See the section called “ MYSQL COMMANDS”.

•

--execute=statement, -e statement

 

Execute the statement and quit. The default output format is like that produced with --batch. See Section 4.2.3.1, “Using Options on the Command Line”, for some examples.

•

--force, -f

 

Continue even if an SQL error occurs.

•

--host=host_name, -h host_name

 

Connect to the Drizzle server on the given host.

•

--html, -H

 

Produce HTML output.

•

--ignore-spaces, -i

 

Ignore spaces after function names. The effect of this is described in the discussion for the IGNORE_SPACE SQL mode (see Section 5.1.7, “Server SQL Modes”).

•

--line-numbers

 

Write line numbers for errors. Disable this with --skip-line-numbers.

•

--local-infile[={0|1}]

 

Enable or disable LOCAL capability for LOAD DATA INFILE. With no value, the option enables LOCAL. The option may be given as --local-infile=0 or --local-infile=1 to explicitly disable or enable LOCAL. Enabling LOCAL has no effect if the server does not also support it.

•

--named-commands, -G

 

Enable named drizzle commands. Long-format commands are allowed, not just short-format commands. For example, quit and \q both are recognized. Use --skip-named-commands to disable named commands. See the section called “ MYSQL COMMANDS”.

•

--no-auto-rehash, -A

 

Deprecated form of -skip-auto-rehash. Use --disable-auto-rehash instead. See the description for --auto-rehash.

•

--no-beep, -b

 

Do not beep when errors occur.

•

--no-named-commands, -g

 

Deprecated, use --disable-named-commands instead.

•

--no-pager

 

Deprecated form of --skip-pager. See the --pager option.

•

--no-tee

 

Do not copy output to a file. the section called “ MYSQL COMMANDS”, discusses tee files further.

•

--one-database, -o

 

Ignore statements except those for the default database named on the command line. This is useful for skipping updates to other databases in the binary log.

•

--pager[=command]

 

Use the given command for paging query output. If the command is omitted, the default pager is the value of your PAGER environment variable. Valid pagers are less, more, cat [> filename], and so forth. This option works only on Unix. It does not work in batch mode. To disable paging, use --skip-pager. the section called “ MYSQL COMMANDS”, discusses output paging further.

•

--password[=password], -P[ password]

 

The password to use when connecting to the server. If you use the short option form ( -p), you cannot have a space between the option and the password. If you omit the password value following the --password or -p option on the command line, you are prompted for one.

 

Specifying a password on the command line should be considered insecure. See Section 5.5.6.2, “End-User Guidelines for Password Security”.

•

--pipe, -W

 

On Windows, connect to the server via a named pipe. This option applies only for connections to a local server, and only if the server supports named-pipe connections.

•

--port=port_num, -p port_num

 

The TCP/IP port number to use for the connection.

•

--prompt=format_str

 

Set the prompt to the specified format. The default is drizzle>. The special sequences that the prompt can contain are described in the section called “ MYSQL COMMANDS”.

•

--protocol={TCP|SOCKET|PIPE|MEMORY}

 

The connection protocol to use for connecting to the server. It is useful when the other connection parameters normally would cause a protocol to be used other than the one you want. For details on the allowable values, see Section 4.2.2, “Connecting to the Drizzle Server”.

•

--quick, -q

 

Do not cache each query result, print each row as it is received. This may slow down the server if the output is suspended. With this option, drizzle does not use the history file.

•

--raw, -r

 

For tabular output, the “boxing” around columns enables one column value to be distinguished from another. For non-tabular output (such as is produced in batch mode or when the --batch or --silent option is given), special characters are escaped in the output so they can be identified easily. Newline, tab, NUL, and backslash are written as \n, \t, \0, and \\. The --raw option disables this character escaping.

 

The following example demonstrates tabular versus non-tabular output and the use of raw mode to disable escaping:

 

%  drizzle
drizzle> SELECT CHAR(92);
+----------+
| CHAR(92) |
+----------+
| \        | 
+----------+
%  drizzle -s
drizzle> SELECT CHAR(92);
CHAR(92)
\\
%  drizzle -s -r
drizzle> SELECT CHAR(92);
CHAR(92)
\

•

--reconnect

 

If the connection to the server is lost, automatically try to reconnect. A single reconnect attempt is made each time the connection is lost. To suppress reconnection behavior, use --skip-reconnect.

•

--safe-updates, --i-am-a-dummy, -U

 

Allow only those UPDATE and DELETE statements that specify which rows to modify by using key values. If you have set this option in an option file, you can override it by using --safe-updates on the command line. See the section called “ MYSQL TIPS”, for more information about this option.

•

--secure-auth

 

Do not send passwords to the server in old (pre-4.1.1) format. This prevents connections except for servers that use the newer password format.

