Supported formats¶

Currently, this approach has been successfully implemented to several kinds of text formatting formats:

man (mature parser)

The good old manual pages' format, used by so many programs out there. po4a support is very welcome here since this format is somewhat difficult to use and not really friendly to newbies.

The Locale::Po4a::Man(3pm) module also supports the mdoc format, used by the BSD man pages (they are also quite common on Linux).

AsciiDoc (mature parser)

This format is a lightweight markup format intended to ease the authoring of documentation. It is for example used to document the git system. Those manpages are translated using po4a.

See Locale::Po4a::AsciiDoc for details.

pod (mature parser)

This is the Perl Online Documentation format. The language and extensions themselves are documented using this format in addition to most existing Perl scripts. It makes easy to keep the documentation close to the actual code by embedding them both in the same file. It makes programmer's life easier, but unfortunately, not the translator's, until you use po4a.

See Locale::Po4a::Pod for details.

sgml (mature parser)

Even if superseded by XML nowadays, this format is still used for documents which are more than a few screens long. It can even be used for complete books. Documents of this length can be very challenging to update. diff often reveals useless when the original text was re-indented after update. Fortunately, po4a can help you after that process.

Currently, only DebianDoc and DocBook DTD are supported, but adding support for a new one is really easy. It is even possible to use po4a on an unknown SGML DTD without changing the code by providing the needed information on the command line. See Locale::Po4a::Sgml(3pm) for details.

TeX / LaTeX (mature parser)

The LaTeX format is a major documentation format used in the Free Software world and for publications.

The Locale::Po4a::LaTeX(3pm) module was tested with the Python documentation, a book and some presentations.

text (mature parser)

The Text format is the base format for many formats that include long blocks of text, including Markdown, fortunes, YAML front matter section, debian/changelog, and debian/control.

This supports the common format used in Static Site Generators, READMEs, and other documentation systems. See Locale::Po4a::Text(3pm) for details.

xml and XHMTL (probably mature parser)

The XML format is a base format for many documentation formats.

Currently, the DocBook DTD (see Locale::Po4a::Docbook(3pm) for details) and XHTML are supported by po4a.

BibTex (probably mature parser)

The BibTex format is used alongside LaTex for formatting lists of references (bibliographies).

See Locale::Po4a::BibTex for details.

Docbook (probably mature parser)

A XML-based markup language that uses semantic tags to describe documents.

See Locale::Po4a:Docbook for greater details.

Guide XML (probably mature parser)

A XML documentation format. This module was developed specifically to help with supporting and maintaining translations of Gentoo Linux documentation up until at least March 2016 (Based on the Wayback Machine). Gentoo have since moved to the DevBook XML format.

See Locale::Po4a:Guide for greater details.

Wml (probably mature parser)

The Web Markup Language, do not mixup WML with the WAP stuff used on cell phones. This module relies on the Xhtml module, which itself relies on the XmL module.

See Locale::Po4a::Wml for greater details.

Yaml (probably mature parser)

A strict superset of JSON. YAML is often used as systems or configuration projects. YAML is at the core of Red Hat's Ansible.

See Locale::Po4a::Yaml for greater details.

RubyDoc (probably mature parser)

The Ruby Document (RD) format, originally the default documentation format for Ruby and Ruby projects before converted to RDoc in 2002. Though apparently the Japanese version of the Ruby Reference Manual still use RD.

See Locale::Po4a::RubyDoc for greater details.

Halibut (probably experimental parser)

A documentation production system, with elements similar to TeX, debiandoc-sgml, TeXinfo, and others, developed by Simon Tatham, the developer of PuTTY.

See Locale::Po4a:Halibut for greater details.

Ini (probably experimental parser)

Configuration file format popularized by MS-DOS.

See Locale::Po4a::Ini for greater details.

texinfo (very highly experimental parser)

All of the GNU documentation is written in this format (it's even one of the requirements to become an official GNU project). The support for Locale::Po4a::Texinfo(3pm) in po4a is still at the beginning. Please report bugs and feature requests.

Others supported formats

Po4a can also handle some more rare or specialized formats, such as the documentation of compilation options for the 2.4+ Linux kernels (Locale::Po4a::KernelHelp) or the diagrams produced by the dia tool (Locale::Po4a:Dia). Adding a new format is often very easy and the main task is to come up with a parser for your target format. See Locale::Po4a::TransTractor(3pm) for more information about this.

Unsupported formats

Unfortunately, po4a still lacks support for several documentation formats. Many of them would be easy to support in po4a. This includes formats not just used for documentation, such as, package descriptions (deb and rpm), package installation scripts questions, package changelogs, and all the specialized file formats used by programs such as game scenarios or wine resource files.

