NAME¶
es2ts - convert ES to TS
SYNOPSIS¶
es2ts [
switches]
<infile> <outfile>
DESCRIPTION¶
- TS tools version 1.11, es2ts built Nov 11 2008
17:15:46
- Convert an elementary video stream to H.222 transport
stream. Supports input streams conforming to MPEG-2 (H.262), MPEG-4/AVC
(H.264) and AVS. Also supports MPEG-1 input streams, insofar as MPEG-2 is
backwards compatible with MPEG-1.
- Note that this program works by reading and packaging the
elementary stream packages directly - it does not parse them as H.262 or
H.264 data.
Files:¶
- <infile>
- is a file containing the Elementary Stream data (but see
-stdin below)
- <outfile>
- is an H.222 Transport Stream file (but see -stdout
and -host below)
Switches:¶
- -pid <pid>
- <pid> is the video PID to use for the data. Use '-pid
0x<pid>' to specify a hex value. Defaults to 0x68.
- -pmt <pid>
- <pid> is the PMT PID to use. Use '-pmt 0x<pid>'
to specify a hex value. Defaults to 0x66
- -verbose, -v
- Output summary information about each ES packet as it is
read
- -quiet, -q
- Only output error messages
- -stdin
- Take input from <stdin>, instead of a named file
- -stdout
- Write output to <stdout>, instead of a named file
Forces -quiet.
- -host <host>, -host
<host>:<port>
- Writes output (over TCP/IP) to the named <host>,
instead of to a named file. If <port> is not specified, it defaults
to 88.
- -max <n>, -m <n>
- Maximum number of ES data units to read
Stream type:¶
- When the TS data is being output, it is flagged to indicate
whether it conforms to H.262, H.264 or AVS. It is important to get this
right, as it will affect interpretation of the TS data.
- If input is from a file, then the program will look at the
start of the file to determine if the stream is H.264, H.262 or AVS. This
process may occasionally come to the wrong conclusion, in which case the
user can override the choice using the following switches.
- If input is from standard input (via -stdin), then
it is not possible for the program to make its own decision on the input
stream type. Instead, it defaults to H.262, and relies on the user
indicating if this is wrong.
- -h264, -avc
- Force the program to treat the input as MPEG-4/AVC.
- -h262
- Force the program to treat the input as MPEG-2.
- -avs
- Force the program to treat the input as AVS.
- TS tools version 1.11, es2ts built Nov 11 2008
17:15:46
- Convert an elementary video stream to H.222 transport
stream. Supports input streams conforming to MPEG-2 (H.262), MPEG-4/AVC
(H.264) and AVS. Also supports MPEG-1 input streams, insofar as MPEG-2 is
backwards compatible with MPEG-1.
- Note that this program works by reading and packaging the
elementary stream packages directly - it does not parse them as H.262 or
H.264 data.
Files:¶
- <infile>
- is a file containing the Elementary Stream data (but see
-stdin below)
- <outfile>
- is an H.222 Transport Stream file (but see -stdout
and -host below)
Switches:¶
- -pid <pid>
- <pid> is the video PID to use for the data. Use '-pid
0x<pid>' to specify a hex value. Defaults to 0x68.
- -pmt <pid>
- <pid> is the PMT PID to use. Use '-pmt 0x<pid>'
to specify a hex value. Defaults to 0x66
- -verbose, -v
- Output summary information about each ES packet as it is
read
- -quiet, -q
- Only output error messages
- -stdin
- Take input from <stdin>, instead of a named file
- -stdout
- Write output to <stdout>, instead of a named file
Forces -quiet.
- -host <host>, -host
<host>:<port>
- Writes output (over TCP/IP) to the named <host>,
instead of to a named file. If <port> is not specified, it defaults
to 88.
- -max <n>, -m <n>
- Maximum number of ES data units to read
Stream type:¶
- When the TS data is being output, it is flagged to indicate
whether it conforms to H.262, H.264 or AVS. It is important to get this
right, as it will affect interpretation of the TS data.
- If input is from a file, then the program will look at the
start of the file to determine if the stream is H.264, H.262 or AVS. This
process may occasionally come to the wrong conclusion, in which case the
user can override the choice using the following switches.
- If input is from standard input (via -stdin), then
it is not possible for the program to make its own decision on the input
stream type. Instead, it defaults to H.262, and relies on the user
indicating if this is wrong.
- -h264, -avc
- Force the program to treat the input as MPEG-4/AVC.
- -h262
- Force the program to treat the input as MPEG-2.
- -avs
- Force the program to treat the input as AVS.
SEE ALSO¶
The full documentation for
es2ts is maintained as a Texinfo manual.
Please check
http://tstools.berlios.de for more information.