•

--show-warnings

 

Cause warnings to be shown after each statement if there are any. This option applies to interactive and batch mode.

•

--sigint-ignore

 

Ignore SIGINT signals (typically the result of typing Control-C).

•

--silent, -s

 

Silent mode. Produce less output. This option can be given multiple times to produce less and less output.

 

This option results in non-tabular output format and escaping of special characters. Escaping may be disabled by using raw mode; see the description for the --raw option.

•

--skip-column-names, -N

 

Do not write column names in results. The short format, -N is deprecated, use the long format instead.

•

--skip-line-numbers, -L

 

Do not write line numbers for errors. Useful when you want to compare result files that include error messages. The short format, -L is deprecated, use the long format instead.

•

--socket=path, -S path

 

For connections to localhost, the Unix socket file to use, or, on Windows, the name of the named pipe to use.

•

--ssl*

 

Options that begin with --ssl specify whether to connect to the server via SSL and indicate where to find SSL keys and certificates. See Section 5.5.7.3, “SSL Command Options”.

•

--table, -t

 

Display output in table format. This is the default for interactive use, but can be used to produce table output in batch mode.

•

--tee=file_name

 

Append a copy of output to the given file. This option does not work in batch mode. the section called “ MYSQL COMMANDS”, discusses tee files further.

•

--unbuffered, -n

 

Flush the buffer after each query.

•

--user=user_name, -u user_name

 

The Drizzle user name to use when connecting to the server.

•

--verbose, -v

 

Verbose mode. Produce more output about what the program does. This option can be given multiple times to produce more and more output. (For example, -v -v -v produces table output format even in batch mode.)

•

--version, -V

 

Display version information and exit.

•

--vertical, -E

 

Print query output rows vertically (one line per column value). Without this option, you can specify vertical output for individual statements by terminating them with \G.

•

--wait, -w

 

If the connection cannot be established, wait and retry instead of aborting.

•

connect_timeout

 

The number of seconds before connection timeout. (Default value is 0.)

•

max_allowed_packet

 

The maximum packet length to send to or receive from the server. (Default value is 16MB.)

•

max_join_size

 

The automatic limit for rows in a join when using --safe-updates. (Default value is 1,000,000.)

•

net_buffer_length

 

The buffer size for TCP/IP and socket communication. (Default value is 16KB.)

•

select_limit

 

The automatic limit for SELECT statements when using --safe-updates. (Default value is 1,000.)

 

•

Set the MYSQL_HISTFILE variable to /dev/null. To cause this setting to take effect each time you log in, put the setting in one of your shell's startup files.

•

Create .mysql_history as a symbolic link to /dev/null:

 

shell>  ln -s /dev/null $HOME/.mysql_history

MYSQL COMMANDS¶

mysql>  help
List of all Drizzle commands:
Note that all text commands must be first on line and end with ';'
?         (\?) Synonym for `help'.
clear     (\c) Clear command.
connect   (\r) Reconnect to the server. Optional arguments are db and host.
delimiter (\d) Set statement delimiter.
edit      (\e) Edit command with $EDITOR.
ego       (\G) Send command to mysql server, display result vertically.
exit      (\q) Exit mysql. Same as quit.
go        (\g) Send command to mysql server.
help      (\h) Display this help.
nopager   (\n) Disable pager, print to stdout.
notee     (\t) Don't write into outfile.
pager     (\P) Set PAGER [to_pager]. Print the query results via PAGER.
print     (\p) Print current command.
prompt    (\R) Change your mysql prompt.
quit      (\q) Quit mysql.
rehash    (\#) Rebuild completion hash.
source    (\.) Execute an SQL script file. Takes a file name as an argument.
status    (\s) Get status information from the server.
system    (\!) Execute a system shell command.
tee       (\T) Set outfile [to_outfile]. Append everything into given
               outfile.
use       (\u) Use another database. Takes database name as argument.
charset   (\C) Switch to another charset. Might be needed for processing
               binlog with multi-byte charsets.
warnings  (\W) Show warnings after every statement.
nowarning (\w) Don't show warnings after every statement.
For server side help, type 'help contents'

•

help [arg], \h [arg], \? [arg], ? [ arg]

 

Displays a help message listing the available mysql commands.

 

If you provide an argument to the help command, mysql uses it as a search string to access server-side help from the contents of the Drizzle Reference Manual. For more information, see the section called “ MYSQL SERVER-SIDE HELP”.

•

charset charset_name, \C charset_name

 

The charset command changes the default character set and issues a SET NAMES statement. This enables the character set to remain synchronized on the client and server if mysql is run with auto-reconnect enabled (which is not recommended), because the specified character set is used for reconnects.

•

clear, \c

 

Clears the current input. Use this if you change your mind about executing the statement that you are entering.

