NAME¶

SYNOPSIS¶

#include <librpmem.h>
cc ... -lrpmem

    

DESCRIPTION¶

The maximum replicated memory region size can not be bigger than the maximum locked-in-memory address space limit. See memlock in limits.conf(5) for more details.

This library is for applications that use remote persistent memory directly, without the help of any library-supplied transactions or memory allocation. Higher-level libraries that build on libpmem(7) are available and are recommended for most applications, see:

•

libpmemobj(7), a general use persistent memory API, providing memory allocation and transactional operations on variable-sized objects.

TARGET NODE ADDRESS FORMAT¶

[<user>@]<hostname>[:<port>]

    

The target node address is described by the hostname which the client connects to, with an optional user name. The user must be authorized to authenticate to the remote machine without querying for password/passphrase. The optional port number is used to establish the SSH connection. The default port number is 22.

REMOTE POOL ATTRIBUTES¶

#define RPMEM_POOL_HDR_SIG_LEN    8
#define RPMEM_POOL_HDR_UUID_LEN   16
#define RPMEM_POOL_USER_FLAGS_LEN 16
struct rpmem_pool_attr {
    char signature[RPMEM_POOL_HDR_SIG_LEN];
    uint32_t major;
    uint32_t compat_features;
    uint32_t incompat_features;
    uint32_t ro_compat_features;
    unsigned char poolset_uuid[RPMEM_POOL_HDR_UUID_LEN];
    unsigned char uuid[RPMEM_POOL_HDR_UUID_LEN];
    unsigned char next_uuid[RPMEM_POOL_HDR_UUID_LEN];
    unsigned char prev_uuid[RPMEM_POOL_HDR_UUID_LEN];
    unsigned char user_flags[RPMEM_POOL_USER_FLAGS_LEN];
};

    

The signature field is an 8-byte field which describes the pool's on-media format.

The major field is a major version number of the pool's on-media format.

The compat_features field is a mask describing compatibility of pool's on-media format optional features.

The incompat_features field is a mask describing compatibility of pool's on-media format required features.

The ro_compat_features field is a mask describing compatibility of pool's on-media format features. If these features are not available, the pool shall be opened in read-only mode.

The poolset_uuid field is an UUID of the pool which the remote pool is associated with.

The uuid field is an UUID of a first part of the remote pool. This field can be used to connect the remote pool with other pools in a list.

The next_uuid and prev_uuid fields are UUIDs of next and previous replicas respectively. These fields can be used to connect the remote pool with other pools in a list.

The user_flags field is a 16-byte user-defined flags.

SSH¶

For debugging purposes, both the ssh client and the commands executed on the remote node may be overridden by setting the RPMEM_SSH and RPMEM_CMD environment variables, respectively. See ENVIRONMENT for details.

FORK¶

If fork(2) support is not enabled in libibverbs, rpmem_open(3) and rpmem_create(3) will fail. By default, fabric(7) initializes libibverbs with fork(2) support by calling the ibv_fork_init(3) function. See fi_verbs(7) for more details.

CAVEATS¶

librpmem registers a pool as a single memory region. A Chelsio T4 and T5 hardware can not handle a memory region greater than or equal to 8GB due to a hardware bug. So pool_size value for rpmem_create(3) and rpmem_open(3) using this hardware can not be greater than or equal to 8GB.

LIBRARY API VERSIONING¶

The rpmem_check_version() function is used to see if the installed librpmem supports the version of the library API required by an application. The easiest way to do this is for the application to supply the compile-time version information, supplied by defines in <librpmem.h>, like this:

reason = rpmem_check_version(RPMEM_MAJOR_VERSION,
                             RPMEM_MINOR_VERSION);
if (reason != NULL) {
    /* version check failed, reason string tells you why */
}

    

Any mismatch in the major version number is considered a failure, but a library with a newer minor version number will pass this check since increasing minor versions imply backwards compatibility.

An application can also check specifically for the existence of an interface by checking for the version where that interface was introduced. These versions are documented in this man page as follows: unless otherwise specified, all interfaces described here are available in version 1.0 of the library. Interfaces added after version 1.0 will contain the text introduced in version x.y in the section of this manual describing the feature.

When the version check performed by rpmem_check_version() is successful, the return value is NULL. Otherwise the return value is a static string describing the reason for failing the version check. The string returned by rpmem_check_version() must not be modified or freed.

ENVIRONMENT¶

•

RPMEM_SSH=ssh_client

Setting this environment variable overrides the default ssh(1) client command name.

•

RPMEM_CMD=cmd

Setting this environment variable overrides the default command executed on the remote node using either ssh(1) or the alternative remote shell command specified by RPMEM_SSH.

RPMEM_CMD can contain multiple commands separated by a vertical bar (|). Each consecutive command is executed on the remote node in order read from a pool set file. This environment variable is read when the library is initialized, so RPMEM_CMD must be set prior to application launch (or prior to dlopen(3) if librpmem is being dynamically loaded).

