Scroll to navigation

IPSEC_SCEPCLIENT(8) IPSEC_SCEPCLIENT(8)

NAME

ipsec scepclient - Client for the SCEP protocol

SYNOPSIS

ipsec scepclient [argument ...]
 
ipsec scepclient --help
 
ipsec scepclient --version

DESCRIPTION

scepclient is a client implementation of Cisco System's Simple Certificate Enrollment Protocol (SCEP) written for Linux strongSwan <http://www.strongswan.org>. scepclient is designed to be used for certificate enrollment on machines using the OpenSource IPsec solution strongSwan.

FEATURES

scepclient implements the following features of SCEP:
 
-
Automatic enrollment of client certificate using a preshared secret
-
Manual enrollment of client certificate. Offline fingerprint check required!
-
Acquisition of CA certificate(s)

OPTIONS

Basic Startup Options

-v, --version
Display the version of ipsec scepclient.
-h, --help
Display usage of ipsec scepclient.
 

General Options

-u, --url url
Full HTTP URL of the SCEP server to be used for certificate enrollment and CA certificate acquisition.
-+, --optionsfrom filename
Reads additional options from filename.
-f, --force
Overwrite existing output file[s].
-q, --quiet
Do not write log output to stderr.
 

Options for CA Certificate Acquisition

-o, --out cacert[=filename]
Output file of acquired CA certificate. If more then one CA certificate is available, filename is used as prefix for the resulting files.
 
The default filename is $CONFDIR/ipsec.d/cacerts/caCert.der.
 

Options For Certificate Enrollment

-i, --in type[=filename]
Input file for certificate enrollment. This option can be specified multiple times to specify input files for every type. Input files can bei either DER or PEM encoded.
Supported values for type:
pkcs1
RSA private key in PKCS#1 file format. If no input of this type is specified, a RSA key gets generated.
 
The default filename is $CONFDIR/ipsec.d/private/myKey.der.
cacert-enc
CA certificate to encrypt the SCEP request. Has to be specified for certificate enrollment.
 
The default filename is $CONFDIR/ipsec.d/cacerts/caCert.der.
cacert-sig
CA certificate to check signature of SCEP reply. Has to be specified for certificate enrollment.
 
The default filename is $CONFDIR/ipsec.d/cacerts/caCert.der.
-k, --keylength bits
sets the key length for RSA key generation. The default length for a generated rsa key is set to 2048 bit.
-D, --days days
Validity of the self-signed X.509 certificate in days. The default is 1825 days (5 years).
-S, --startdate YYMMDDHHMMSSZ
defines the notBefore date when the X.509 certificate becomes valid. The date has the format YYMMDDHHMMSS and must be specified in UTC (Zulu time). If the --startdate option is not specified then the current date is taken as a default.
-E, --enddate YYMMDDHHMMSSZ
defines the notAfter date when the X.509 certificate will expire. The date has the format YYMMDDHHMMSS and must be specified in UTC (Zulu time). If the --enddate option is not specified then the default notAfter value is computed by adding the validity interval specified by the --days option to the notBefore date.
-d, --dn dn
Distinguished name as comma separated list of relative distinguished names. Use quotation marks for a distinguished name containing spaces. If the --dn parameter is missing then the default "C=CH, O=Linux strongSwan, CN= hostname" is used with hostname being the return value of the gethostname() function.
-s, --subjectAltName type=value
Include subjectAltName in certificate request. This option can be specified multiple times to specify a subjectAltName for every type.
Supported values for type:
email
subjectAltName is a email address.
dns
subjectAltName is a hostname.
ip
subjectAltName is a IP address.
-p, --password pw
Password to be included as a challenge password in SCEP request. If pw is %prompt', the password gets prompted for on the command line.
- In automatic mode, this password corresponds to the preshared secret for the given enrollment.
- In manual mode, this password can be used to later revoke the corresponding certificate.
-a, --algorithm algo
Change symmetric algorithm to use for encryption of certificate Request. The default is 3des-cbc.
Supported values for algo:
des
DES-CBC encryption (key size = 56 bit).
3des
Triple DES-EDE-CBC encryption (key size = 168 bit).
aes128
AES-CBC encryption (key size = 128 bit).
aes192
AES-CBC encryption (key size = 192 bit).
aes256
AES-CBC encryption (key size = 256 bit).
camellia128
Camellia-CBC encryption (key size = 128 bit).
camellia192
Camelllia-CBC encryption (key size = 192 bit).
camellia256
Camellia-CBC encryption (key size = 256 bit).
-o, --out type[=filename]
Output file for certificate enrollment. This option can be specified multiple times to specify output files for every type.
Supported values for type:
pkcs1
RSA private key in PKCS#1 file format. If specified, the RSA key used for enrollment is stored in file filename. If none of the types listed below are specified, scepclient will stop after outputting this file.
 
