NAME¶

pt-slave-delay - Make a MySQL slave server lag behind its master.

SYNOPSIS¶

Usage: pt-slave-delay [OPTION...] SLAVE-HOST [MASTER-HOST] pt-slave-delay starts and stops a slave server as needed to make it lag behind the master. The SLAVE-HOST and MASTER-HOST use DSN syntax, and values are copied from the SLAVE-HOST to the MASTER-HOST if omitted. To hold slavehost one minute behind its master for ten minutes:

   pt-slave-delay --delay 1m --interval 15s --run-time 10m slavehost

RISKS¶

The following section is included to inform users about the potential risks, whether known or unknown, of using this tool. The two main categories of risks are those created by the nature of the tool (e.g. read-only tools vs. read-write tools) and those created by bugs. pt-slave-delay is generally very low-risk. It simply starts and stops the replication SQL thread. This might cause monitoring systems to think the slave is having trouble. At the time of this release, we know of no bugs that could cause serious harm to users. The authoritative source for updated information is always the online issue tracking system. Issues that affect this tool will be marked as such. You can see a list of such issues at the following URL: http://www.percona.com/bugs/pt-slave-delay <http://www.percona.com/bugs/pt-slave-delay>. See also "BUGS" for more information on filing bugs and getting help.

DESCRIPTION¶

"pt-slave-delay" watches a slave and starts and stops its replication SQL thread as necessary to hold it at least as far behind the master as you request. In practice, it will typically cause the slave to lag between "--delay" and "--delay"+"--interval" behind the master. It bases the delay on binlog positions in the slave's relay logs by default, so there is no need to connect to the master. This works well if the IO thread doesn't lag the master much, which is typical in most replication setups; the IO thread lag is usually milliseconds on a fast network. If your IO thread's lag is too large for your purposes, "pt-slave-delay" can also connect to the master for information about binlog positions. If the slave's I/O thread reports that it is waiting for the SQL thread to free some relay log space, "pt-slave-delay" will automatically connect to the master to find binary log positions. If "--ask-pass" and "--daemonize" are given, it is possible that this could cause it to ask for a password while daemonized. In this case, it exits. Therefore, if you think your slave might encounter this condition, you should be sure to either specify "--use-master" explicitly when daemonizing, or don't specify "--ask-pass". The SLAVE-HOST and optional MASTER-HOST are both DSNs. See "DSN OPTIONS". Missing MASTER-HOST values are filled in with values from SLAVE-HOST, so you don't need to specify them in both places. "pt-slave-delay" reads all normal MySQL option files, such as ~/.my.cnf, so you may not need to specify username, password and other common options at all. "pt-slave-delay" tries to exit gracefully by trapping signals such as Ctrl-C. You cannot bypass "--[no]continue" with a trappable signal.

PRIVILEGES¶

pt-slave-delay requires the following privileges: PROCESS, REPLICATION CLIENT, and SUPER.

OUTPUT¶

If you specify "--quiet", there is no output. Otherwise, the normal output is a status message consisting of a timestamp and information about what "pt-slave-delay" is doing: starting the slave, stopping the slave, or just observing.

OPTIONS¶

This tool accepts additional command-line arguments. Refer to the "SYNOPSIS" and usage information for details.

--ask-pass

Prompt for a password when connecting to MySQL.

--charset

short form: -A; type: string

 

Default character set. If the value is utf8, sets Perl's binmode on STDOUT to utf8, passes the mysql_enable_utf8 option to DBD::mysql, and runs SET NAMES UTF8 after connecting to MySQL. Any other value sets binmode on STDOUT without the utf8 layer, and runs SET NAMES after connecting to MySQL.

--config

type: Array

 

Read this comma-separated list of config files; if specified, this must be the first option on the command line.

--[no]continue

default: yes

 

Continue replication normally on exit. After exiting, restart the slave's SQL thread with no UNTIL condition, so it will run as usual and catch up to the master. This is enabled by default and works even if you terminate "pt-slave-delay" with Control-C.

--daemonize

Fork to the background and detach from the shell. POSIX operating systems only.

--database

short form: -D; type: string

 

The database to use for the connection.

--defaults-file

short form: -F; type: string

 

Only read mysql options from the given file. You must give an absolute pathname.

--delay

type: time; default: 1h

 

How far the slave should lag its master.

--help

Show help and exit.

--host

short form: -h; type: string

 

Connect to host.

--interval

type: time; default: 1m

 

How frequently "pt-slave-delay" should check whether the slave needs to be started or stopped.

--log

type: string

 

Print all output to this file when daemonized.

--password

short form: -p; type: string

 

Password to use when connecting.

--pid

type: string

 

Create the given PID file when daemonized. The file contains the process ID of the daemonized instance. The PID file is removed when the daemonized instance exits. The program checks for the existence of the PID file when starting; if it exists and the process with the matching PID exists, the program exits.