•

connect [db_name host_name ]], \r [db_name host_name]]

 

Reconnects to the server. The optional database name and host name arguments may be given to specify the default database or the host where the server is running. If omitted, the current values are used.

•

delimiter str, \d str

 

The delimiter command changes the string that mysql interprets as the separator between SQL statements. The default is the semicolon character (“;”).

 

The delimiter can be specified as an unquoted or quoted argument. Quoting can be done with either single quote (') or douple quote (") characters. To include a quote within a quoted string, either quote the string with the other quote character or escape the quote with a backslash (“\”) character. Backslash should be avoided outside of quoted strings because it is the escape character for Drizzle. For an unquoted argument, the delmiter is read up to the first space or end of line. For a quoted argument, the delimiter is read up to the matching quote on the line.

 

When the delimiter recognized by mysql is set to something other than the default of “;”, instances of that character are sent to the server without interpretation. However, the server itself still interprets “;” as a statement delimiter and processes statements accordingly. This behavior on the server side comes into play for multiple-statement execution (see Section 20.10.12, “C API Support for Multiple Statement Execution”), and for parsing the body of stored procedures and functions, triggers, and events (see Section 18.1, “Defining Stored Programs”).

•

edit, \e

 

Edits the current input statement. mysql checks the values of the EDITOR and VISUAL environment variables to determine which editor to use. The default editor is vi if neither variable is set.

 

The edit command works only in Unix.

•

ego, \G

 

Sends the current statement to the server to be executed and displays the result using vertical format.

•

exit, \q

 

Exits mysql.

•

go, \g

 

Sends the current statement to the server to be executed.

•

nopager, \n

 

Disables output paging. See the description for pager.

 

The nopager command works only in Unix.

•

notee, \t

 

Disables output copying to the tee file. See the description for tee.

•

nowarning, \w

 

Enables display of warnings after each statement.

•

pager [command], \P [ command]

 

By using the --pager option when you invoke mysql, it is possible to browse or search query results in interactive mode with Unix programs such as less, more, or any other similar program. If you specify no value for the option, mysql checks the value of the PAGER environment variable and sets the pager to that.

 

Output paging can be enabled interactively with the pager command and disabled with nopager. The command takes an optional argument; if given, the paging program is set to that. With no argument, the pager is set to the pager that was set on the command line, or stdout if no pager was specified.

 

Output paging works only in Unix because it uses the popen() function, which does not exist on Windows. For Windows, the tee option can be used instead to save query output, although it is not as convenient as pager for browsing output in some situations.

•

print, \p

 

Prints the current input statement without executing it.

•

prompt [str], \R [ str]

 

Reconfigures the mysql prompt to the given string. The special character sequences that can be used in the prompt are described later in this section.

 

If you specify the prompt command with no argument, mysql resets the prompt to the default of mysql>.

•

quit, \q

 

Exits mysql.

•

rehash, \#

 

Rebuilds the completion hash that enables database, table, and column name completion while you are entering statements. (See the description for the --auto-rehash option.)

•

source file_name, \. file_name

 

Reads the named file and executes the statements contained therein. On Windows, you can specify path name separators as / or \\.

•

status, \s

 

The status command provides some information about the connection and the server you are using. If you are running in --safe-updates mode, status also prints the values for the mysql variables that affect your queries.

•

system command, \! command

 

Executes the given command using your default command interpreter.

 

The system command works only in Unix.

•

tee [file_name], \T [ file_name]

 

By using the --tee option when you invoke mysql, you can log statements and their output. All the data displayed on the screen is appended into a given file. This can be very useful for debugging purposes also. mysql flushes results to the file after each statement, just before it prints its next prompt.

 

You can enable this feature interactively with the tee command. Without a parameter, the previous file is used. The tee file can be disabled with the notee command. Executing tee again re-enables logging.

•

use db_name, \u db_name

 

Uses db_name as the default database.

•

warnings, \W

 

Enables display of warnings after each statement (if there are any).

 

•

You can use it to write to a file and the results go only to the file:

 

mysql>  pager cat > /tmp/log.txt

mysql>  pager less -n -i -S

•

In the preceding example, note the -S option. You may find it very useful for browsing wide query results. Sometimes a very wide result set is difficult to read on the screen. The -S option to less can make the result set much more readable because you can scroll it horizontally using the left-arrow and right-arrow keys. You can also use -S interactively within less to switch the horizontal-browse mode on and off. For more information, read the less manual page:

 

shell>  man less

•

The -F and -X options may be used with less to cause it to exit if output fits on one screen, which is convenient when no scrolling is necessary:

 

mysql>  pager less -n -i -S -F -X

•

You can specify very complex pager commands for handling query output:

 

mysql>  pager cat | tee /dr1/tmp/res.txt \
           | tee /dr2/tmp/res2.txt | less -n -i -S