•

RPMEM_ENABLE_SOCKETS=0|1

Setting this variable to 1 enables using fi_sockets(7) provider for in-band RDMA connection. The sockets provider does not support IPv6. It is required to disable IPv6 system wide if RPMEM_ENABLE_SOCKETS == 1 and target == localhost (or any other loopback interface address) and SSH_CONNECTION variable (see ssh(1) for more details) contains IPv6 address after ssh to loopback interface. By default the sockets provider is disabled.

•

RPMEM_ENABLE_VERBS=0|1

Setting this variable to 0 disables using fi_verbs(7) provider for in-band RDMA connection. The verbs provider is enabled by default.

•

RPMEM_MAX_NLANES=num

Limit the maximum number of lanes to num. See LANES, in rpmem_create(3), for details.

•

RPMEM_WORK_QUEUE_SIZE=size

Suggest the work queue size. The effective work queue size can be greater than suggested if librpmem requires it or it can be smaller if underlying hardware does not support the suggested size. The work queue size affects the performance of communication to the remote node. rpmem_flush(3) operations can be added to the work queue up to the size of this queue. When work queue is full any subsequent call has to wait till the work queue will be drained. rpmem_drain(3) and rpmem_persist(3) among other things also drain the work queue.

DEBUGGING AND ERROR HANDLING¶

Two versions of librpmem are typically available on a development system. The normal version, accessed when a program is linked using the -lrpmem option, is optimized for performance. That version skips checks that impact performance and never logs any trace information or performs any run-time assertions.

A second version of librpmem, accessed when a program uses the libraries under /usr/lib/pmdk_debug, contains run-time assertions and trace points. The typical way to access the debug version is to set the environment variable LD_LIBRARY_PATH to /usr/lib/pmdk_debug or /usr/lib64/pmdk_debug, as appropriate. Debugging output is controlled using the following environment variables. These variables have no effect on the non-debug version of the library.

•

RPMEM_LOG_LEVEL

The value of RPMEM_LOG_LEVEL enables trace points in the debug version of the library, as follows:

•

0 - This is the default level when RPMEM_LOG_LEVEL is not set. No log messages are emitted at this level.

•

1 - Additional details on any errors detected are logged (in addition to returning the errno-based errors as usual). The same information may be retrieved using rpmem_errormsg().

•

2 - A trace of basic operations is logged.

•

3 - Enables a very verbose amount of function call tracing in the library.

•

4 - Enables voluminous and fairly obscure tracing information that is likely only useful to the librpmem developers.

Unless RPMEM_LOG_FILE is set, debugging output is written to stderr.

•

RPMEM_LOG_FILE

Specifies the name of a file where all logging information should be written. If the last character in the name is “-”, the PID of the current process will be appended to the file name when the log file is created. If RPMEM_LOG_FILE is not set, logging output is written to stderr.

EXAMPLE¶

#include <assert.h>
#include <unistd.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <librpmem.h>
#define POOL_SIGNATURE  "MANPAGE"
#define POOL_SIZE   (32 * 1024 * 1024)
#define NLANES      4
#define DATA_OFF    4096
#define DATA_SIZE   (POOL_SIZE - DATA_OFF)
static void
parse_args(int argc, char *argv[], const char **target, const char **poolset)
{
    if (argc < 3) {
        fprintf(stderr, "usage:\t%s <target> <poolset>\n", argv[0]);
        exit(1);
    }
    *target = argv[1];
    *poolset = argv[2];
}
static void *
alloc_memory()
{
    long pagesize = sysconf(_SC_PAGESIZE);
    if (pagesize < 0) {
        perror("sysconf");
        exit(1);
    }
    /* allocate a page size aligned local memory pool */
    void *mem;
    int ret = posix_memalign(&mem, pagesize, POOL_SIZE);
    if (ret) {
        fprintf(stderr, "posix_memalign: %s\n", strerror(ret));
        exit(1);
    }
    assert(mem != NULL);
    return mem;
}
int
main(int argc, char *argv[])
{
    const char *target, *poolset;
    parse_args(argc, argv, &target, &poolset);
    unsigned nlanes = NLANES;
    void *pool = alloc_memory();
    int ret;
    /* fill pool_attributes */
    struct rpmem_pool_attr pool_attr;
    memset(&pool_attr, 0, sizeof(pool_attr));
    strncpy(pool_attr.signature, POOL_SIGNATURE, RPMEM_POOL_HDR_SIG_LEN);
    /* create a remote pool */
    RPMEMpool *rpp = rpmem_create(target, poolset, pool, POOL_SIZE,
            &nlanes, &pool_attr);
    if (!rpp) {
        fprintf(stderr, "rpmem_create: %s\n", rpmem_errormsg());
        return 1;
    }
    /* store data on local pool */
    memset(pool, 0, POOL_SIZE);
    /* make local data persistent on remote node */
    ret = rpmem_persist(rpp, DATA_OFF, DATA_SIZE, 0, 0);
    if (ret) {
        fprintf(stderr, "rpmem_persist: %s\n", rpmem_errormsg());
        return 1;
    }
    /* close the remote pool */
    ret = rpmem_close(rpp);
    if (ret) {
        fprintf(stderr, "rpmem_close: %s\n", rpmem_errormsg());
        return 1;
    }
    free(pool);
    return 0;
}

    

NOTE¶

ACKNOWLEDGEMENTS¶

SEE ALSO¶