Graphical overview of the po4a scripts¶

The following schema gives an overview of how each po4a script can be used. Here, master.doc is an example name for the documentation to be translated; XX.doc is the same document translated in the language XX while doc.XX.po is the translation catalog for that document in the XX language. Documentation authors will mostly be concerned with master.doc (which can be a manpage, an XML document, an asciidoc file or similar); the translators will be mostly concerned with the PO file, while the end users will only see the XX.doc file.

                                   master.doc
                                       |
                                       V
     +<-----<----+<-----<-----<--------+------->-------->-------+
     :           |                     |                        :
{translation}    |         { update of master.doc }             :
     :           |                     |                        :
   XX.doc        |                     V                        V
 (optional)      |                 master.doc ->-------->------>+
     :           |                   (new)                      |
     V           V                     |                        |
  [po4a-gettextize]   doc.XX.po -->+   |                        |
          |            (old)       |   |                        |
          |              ^         V   V                        |
          |              |     [po4a-updatepo]                  |
          V              |           |                          V
   translation.pot       ^           V                          |
          |              |        doc.XX.po                     |
          |              |         (fuzzy)                      |
   { translation }       |           |                          |
          |              ^           V                          V
          |              |     {manual editing}                 |
          |              |           |                          |
          V              |           V                          V
      doc.XX.po --->---->+<---<-- doc.XX.po    addendum     master.doc
      (initial)                 (up-to-date)  (optional)   (up-to-date)
          :                          |            |             |
          :                          V            |             |
          +----->----->----->------> +            |             |
                                     |            |             |
                                     V            V             V
                                     +------>-----+------<------+
                                                  |
                                                  V
                                           [po4a-translate]
                                                  |
                                                  V
                                                XX.doc
                                             (up-to-date)

This schema is complicated, but in practice only the right part (involving po4a-updatepo(1) and po4a-translate(1)) is used once the project is setup and configured.

The left part depicts how po4a-gettextize(1) can be used to convert an existing translation project to the po4a infrastructure. This script takes an original document and its translated counterpart, and tries to build the corresponding PO file. Such manual conversion is rather cumbersome (see the po4a-gettextize(1) documentation for more details), but it is only needed once to convert your existing translations. If you don't have any translation to convert, you can forget about this and focus on the right part of the schema.

On the top right part, the action of the original author is depicted, updating the documentation. The middle right part depicts the automatic actions of po4a-updatepo(1). The new material is extracted and compared against the exiting translation. The previous translation is used for the parts that didn't change, while partially modified parts are connected to the previous translation with a "fuzzy" marker indicating that the translation must be updated. New or heavily modified material is left untranslated.

Then, the manual editing reported depicts the action of the translators, that modify the PO files to provide translations to every original string and paragraph. This can be done using either a specific editor such as the GNOME Translation Editor, KDE's Lokalize or poedit, or using an online localization platform such as weblate or pootle. The translation result is a set of PO files, one per language. Please refer to the gettext documentation for more details.

The bottom part of the figure shows how po4a-translate(1) creates a translated source document from the master.doc original document and the doc.XX.po translation catalog that was updated by the translators. The structure of the document is reused, while the original content is replaced by its translated counterpart. Optionally, an addendum can be used to add some extra text to the translation. This is often used to add the name of the translator to the final document. See below for details.

As noted before, the po4a(1) program combines the effects of the separated scripts, updating the PO files and the translated document in one invocation. The underlying logic remains the same.

Starting a new translation¶

If you use po4a(1), there is no specific step to start a translation. You just have to list the languages in the configuration file, and the missing PO files are automatically created. Naturally, the translator then have to provide translations for every content used in your documents. po4a(1) also creates a POT file, that is a PO template file. Potential translators can translate your project into a new language by renaming this file and providing the translations in their language.

If you prefer to use the individual scripts separately, you should use po4a-gettextize(1) as follows to create the POT file. This file can then be copied into XX.po to initiate a new translation.

  $ po4a-gettextize --format <format> --master <master.doc> --po <translation.pot>

The master document is used in input, while the POT file is the output of this process.

Integrating changes to the original document¶

The script to use for that is po4a-updatepo(1) (please refer to its documentation for details):

  $ po4a-updatepo --format <format> --master <new_master.doc> --po <old_doc.XX.po>

The master document is used in input, while the PO file is updated: it is used both in input and output.