--port

short form: -P; type: int

 

Port number to use for connection.

--quiet

short form: -q

 

Don't print informational messages about operation. See OUTPUT for details.

--run-time

type: time

 

How long "pt-slave-delay" should run before exiting. The default is to run forever.

--set-vars

type: string; default: wait_timeout=10000

 

Set these MySQL variables. Immediately after connecting to MySQL, this string will be appended to SET and executed.

--socket

short form: -S; type: string

 

Socket file to use for connection.

--use-master

Get binlog positions from master, not slave. Don't trust the binlog positions in the slave's relay log. Connect to the master and get binlog positions instead. If you specify this option without giving a MASTER-HOST on the command line, "pt-slave-delay" examines the slave's SHOW SLAVE STATUS to determine the hostname and port for connecting to the master.

 

"pt-slave-delay" uses only the MASTER_HOST and MASTER_PORT values from SHOW SLAVE STATUS for the master connection. It does not use the MASTER_USER value. If you want to specify a different username for the master than the one you use to connect to the slave, you should specify the MASTER-HOST option explicitly on the command line.

--user

short form: -u; type: string

 

User for login if not current user.

--version

Show version and exit.

DSN OPTIONS¶

These DSN options are used to create a DSN. Each option is given like "option=value". The options are case-sensitive, so P and p are not the same option. There cannot be whitespace before or after the "=" and if the value contains whitespace it must be quoted. DSN options are comma-separated. See the percona-toolkit manpage for full details.

•

A

 

dsn: charset; copy: yes

 

Default character set.

•

D

 

dsn: database; copy: yes

 

Default database.

•

F

 

dsn: mysql_read_default_file; copy: yes

 

Only read default options from the given file

•

h

 

dsn: host; copy: yes

 

Connect to host.

•

p

 

dsn: password; copy: yes

 

Password to use when connecting.

•

P

 

dsn: port; copy: yes

 

Port number to use for connection.

•

S

 

dsn: mysql_socket; copy: yes

 

Socket file to use for connection.

•

u

 

dsn: user; copy: yes

 

User for login if not current user.

ENVIRONMENT¶

The environment variable "PTDEBUG" enables verbose debugging output to STDERR. To enable debugging and capture all output to a file, run the tool like:

   PTDEBUG=1 pt-slave-delay ... > FILE 2>&1

Be careful: debugging output is voluminous and can generate several megabytes of output.

SYSTEM REQUIREMENTS¶

You need Perl, DBI, DBD::mysql, and some core packages that ought to be installed in any reasonably new version of Perl.

BUGS¶

For a list of known bugs, see http://www.percona.com/bugs/pt-slave-delay <http://www.percona.com/bugs/pt-slave-delay>. Please report bugs at https://bugs.launchpad.net/percona-toolkit <https://bugs.launchpad.net/percona-toolkit>. Include the following information in your bug report:

•

Complete command-line used to run the tool

•

Tool "--version"

•

MySQL version of all servers involved

•

Output from the tool including STDERR

•

Input files (log/dump/config files, etc.)

If possible, include debugging output by running the tool with "PTDEBUG"; see "ENVIRONMENT".

DOWNLOADING¶

Visit http://www.percona.com/software/percona-toolkit/ <http://www.percona.com/software/percona-toolkit/> to download the latest release of Percona Toolkit. Or, get the latest release from the command line:

   wget percona.com/get/percona-toolkit.tar.gz
   wget percona.com/get/percona-toolkit.rpm
   wget percona.com/get/percona-toolkit.deb

You can also get individual tools from the latest release:

   wget percona.com/get/TOOL

Replace "TOOL" with the name of any tool.

AUTHORS¶

Sergey Zhuravlev and Baron Schwartz

ABOUT PERCONA TOOLKIT¶

This tool is part of Percona Toolkit, a collection of advanced command-line tools developed by Percona for MySQL support and consulting. Percona Toolkit was forked from two projects in June, 2011: Maatkit and Aspersa. Those projects were created by Baron Schwartz and developed primarily by him and Daniel Nichter, both of whom are employed by Percona. Visit <http://www.percona.com/software/> for more software developed by Percona.

COPYRIGHT, LICENSE, AND WARRANTY¶

This program is copyright 2007-2011 Sergey Zhuravle and Baron Schwartz, 2011-2012 Percona Inc. Feedback and improvements are welcome. THIS PROGRAM IS PROVIDED "AS IS" AND WITHOUT ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation, version 2; OR the Perl Artistic License. On UNIX and similar systems, you can issue `man perlgpl' or `man perlartistic' to read these licenses. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA.

VERSION¶

pt-slave-delay 2.1.2