PAM_TALLY2(8)

Linux-PAM Manual

PAM_TALLY2(8)

NAME¶

pam_tally2 - The login counter (tallying) module

SYNOPSIS¶

pam_tally2.so [file= /path/to/counter] [onerr=[fail|succeed]] [magic_root] [even_deny_root] [deny= n] [lock_time=n] [unlock_time= n] [root_unlock_time=n] [serialize] [audit] [silent] [no_log_info]

pam_tally2 [--file /path/to/counter] [--user username] [--reset[= n]] [--quiet]

DESCRIPTION¶

This module maintains a count of attempted accesses, can reset count on success, can deny access if too many attempts fail.

pam_tally2 comes in two parts: pam_tally2.so and pam_tally2. The former is the PAM module and the latter, a stand-alone program. pam_tally2 is an (optional) application which can be used to interrogate and manipulate the counter file. It can display users' counts, set individual counts, or clear all counts. Setting artificially high counts may be useful for blocking users without changing their passwords. For example, one might find it useful to clear all counts every midnight from a cron job.

Normally, failed attempts to access root will not cause the root account to become blocked, to prevent denial-of-service: if your users aren't given shell accounts and root may only login via su or at the machine console (not telnet/rsh, etc), this is safe.

OPTIONS¶

GLOBAL OPTIONS

This can be used for auth and account module types.

onerr=[fail|succeed]

If something weird happens (like unable to open the file), return with PAM_SUCCESS if onerr=succeed is given, else with the corresponding PAM error code.

file=/path/to/counter

File where to keep counts. Default is /var/log/tallylog.

audit

Will log the user name into the system log if the user is not found.

silent

Don't print informative messages.

no_log_info

Don't log informative messages via syslog(3).

AUTH OPTIONS

Authentication phase first increments attempted login counter and checks if user should be denied access. If the user is authenticated and the login process continues on call to pam_setcred(3) it resets the attempts counter.

deny=n

Deny access if tally for this user exceeds n.

lock_time=n

Always deny for n seconds after failed attempt.

unlock_time=n

Allow access after n seconds after failed attempt. If this option is used the user will be locked out for the specified amount of time after he exceeded his maximum allowed attempts. Otherwise the account is locked until the lock is removed by a manual intervention of the system administrator.

magic_root

If the module is invoked by a user with uid=0 the counter is not incremented. The sysadmin should use this for user launched services, like su, otherwise this argument should be omitted.

no_lock_time

Do not use the .fail_locktime field in /var/log/faillog for this user.

even_deny_root

Root account can become unavailable.

root_unlock_time=n

This option implies even_deny_root option. Allow access after n seconds to root account after failed attempt. If this option is used the root user will be locked out for the specified amount of time after he exceeded his maximum allowed attempts.

serialize

Serialize access to the tally file using locks. This option might be used only for non-multithreaded services because it depends on the fcntl locking of the tally file. Also it is a good idea to use this option only in such configurations where the time between auth phase and account or setcred phase is not dependent on the authenticating client. Otherwise the authenticating client will be able to prevent simultaneous authentications by the same user by simply artificially prolonging the time the file record lock is held.

ACCOUNT OPTIONS

Account phase resets attempts counter if the user is not magic root. This phase can be used optionally for services which don't call pam_setcred(3) correctly or if the reset should be done regardless of the failure of the account phase of other modules.

magic_root

If the module is invoked by a user with uid=0 the counter is not changed. The sysadmin should use this for user launched services, like su, otherwise this argument should be omitted.

MODULE TYPES PROVIDED¶

The auth and account module types are provided.

RETURN VALUES¶

PAM_AUTH_ERR

A invalid option was given, the module was not able to retrieve the user name, no valid counter file was found, or too many failed logins.

PAM_SUCCESS

Everything was successful.

PAM_USER_UNKNOWN

User not known.

NOTES¶

pam_tally2 is not compatible with the old pam_tally faillog file format. This is caused by requirement of compatibility of the tallylog file format between 32bit and 64bit architectures on multiarch systems.

There is no setuid wrapper for access to the data file such as when the pam_tally2.so module is called from xscreensaver. As this would make it impossible to share PAM configuration with such services the following workaround is used: If the data file cannot be opened because of insufficient permissions ( EACCES) the module returns PAM_IGNORE.

EXAMPLES¶

Add the following line to /etc/pam.d/login to lock the account after 4 failed logins. Root account will be locked as well. The accounts will be automatically unlocked after 20 minutes. The module does not have to be called in the account phase because the login calls pam_setcred(3) correctly.

auth     required       pam_securetty.so
auth     required       pam_tally2.so deny=4 even_deny_root unlock_time=1200
auth     required       pam_env.so
auth     required       pam_unix.so
auth     required       pam_nologin.so
account  required       pam_unix.so
password required       pam_unix.so
session  required       pam_limits.so
session  required       pam_unix.so
session  required       pam_lastlog.so nowtmp
session  optional       pam_mail.so standard

FILES¶

/var/log/tallylog

failure count logging file

AUTHOR¶

pam_tally2 was written by Tim Baverstock and Tomas Mraz.

06/04/2011