NAME¶

Plack::App::RDF::LinkedData - A Plack application for running RDF::LinkedData

SYNOPSIS¶

  my $linkeddata = Plack::App::RDF::LinkedData->new();
  $linkeddata->configure($config);
  my $rdf_linkeddata = $linkeddata->to_app;
  builder {
     enable "Head";
          enable "ContentLength";
          enable "ConditionalGET";
          $rdf_linkeddata;
  };

DESCRIPTION¶

This module sets up a basic Plack application to use RDF::LinkedData to serve Linked Data, while making sure it does follow best practices for doing so.

MAKE IT RUN¶

Configuration¶

Create a configuration file "rdf_linkeddata.json" that looks something like:

  {
        "base_uri"  : "http://localhost:3000/",
        "store" : {
                   "storetype"  : "Memory",
                   "sources" : [ {
                                "file" : "/path/to/your/data.ttl",
                                "syntax" : "turtle"
                               } ]
                   },
        "endpoint": {
                "html": {
                         "resource_links": true
                        }
                    },
        "cors": {
                  "origins": "*"
                },
        "void": {
                  "pagetitle": "VoID Description for my dataset"
                }
  }

In your shell set

  export RDF_LINKEDDATA_CONFIG=/to/where/you/put/rdf_linkeddata.json

Then, figure out where your install method installed the <linked_data.psgi>, script, e.g. by using locate. If it was installed in "/usr/local/bin", go:

  plackup /usr/local/bin/linked_data.psgi --host localhost --port 3000

The "endpoint"-part of the config sets up a SPARQL Endpoint. This requires the RDF::Endpoint module, which is recommended by this module. To use it, it needs to have some config, but will use defaults. The last, "cors"-part of the config enables Cross-Origin Resource Sharing, which is a W3C draft for relaxing security constraints to allow data to be shared across domains. In most cases, this is what you want when you are serving open data, but in some cases, notably intranets, this should be turned off by removing this part.

Details of the implementation¶

This server is a minimal Plack-script that should be sufficient for most linked data usages, and serve as a an example for most others. A minimal example of the required config file is provided above. There is a long example in the distribtion, which is used to run tests. In the config file, there is a "store" parameter, which must contain the RDF::Trine::Store config hashref. It may also have a "base_uri" URI and a "namespace" hashref which may contain prefix - URI mappings to be used in serializations. Note that this is a server that can only serve URIs of hosts you control, it is not a general purpose Linked Data manipulation tool, nor is it a full implementation of the Linked Data API <http://code.google.com/p/linked-data-api/>. The configuration is done using Config::JFDI and all its features can be used. Importantly, you can set the "RDF_LINKEDDATA_CONFIG" environment variable to point to the config file you want to use. See also Catalyst::Plugin::ConfigLoader for more information on how to use this config system.

Behaviour¶

The following documentation is adapted from the RDF::LinkedData::Apache, which preceeded this script.

•

"http://host.name/rdf/example"

 

Will return an HTTP 303 redirect based on the value of the request's Accept header. If the Accept header contains a recognized RDF media type or there is no Accept header, the redirect will be to "http://host.name/rdf/example/data", otherwise to "http://host.name/rdf/example/page". If the URI has a foaf:homepage or foaf:page predicate, the redirect will in the latter case instead use the first encountered object URI.

•

"http://host.name/rdf/example/data"

 

Will return a bounded description of the "http://host.name/rdf/example" resource in an RDF serialization based on the Accept header. If the Accept header does not contain a recognized media type, RDF/XML will be returned.

•

"http://host.name/rdf/example/page"

 

Will return an HTML description of the "http://host.name/rdf/example" resource including RDFa markup, or, if the URI has a foaf:homepage or foaf:page predicate, a 301 redirect to that object.

If the RDF resource for which data is requested is not the subject of any RDF triples in the underlying triplestore, the /page and /data redirects will not take place, and a HTTP 404 (Not Found) will be returned. The HTML description of resources will be enhanced by having metadata about the predicate of RDF triples loaded into the same triplestore. Currently, only a "rdfs:label"-predicate will be used for a title, as in this version, generation of HTML is done by RDF::RDFa::Generator.

Endpoint Usage¶

As stated earlier, this module can set up a SPARQL Endpoint for the data using RDF::Endpoint. Often, that's what you want, but if you don't want your users to have that kind of power, or you're worried it may overload your system, you may turn it off by simply having no "endpoint" section in your config. To use it, you just need to have an "endpoint" section with something in it, it doesn't really matter what, as it will use defaults for everything that isn't set. RDF::Endpoint is recommended by this module, but as it is optional, you may have to install it separately. It has many configuration options, please see its documentation for details. You may also need to set the "RDF_ENDPOINT_SHAREDIR" variable to whereever the endpoint shared files are installed to. These are some CSS and Javascript files that enhance the user experience. They are not strictly necessary, but it sure makes it pretty! RDF::Endpoint should do the right thing, though, so it shouldn't be necessary. Finally, note that while RDF::Endpoint can serve these files for you, this module doesn't help you do that. That's mostly because this author thinks you should serve them using some other parts of the deployment stack. For example, to use Apache, put this in your Apache config in the appropriate "VirtualHost" section:

  Alias /js/ /path/to/share/www/js/
  Alias /favicon.ico /path/to/share/www/favicon.ico
  Alias /css/ /path/to/share/www/css/

VoID Generator Usage¶

Like a SPARQL Endpoint, this is something most users would want. In fact, it is an even stronger recommendation than an endpoint. To enable it, you must have RDF::Generator::Void installed, and just anything in the config file to enable it, like in the SYNOPSIS example. You can set several things in the config, the property attributes of RDF::Generator::Void can all be set there somehow. You can also set "pagetitle", which sets the title for the RDFa page that can be generated. Moreover, you can set titles in several languages for the dataset using "titles" as the key, pointing to an arrayref with titles, where each title is a two element arrayref, where the first element is the title itself and the second is the language for that title. Please refer to the RDF::Generator::Void for more details about what can be set, and the "rdf_linkeddata_void.json" test config in the distribution for example. By adding an "add_void" config key, you can make pass a file to the generator so that arbitrary RDF can be added to the VoID description. It will check the last modification time of the file and only update the VoID description if it has been modified. This is usefil since as much of the VoID description cannot be simply generated. To use it, the configuration would in JSON look something like this:

        "add_void": { "file": "/data/add.ttl", "syntax": "turtle" }

where "file" is the full path to RDF that should be added and "syntax" is needed by the parser to parse it. Normally, the VoID description is cached in RAM and the store ETag is checked on every request to see if the description must be regenerated. If you use the "add_void" feature, you can force regeneration on the next request by touching the file.

FEEDBACK WANTED¶

Please contact the author if this documentation is unclear. It is really very simple to get it running, so if it appears difficult, this documentation is most likely to blame.

METHODS¶

You would most likely not need to call these yourself, but rather use the "linked_data.psgi" script supplied with the distribution.

"configure"

This is the only method you would call manually, as it can be used to pass a hashref with configuration to the application.

"prepare_app"

Will be called by Plack to set the application up.

"call"

Will be called by Plack to process the request.

AUTHOR¶

Kjetil Kjernsmo, "<kjetilk@cpan.org>"

COPYRIGHT & LICENSE¶

Copyright 2010-2012 Kjetil Kjernsmo This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.