The default filename is $CONFDIR/ipsec.d/private/myKey.der.
pkcs10
PKCS#10 certificate request. If specified, the PKCS#10 request used or certificate enrollment is stored in file filename. If none of the types listed below are specified, scepclient will stop after outputting this file.
 
The default filename is $CONFDIR/ipsec.d/req/myReq.der.
pkcs7
PKCS#7 SCEP request as it is sent using HTTP to the SCEP server. If specified, this SCEP request is stored in file filename. If none of types listed below is not specified, scepclient will stop after outputting this file.
 
The default filename is $CONFDIR/ipsec.d/req/pkcs7.der.
cert-self
Self-signed certificate. If specified the self-signed certificate is stored in file filename.
 
The default filename is $CONFDIR/ipsec.d/certs/selfCert.der.
cert
Enrolled certificate. This type must be specified for certificate enrollment. The enrolled certificate is stored in file filename.
 
The default filename is set to $CONFDIR/ipsec.d/certs/myCert.der.
-m, --method method
Change HTTP request method for certificate enrollment. Default is get.
Supported values for method:
post
Certificate enrollment using HTTP POST. Must be supported by the given SCEP server.
get
Certificate enrollment using HTTP GET.
-t, --interval seconds
Set interval time in seconds when polling in manual mode. The default interval is set to 5 seconds.
-x, --maxpolltime seconds
Set max time in seconds to poll in manual mode. The default max time is set to unlimited.
 

Debugging Output Options:

-A, --debug-all
Log everything except private data.
-P, --debug-parsing
Log parsing relevant stuff.
-R, --debug-raw
Log raw hex dumps.
-C, --debug-control
Log information about control flow.
-M, --debug-controlmore
Log more detailed information about control flow.
-X, --debug-private
Log sensitive data (e.g. private keys).

EXAMPLES

ipsec scepclient --out caCert --url http://scepserver/cgi-bin/pkiclient.exe -f
Acquire CA certificate from SCEP server and store it in the default file $CONFDIR/ipsec.d/cacerts/caCert.der. If more then one CA certificate is returned, store them in files named caCert.der-1', caCert.der-2', etc.
 
Existing files are overwritten.
ipsec scepclient --out pkcs1=joeKey.der -k 1024
Generate RSA private key with key length of 1024 bit and store it in file joeKey.der.
ipsec scepclient --in pkcs1=joeKey.der --out pkcs10=joeReq.der \
 
--dn ”C=AT, CN=John Doe” -s email=john@doe.com -p mypassword
Generate a PKCS#10 request and store it in file joeReq.der. Use the RSA private key joeKey.der created earlier to sign the PKCS#10-Request. In addition to the distinguished name include a email-subjectAltName and a challenge password in the request.
ipsec scepclient --out pkcs1=joeKey.der --out cert==joeCert.der \
 
--dn ”C=CH, CN=John Doe” -k 512 -p 5xH2pnT7wq \
 
--url http://scep.hsr.ch/cgi-bin/pkiclient.exe \
 
--in cacert-enc=caCert.der --in cacert-sig=caCert.der
Generate a new RSA key for the request and store it in joeKey.der. Then enroll a certificate and store as joeCert.der. The challenge password is '5xH2pnT7wq'. The encryption and signature check has to be made with the same CA certificate caCert.der.
 
 

BUGS

--optionsfrom seems to have parsing problems reading option files containing strings in quotation marks.

COPYRIGHT

Copyright (C) 2005 Jan Hutter, Martin Willi
 
Hochschule fuer Technik Rapperswil
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. See <http://www.fsf.org/copyleft/gpl.txt>.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
29 September 2005 Jan Hutter, Martin Willi