•

Use an environment variable. You can set the MYSQL_PS1 environment variable to a prompt string. For example:

 

shell>  export MYSQL_PS1="(\u@\h) [\d]> "

•

Use a command-line option. You can set the --prompt option on the command line to mysql. For example:

 

shell>  mysql --prompt="(\u@\h) [\d]> "
(user@host) [database]>

•

Use an option file. You can set the prompt option in the [mysql] group of any Drizzle option file, such as /etc/my.cnf or the .my.cnf file in your home directory. For example:

 

[mysql]
prompt=(\\u@\\h) [\\d]>\\_

[mysql]
prompt="\\r:\\m:\\s> "

•

Set the prompt interactively. You can change your prompt interactively by using the prompt (or \R) command. For example:

 

mysql>  prompt (\u@\h) [\d]>\_
PROMPT set to '(\u@\h) [\d]>\_'
( user@host) [database]>
( user@host) [database]> prompt
Returning to default PROMPT of mysql>
mysql>

MYSQL SERVER-SIDE HELP¶

mysql>  help search_string

mysql>  help me
Nothing found
Please try to run 'help contents' for a list of all accessible topics

mysql>  help contents
You asked for help about help category: "Contents"
For more information, type 'help <item>', where <item> is one of the
following categories:
   Account Management
   Administration
   Data Definition
   Data Manipulation
   Data Types
   Functions
   Functions and Modifiers for Use with GROUP BY
   Geographic Features
   Language Structure
   Plugins
   Storage Engines
   Stored Routines
   Table Maintenance
   Transactions
   Triggers

mysql>  help logs
Many help items for your request exist.
To make a more specific request, please type 'help <item>',
where <item> is one of the following topics:
   SHOW
   SHOW BINARY LOGS
   SHOW ENGINE
   SHOW LOGS

mysql>  help show binary logs
Name: 'SHOW BINARY LOGS'
Description:
Syntax:
SHOW BINARY LOGS
SHOW MASTER LOGS
Lists the binary log files on the server. This statement is used as
part of the procedure described in [purge-binary-logs], that shows how
to determine which logs can be purged.
mysql> SHOW BINARY LOGS;
+---------------+-----------+
| Log_name      | File_size |
+---------------+-----------+
| binlog.000015 |    724935 |
| binlog.000016 |    733481 |
+---------------+-----------+

EXECUTING SQL STATEMENTS FROM A TEXT FILE¶

shell>  mysql db_name

shell>  mysql db_name < text_file

shell>  mysql < text_file

mysql>  source file_name
mysql>  \. file_name

SELECT '<info_to_display>' AS ' ';

MYSQL TIPS¶

Displaying Query Results Vertically¶

mysql>  SELECT * FROM mails WHERE LENGTH(txt) < 300 LIMIT 300,1\G
*************************** 1. row ***************************
  msg_nro: 3068
     date: 2000-03-01 23:29:50
time_zone: +0200
mail_from: Monty
    reply: monty@no.spam.com
  mail_to: "Thimble Smith" <tim@no.spam.com>
      sbj: UTF-8
      txt: >>>>> "Thimble" == Thimble Smith writes:
Thimble> Hi.  I think this is a good idea.  Is anyone familiar
Thimble> with UTF-8 or Unicode? Otherwise, I'll put this on my
Thimble> TODO list and see what happens.
Yes, please do that.
Regards,
Monty
     file: inbox-jani-1
     hash: 190402944
1 row in set (0.09 sec)

Using the --safe-updates Option¶

SET sql_safe_updates=1, sql_select_limit=1000, sql_max_join_size=1000000;

•

You are not allowed to execute an UPDATE or DELETE statement unless you specify a key constraint in the WHERE clause or provide a LIMIT clause (or both). For example:

 

UPDATE  tbl_name SET not_key_column=val WHERE key_column=val;
UPDATE  tbl_name SET not_key_column=val LIMIT 1;

•

The server limits all large SELECT results to 1,000 rows unless the statement includes a LIMIT clause.

•

The server aborts multiple-table SELECT statements that probably need to examine more than 1,000,000 row combinations.

 

shell>  mysql --safe-updates --select_limit=500 --max_join_size=10000

Disabling mysql Auto-Reconnect¶

mysql>  SET @a=1;
Query OK, 0 rows affected (0.05 sec)
mysql>  INSERT INTO t VALUES(@a);
ERROR 2006: Drizzle server has gone away
No connection. Trying to reconnect...
Connection id:    1
Current database: test
Query OK, 1 row affected (1.30 sec)
mysql>  SELECT * FROM t;
+------+
| a    |
+------+
| NULL |
+------+
1 row in set (0.05 sec)

COPYRIGHT¶

REFERENCES¶

1. Bug#25946

http://bugs.mysql.com/25946

SEE ALSO¶

AUTHOR¶