Scroll to navigation

STRUCT USB_GADGET(9) Kernel Mode Gadget API STRUCT USB_GADGET(9)

NAME

struct_usb_gadget - represents a usb slave device

SYNOPSIS

struct usb_gadget {
  const struct usb_gadget_ops * ops;
  struct usb_ep * ep0;
  struct list_head ep_list;
  enum usb_device_speed speed;
  unsigned is_dualspeed:1;
  unsigned is_otg:1;
  unsigned is_a_peripheral:1;
  unsigned b_hnp_enable:1;
  unsigned a_hnp_support:1;
  unsigned a_alt_hnp_support:1;
  const char * name;
  struct device dev;
};

MEMBERS

ops
Function pointers used to access hardware-specific operations.
ep0
Endpoint zero, used when reading or writing responses to driver setup requests
ep_list
List of other endpoints supported by the device.
speed
Speed of current connection to USB host.
is_dualspeed
True if the controller supports both high and full speed operation. If it does, the gadget driver must also support both.
is_otg
True if the USB device port uses a Mini-AB jack, so that the gadget driver must provide a USB OTG descriptor.
is_a_peripheral
False unless is_otg, the “A” end of a USB cable is in the Mini-AB jack, and HNP has been used to switch roles so that the “A” device currently acts as A-Peripheral, not A-Host.
b_hnp_enable
OTG device feature flag, indicating that the A-Host enabled HNP support.
a_hnp_support
OTG device feature flag, indicating that the A-Host supports HNP at this port.
a_alt_hnp_support
OTG device feature flag, indicating that the A-Host only supports HNP on a different root port.
name
Identifies the controller hardware type. Used in diagnostics and sometimes configuration.
dev
Driver model state for this abstract device.

DESCRIPTION

Gadgets have a mostly-portable “gadget driver” implementing device functions, handling all usb configurations and interfaces. Gadget drivers talk to hardware-specific code indirectly, through ops vectors. That insulates the gadget driver from hardware details, and packages the hardware endpoints through generic i/o queues. The “usb_gadget” and “usb_ep” interfaces provide that insulation from the hardware.
Except for the driver data, all fields in this structure are read-only to the gadget driver. That driver data is part of the “driver model” infrastructure in 2.6 (and later) kernels, and for earlier systems is grouped in a similar structure that's not known to the rest of the kernel.
Values of the three OTG device feature flags are updated before the setup call corresponding to USB_REQ_SET_CONFIGURATION, and before driver suspend calls. They are valid only when is_otg, and when the device is acting as a B-Peripheral (so is_a_peripheral is false).

AUTHOR

David Brownell <dbrownell@users.sourceforge.net>
Author.

COPYRIGHT

March 2016 Kernel Hackers Manual 3.2.