Generating a translated document¶

Once you're done with the translation, you want to get the translated documentation and distribute it to users along with the original one. For that, use the po4a-translate(1) program as follows:

  $ po4a-translate --format <format> --master <master.doc> --po <doc.XX.po> --localized <XX.doc>

Both the master and PO files are used in input, while the localized file is the output of this process.

Using addenda to add extra text to translations¶

Adding new text to the translation is probably the only thing that is easier in the long run when you translate files manually :). This happens when you want to add an extra section to the translated document, not corresponding to any content in the original document. The classical use case is to give credits to the translation team, and to indicate how to report translation-specific issues.

With po4a, you have to specify addendum files, that can be conceptually viewed as patches applied to the localized document after processing. Each addendum must be provided as a separate file, which format is however very different from the classical patches. The first line is a header line, defining the insertion point of the addendum (with an unfortunately cryptic syntax -- see below) while the rest of the file is added verbatim at the determined position.

The header line must begin with the string PO4A-HEADER:, followed by a semi-colon separated list of key=value fields.

For example, the following header declares an addendum that must be placed at the very end of the translation.

 PO4A-HEADER: mode=eof

Things are more complex when you want to add your extra content in the middle of the document. The following header declares an addendum that must be placed after the XML section containing the string "About this document" in translation.

 PO4A-HEADER: position=About this document; mode=after; endboundary=</section>

In practice, when trying to apply an addendum, po4a searches for the first line matching the "position" argument (this can be a regexp). Do not forget that po4a considers the translated document here. This documentation is in English, but your line should probably read as follows if you intend your addendum to apply to the French translation of the document.

 PO4A-HEADER: position=À propos de ce document; mode=after; endboundary=</section>

Once the "position" is found in the target document, po4a searches for the next line after the "position" that matches the provided "endboundary". The addendum is added right after that line (because we provided an endboundary, i.e. a boundary ending the current section).

The exact same effect could be obtained with the following header, that is equivalent:

 PO4A-HEADER: position=About this document; mode=after; beginboundary=<section>

Here, po4a searches for the first line matching "<section"> after the line matching "About this document" in the translation, and add the addendum before that line since we provided a beginboundary, i.e. a boundary marking the beginning of the next section. So this header line requires to place the addendum after the section containing "About this document", and instruct po4a that a section starts with a line containing the "<section"> tag. This is equivalent to the previous example because what you really want is to add this addendum either after "/section"> or before "<section">.

You can also set the insertion mode to the value "before", with a similar semantic: combining "mode=before" with an "endboundary" will put the addendum just after the matched boundary, that the last potential boundary line before the "position". Combining "mode=before" with an "beginboundary" will put the addendum just before the matched boundary, that the last potential boundary line before the "position".

  Mode   | Boundary kind |     Used boundary      | Insertion point compared to the boundary
 ========|===============|========================|=========================================
 'before'| 'endboundary' | last before 'position' | Right after the selected boundary
 'before'|'beginboundary'| last before 'position' | Right before the selected boundary
 'after' | 'endboundary' | first after 'position' | Right after the selected boundary
 'after' |'beginboundary'| first after 'position' | Right before the selected boundary
 'eof'   |   (none)      |  n/a                   | End of file

Hint and tricks about addenda

• Remember that these are regexp. For example, if you want to match the end of a nroff section ending with the line ".fi", do not use ".fi" as endboundary, because it will match with "the[ fi]le", which is obviously not what you expect. The correct endboundary in that case is: "^\.fi$".
• White spaces ARE important in the content of the "position" and boundaries. So the two following lines are different. The second one will only be found if there is enough trailing spaces in the translated document.

   PO4A-HEADER: position=About this document; mode=after; beginboundary=<section>
   PO4A-HEADER: position=About this document ; mode=after; beginboundary=<section>
      

• Although this context search may be considered to operate roughly on each line of the translated document, it actually operates on the internal data string of the translated document. This internal data string may be a text spanning a paragraph containing multiple lines or may be a XML tag itself alone. The exact insertion point of the addendum must be before or after the internal data string and can not be within the internal data string.
• Pass the -vv argument to po4a to understand how the addenda are added to the translation. It may also help to run po4a in debug mode to see the actual internal data string when your addendum does not apply.

Addenda examples

• If you want to add something after the following nroff section:

    .SH "AUTHORS"
      

  You should select a two step approach by setting mode=after. Then you should narrow down search to the line after AUTHORS with the position argument regex. Then, you should match the beginning of the next section (i.e., ^\.SH) with the beginboundary argument regex. That is to say:

   PO4A-HEADER:mode=after;position=AUTHORS;beginboundary=\.SH
      

• If you want to add something right after a given line (e.g. after the line "Copyright Big Dude"), use a position matching this line, mode=after and give a beginboundary matching any line.

   PO4A-HEADER:mode=after;position=Copyright Big Dude, 2004;beginboundary=^
      

• If you want to add something at the end of the document, give a position matching any line of your document (but only one line. Po4a won't proceed if it's not unique), and give an endboundary matching nothing. Don't use simple strings here like "EOF", but prefer those which have less chance to be in your document.

   PO4A-HEADER:mode=after;position=About this document;beginboundary=FakePo4aBoundary
      

More detailed example

Original document (POD formatted):

 |=head1 NAME
 |
 |dummy - a dummy program
 |
 |=head1 AUTHOR
 |
 |me

Then, the following addendum will ensure that a section (in French) about the translator is added at the end of the file (in French, "TRADUCTEUR" means "TRANSLATOR", and "moi" means "me").

 |PO4A-HEADER:mode=after;position=AUTEUR;beginboundary=^=head
 |
 |=head1 TRADUCTEUR
 |
 |moi
 |

To put your addendum before the AUTHOR, use the following header:

 PO4A-HEADER:mode=after;position=NOM;beginboundary=^=head1

This works because the next line matching the beginboundary /^=head1/ after the section "NAME" (translated to "NOM" in French), is the one declaring the authors. So, the addendum will be put between both sections. Note that if another section is added between NAME and AUTHOR sections later, po4a will wrongfully put the addenda before the new section.

To avoid this you may accomplish the same using mode=before:

 PO4A-HEADER:mode=before;position=^=head1 AUTEUR

How do you pronounce po4a?¶

I personally vocalize it as pouah <https://en.wiktionary.org/wiki/pouah>, which is a French onomatopoetic that we use in place of yuck :) I may have a strange sense of humor :)

What about the other translation tools for documentation using gettext?¶

There are a few of them. Here is a possibly incomplete list, and more tools are coming at the horizon.

poxml

This is the tool developed by KDE people to handle DocBook XML. AFAIK, it was the first program to extract strings to translate from documentation to PO files, and inject them back after translation.

It can only handle XML, and only a particular DTD. I'm quite unhappy with the handling of lists, which end in one big msgid. When the list become big, the chunk becomes harder to swallow.

po-debiandoc

This program done by Denis Barbier is a sort of precursor of the po4a SGML module, which more or less deprecates it. As the name says, it handles only the DebianDoc DTD, which is more or less a deprecated DTD.

xml2po.py

Used by the GIMP Documentation Team since 2004, works quite well even if, as the name suggests, only with XML files and needs specially configured makefiles.

Sphinx

The Sphinx Documentation Project also uses gettext extensively to manage its translations. Unfortunately, it works only for a few text formats, rest and markdown, although it is perhaps the only tool that does this managing the whole translation process.

The main advantages of po4a over them are the ease of extra content addition (which is even worse there) and the ability to achieve gettextization.

SUMMARY of the advantages of the gettext based approach¶

• The translations are not stored along with the original, which makes it possible to detect if translations become out of date.
• The translations are stored in separate files from each other, which prevents translators of different languages from interfering, both when submitting their patch and at the file encoding level.
• It is based internally on gettext (but po4a offers a very simple interface so that you don't need to understand the internals to use it). That way, we don't have to re-implement the wheel, and because of their wide use, we can think that these tools are more or less bug free.
• Nothing changed for the end-user (beside the fact translations will hopefully be better maintained). The resulting documentation file distributed is exactly the same.
• No need for translators to learn a new file syntax and their favorite PO file editor (like Emacs' PO mode, Lokalize or Gtranslator) will work just fine.
• gettext offers a simple way to get statistics about what is done, what should be reviewed and updated, and what is still to do. Some example can be found at those addresses:

   - https://docs.kde.org/stable5/en/kdesdk/lokalize/project-view.html
   - http://www.debian.org/intl/l10n/
      

But everything isn't green, and this approach also has some disadvantages we have to deal with.

• Addenda are… strange at the first glance.
• You can't adapt the translated text to your preferences, like splitting a paragraph here, and joining two other ones there. But in some sense, if there is an issue with the original, it should be reported as a bug anyway.
• Even with an easy interface, it remains a new tool people have to learn.

  One of my dreams would be to integrate somehow po4a to Gtranslator or Lokalize. When a documentation file is opened, the strings are automatically extracted, and a translated file + po file can be written to disk. If we manage to do an MS Word (TM) module (or at least RTF) professional translators may even use it.